Publications

This study presents an innovative home energy management system (HEMS) that incorporates PV WTs and hybrid backup storage systems including a hydrogen storage system (HSS) a battery energy storage system (BESS) and electric vehicles (EVs) with vehicle-to-home (V2H) technology. The research conducted in Liaoning Province China evaluates the performance of the HEMS under various demand response (DR) scenarios aiming to enhance resilience efficiency and energy independence in green buildings. Four DR scenarios were analyzed: No DR 20% DR 30% DR and 40% DR. The findings indicate that implementing DR programs significantly reduces peak load and operating costs. The 40% DR scenario achieved the lowest cumulative operating cost of $749.09 reflecting a 2.34% reduction compared with the $767.07 cost in the No DR scenario. The integration of backup systems particularly batteries and fuel cells (FCs) effectively managed energy supply ensuring continuous power availability. The system maintained a low loss of power supply probability (LPSP) indicating high reliability. Advanced optimization techniques particularly the reptile search algorithm (RSA) are crucial in enhancing system performance and efficiency. These results underscore the potential of hybrid backup storage systems with V2H technology to enhance energy independence and sustainability in residential energy management.

Future liquid hydrogen-powered aircraft requires the design and optimization of a large number of systems and subsystems with cryogenic tanks being one of the largest and most critical. Considering previous space applications these tanks are usually stiffened by internal members such as stringers frames and stiffeners resulting in a complex geometry that leads to an eventual reduction in weight. Cryogenic tanks experience a variety of mechanical and thermal loading conditions and are usually constructed out of several different materials. The complexity of the geometry and the loads highlights the necessity for a computational tool in order to conduct analysis. In this direction the present work describes the development of a multi-physics finite element digital simulation conducting heat transfer and structural analysis in a fully parametric manner in order to be able to support the investigation of different design concepts materials geometries etc. The capabilities of the developed model are demonstrated by the design process of an independent-type aluminum 2219 cryogenic tank for commuter aircraft applications. The designed tank indicates a potential maximum take-off weight reduction of about 8% for the commuter category and demonstrates that aluminum alloys are serious candidate materials for future aircraft.

Hydrogen technologies are evolving to decarbonise the transport sector. The present work focuses on the technical design of a Hydrogen Refueling Station to supply hydrogen to five buses in the city of Valencia Spain. The study deals with the technical selection of the components from production to consumption setting an efficient standardisation method. Different calculation are used to size the storage systems for 70.8 kg of hydrogen produced by the elecrolyser daily. For the high-pressure storage system massive and cascade methods are proposed being the last one more efficient (1577.53 Nm3 non usable volume compared to 9948.95 Nm3 of the massive method).

The large-scale deployment of technologies that enable energy from renewables is essential for a successful transition to a carbon-neutral future. While photovoltaic panels are one of the main technologies commonly used for harvesting energy from the Sun storage of renewable solar energy still presents some challenges and often requires integration with additional devices. It is believed that hydrogen – being a perfect energy carrier – can become one of the broadly utilised storage alternatives that would effectively mitigate the energy supply and demand issues associated with the intermittent nature of renewable energy sources. Current pathways in the development of green technologies indicate the need for more sustainable material utilisation and more efficient device operation. To address this requirement integration of various technologies for renewable energy harvesting conversion and storage in a single device appears as an advantageous option. From the hydrogen economy perspective systems driven by green solar electricity that allow for (photo)electrochemical water splitting would generate hydrogen with the minimal CO2 footprint. If at the same time one of the device electrodes could store the generated gas and release it on demand the utilisation of critical and often costly elements would be reduced with possible gain in more effective device operation. Although conceptually attractive this cross-disciplinary concept has not gained yet enough attention and only limited number of experimental setups have been designed tested and reported. This review presents the first exhaustive overview and critical examination of various laboratory-scale prototype setups that attempt to combine both the hydrogen production and storage processes in a single unit via integration of a metal hydride-based electrode into a photoelectrochemical cell. The architectures of presented configurations enables direct solar energy to hydrogen conversion and its subsequent storage in a single device which – in some cases – can also release the stored (hydrogen) energy on demand. In addition this work explores perspectives and challenges related with the potential upscaling of reviewed solar-to-hydrogen storage systems trying to map and indicate the main future directions of their technological development and optimization. Finally the review also combines information and expertise scattered among various research fields with the aim of stimulating much-needed exchange of knowledge to accelerate the progress in the development and deployment of optimum green hydrogen-based solutions.

The HyDeploy2 project seeks to address a key issue for UK energy customers: how to reduce the carbon they emit in heating their homes. The UK has a world class gas grid delivering heat conveniently and safely to more than 83% of homes. Emissions can be reduced by lowering the carbon content of gas through blending with hydrogen. This delivers carbon savings without customers requiring disruptive and expensive changes in their homes. It also provides the platform for deeper carbon savings by enabling wider adoption of hydrogen across the energy system.

Green hydrogen production is expected to play a major role in the context of the shift towards sustainable energy stipulated in the Fit for 55 package. Green hydrogen and its derivatives have the capacity to act as effective energy storage vectors while fuel cell-powered vehicles will foster net-zero emission mobility. This study evaluates the potential of green hydrogen production in Power-to-Gas (P2G) systems operated in former mining sites where sand and gravel aggregate has been extracted from lakes and rivers under wet conditions (below the water table). The potential of hydrogen production was assessed for the selected administrative unit in Poland the West Pomerania province. Attention is given to the legal and organisational aspects of operating mining companies to identify the sites suitable for the installation of floating photovoltaic facilities by 2050. The method relies on the use of GIS tools which utilise geospatial data to identify potential sites for investments. Basing on the geospatial model and considering technical and organisational constraints the schedule was developed showing the potential availability of the site over time. Knowing the surface area of the water reservoir the installed power of the floating photovoltaic plant and the production capacity of the power generation facility and electrolysers the capacity of hydrogen production in the P2G system can be evaluated. It appears that by 2050 it should be feasible to produce green fuel in the P2G system to support a fleet of city buses for two of the largest urban agglomerations in the West Pomerania province. Simulations revealed that with a water coverage ratio increase and the planned growth of green hydrogen generation it should be feasible to produce fuel for net-zero emission urban mobility systems to power 200 buses by 2030 550 buses by 2040 and 900 buses by 2050 (for the bus models Maxi (40 seats) and Mega (60 seats)). The results of the research can significantly contribute to the development of projects focused on the production of green hydrogen in a decentralised system. The disclosure of potential and available locations over time can be compared with competitive solutions in terms of spatial planning environmental and societal impact and the economics of the undertaking.

Modern energy conversion technologies with low or no emissions are needed to achieve sustainable development goals. This research examines the thermodynamic and exergy-economic features of a high-temperature proton exchange membrane fuel cell. A cutting-edge integrated energy system uses high-temperature proton exchange membrane fuel cells an organic Rankine cycle a proton exchange membrane electrolyzer and a multi-effect desalination unit. This setup generates electricity hydrogen and fresh water. Methanol-steam reformation produces hydrogen for the fuel cell. The recommended cycle drives an organic Rankine power producing cycle using 120-200 °C waste heat from hightemperature proton exchange membrane fuel cell to power water electrolysis and hydrogen generation. An integrated method incorporates energy and exergy balances and cost analysis to assess the proposed system's exergetic economic and environmental impacts. The suggested integration delivers high energy and exergy efficiency at an acceptable cost and environmental effect. According to parametric research boosting the fuel cell's working temperature decreases production costs and carbon dioxide emissions per mass. Raising current density has positive technical and environmental impacts. As the current density increases from 0.4 to 0.8 (A/cm2 ) the net power generation increases to 46.67% and the exergy efficiency increases from 64.5% to 68%. An increase in multi-effect distillation motivate steam pressure from 200 to 600 kPa results in an increase in the daily freshwater generated from 111.68 m3 to 116.41 m3 . For environmental protection and output optimization fuel utilization ratio must be reduced. The ideal system's exergy efficiency product unit cost and environmental impact are 65.78% 86.28 ($/h) and 4.33% respectively.

To achieve a more ecologically friendly energy transition by the year 2050 under the European “green” accord hydrogen has recently gained significant scientific interest due to its efficiency as an energy carrier. This paper focuses on large-scale hydrogen production systems based on marine renewable-energy-based wind turbines and tidal turbines. The paper reviews the different technologies of hydrogen production using water electrolyzers energy storage unit base hydrogen vectors and fuel cells (FC). The focus is on large-scale hydrogen production systems using marine renewable energies. This study compares electrolyzers energy storage units and FC technologies with the main factors considered being cost sustainability and efficiency. Furthermore a review of aging models of electrolyzers and FCs based on electrical circuit models is drawn from the literature and presented including characterization methods of the model components and the parameters extraction methods using a dynamic current profile. In addition industrial projects for producing hydrogen from renewable energies that have already been completed or are now in progress are examined. The paper is concluded through a summary of recent hydrogen production and energy storage advances as well as some applications. Perspectives on enhancing the sustainability and efficiency of hydrogen production systems are also proposed and discussed. This paper provides a review of behavioral aging models of electrolyzers and FCs when integrated into hydrogen production systems as this is crucial for their successful deployment in an ever-changing energy context. We also review the EU’s potential for renewable energy analysis. In summary this study provides valuable information for research and industry stakeholders aiming to promote a sustainable and environmentally friendly energy transition.

Our previous reported experiments revealed that the reflection of high-speed deflagrations in hydrogenair and hydrogen-oxygen mixtures produces higher mechanical loading and reflected pressures than reflecting detonations. This surprising result was shown to correlate with the onset of detonation in the gases behind the reflected shock. We revisit these experiments with the aim of developing a closed-form model for the pressure evolution due to the shock-induced ignition and rapid transition to detonation. We find that the reflection condition of fast deflagrations corresponds to the chain-branching crossover regime of hydrogen ignition in which the reduced activation energy is very large and the reaction characteristic time is very short compared to the induction time. We formulate a closed-form model in the limit of fast reaction times as compared to the induction time which is used to predict a square wave pressure profile generated by self-similar propagation of internal Chapman-Jouguet detonation waves followed by Taylor expansion waves. The model predictions are compared with Navier-Stokes numerical simulations with full chemistry as well as simple Euler calculations using calibrated one-step or twostep chain-branching models. Both simplified numerical models were found to be in good agreement with the full chemistry model. We thus demonstrate that the end pressure evolution due to the reflection of high-speed deflagrations can be well predicted analytically and numerically using relatively simple models in this ignition regime of main interest for safety analysis and explosion mitigations. The slight departures from the square wave model are investigated based on the physical wave processes occurring in the shocked gases controlling the shock-to-detonation transition. Using the two-step model we study how the variations of the rate of energy release control the pressure evolution in the end gas extending the analysis of Sharpe to very large rates of energy release.

One such technology is hydrogen-based which utilizes hydrogen to generate energy without emission of greenhouse gases. The advantage of such technology is the fact that the only by-product is water. Efficient storage is crucial for the practical application of hydrogen. There are several techniques to store hydrogen each with certain advantages and disadvantages. In gaseous hydrogen storage hydrogen gas is compressed and stored at high pressures requiring robust and expensive pressure vessels. In liquid hydrogen storage hydrogen is cooled to extremely low temperatures and stored as a liquid which is energy-intensive. Researchers are exploring advanced materials for hydrogen storage including metal hydrides carbonbased materials metal–organic frameworks (MOFs) and nanomaterials. These materials aim to enhance storage capacity kinetics and safety. The hydrogen economy envisions hydrogen as a clean energy carrier utilized in various sectors like transportation industry and power generation. It can contribute to decarbonizing sectors that are challenging to electrify directly. Hydrogen can play a role in a circular economy by facilitating energy storage supporting intermittent renewable sources and enabling the production of synthetic fuels and chemicals. The circular economy concept promotes the recycling and reuse of materials aligning with sustainable development goals. Hydrogen availability depends on the method of production. While it is abundant in nature obtaining it in a clean and sustainable manner is crucial. The efficiency of hydrogen production and utilization varies among methods with electrolysis being a cleaner but less efficient process compared to other conventional methods. Chemisorption and physisorption methods aim to enhance storage capacity and control the release of hydrogen. There are various viable options that are being explored to solve these challenges with one option being the use of a multilayer film of advanced metals. This work provides an overview of hydrogen economy as a green and sustainable energy system for the foreseeable future hydrogen production methods hydrogen storage systems and mechanisms including their advantages and disadvantages and the promising storage system for the future. In summary hydrogen holds great promise as a clean energy carrier and ongoing research and technological advancements are addressing challenges related to production storage and utilization bringing us closer to a sustainable hydrogen economy.