- Home
- A-Z Publications
- Publications
Publications
The Hydrogen Bike: Communicating the Production and Safety of Green Hydrogen
Mar 2021
Publication
As the international community aims to reduce its reliance on fossil fuels green hydrogen has great potential to replace methane as a clean source of fuel. A novel public engagement activity The Hydrogen Bike has been developed to demonstrate the production and use of green hydrogen from water. The aim of the activity is to educate entertain and inform young people and adults so that they have an opportunity to form an opinion about the use of hydrogen as a fuel. Using a novel two-part data collection system participants are briefly surveyed for their opinion on hydrogen before and after participating in The Hydrogen Bike activity. Through this we have found that most participants (73%) are considered to have no opinion or a neutral opinion on hydrogen before participating in The Hydrogen Bike activity. After participation 88% of those who were originally neutral or had no opinion on hydrogen self-reported a positive feeling about hydrogen. The method of data collection was quick intuitive and suitable for an audience attracted from passing footfall.
Blue Hydrogen Production from Natural Gas Reservoirs: A Review of Application and Feasibility
Feb 2023
Publication
Recently interest in developing H2 strategies with carbon capture and storage (CCS) technologies has surged. Considering that this paper reviews recent literature on blue H2 a potential low-carbon short-term solution during the H2 transition period. Three key aspects were the focus of this paper. First it presents the processes used for blue H2 production. Second it presents a detailed comparison between blue H2 and natural gas as fuels and energy carriers. The third aspect focuses on CO2 sequestration in depleted natural gas reservoirs an essential step for implementing blue H2. Globally ~ 75% of H2 is produced using steam methane reforming which requires CCS to obtain blue H2. Currently blue H2 needs to compete with other advancing technologies such as green H2 solar power battery storage etc. Compared to natural gas and liquefied natural gas blue H2 gas results in lower CO2 emissions since CCS is applied. However transporting liquefied and compressed blue H2 entails higher energy economic and environmental costs. CCS must be appropriately implemented to produce blue H2 successfully. Due to their established capacity to trap hydrocarbons over geologic time scales depleted natural gas reservoirs are regarded as a viable option for CCS. Such a conclusion is supported by several simulation studies and field projects in many countries. Additionally there is much field experience and knowledge on the injection and production performance of natural gas reservoirs. Therefore using the existing site infrastructure converting these formations into storage reservoirs is undemanding.
On the Technology of Solid Oxide Fuel Cell (SOFC) Energy Systems for Stationary Power Generation: A Review
Nov 2022
Publication
This paper presents a comprehensive overview on the current status of solid oxide fuel cell (SOFC) energy systems technology with a deep insight into the techno-energy performance. In recent years SOFCs have received growing attention in the scientific landscape of high efficiency energy technologies. They are fuel flexible highly efficient and environmentally sustainable. The high working temperature makes it possible to work in cogeneration and drive downstream bottomed cycles such as Brayton and Hirn/Rankine ones thus configuring the hybrid system of a SOFC/turbine with very high electric efficiency. Fuel flexibility makes SOFCs independent from pure hydrogen feeding since hydrocarbons can be fed directly to the SOFC and then converted to a hydrogen rich stream by the internal thermochemical processes. SOFC is also able to convert carbon monoxide electrochemically thus contributing to energy production together with hydrogen. SOFCs are much considered for being supplied with biofuels especially biogas and syngas so that biomass gasifiers/SOFC integrated systems contribute to the “waste to energy” chain with a significant reduction in pollution. The paper also deals with the analysis of techno-energy performance by means of ad hoc developed numerical modeling in relation to the main operating parameters. Ample prominence is given to the aspect of fueling emphasizing fuel processing with a deep discussion on the impurities and undesired phenomena that SOFCs suffer. Constituent materials geometry and design methods for the balance of plant were studied. A wide analysis was dedicated to the hybrid system of the SOFC/turbine and to the integrated system of the biomass gasifier/SOFC. Finally an overview of SOFC system manufacturing companies on SOFC research and development worldwide and on the European roadmap was made to reflect the interest in this technology which is an important signal of how communities are sensitive toward clean low carbon and efficient technologies and therefore to provide a decisive and firm impulse to the now outlined energy transition.
The Viability of Implementing Hydrogen in the Commonwealth of Massachusetts
Sep 2022
Publication
In recent years there has been an increased interest in hydrogen energy due to a desire to reduce greenhouse gas emissions by utilizing hydrogen for numerous applications. Some countries (e.g. Japan Iceland and parts of Europe) have made great strides in the advancement of hydrogen generation and utilization. However in the United States there remains significant reservation and public uncertainty on the use and integration of hydrogen into the energy ecosystem. Massachusetts similar to many other states and small countries faces technical infrastructure policy safety and acceptance challenges with regards to hydrogen production and utilization. A hydrogen economy has the potential to provide economic benefits a reduction in greenhouse gas emissions and sector coupling to provide a resilient energy grid. In this paper the issues associated with integrating hydrogen into Massachusetts and other similar states or regions are studied to determine which hydrogen applications have the most potential understand the technical and integration challenges and identify how a hydrogen energy economy may be beneficial. Additionally hydrogen’s safety concerns and possible contribution to greenhouse gas emissions are also reviewed. Ultimately a set of eight recommendations is made to guide the Commonwealth’s consideration of hydrogen as a key component of its policies on carbon emissions and energy.
Prediction of Mixing Uniformity of Hydrogen Injection in Natural Gas Pipeline Based on a Deep Learning Model
Nov 2022
Publication
It is economical and efficient to use existing natural gas pipelines to transport hydrogen. The fast and accurate prediction of mixing uniformity of hydrogen injection in natural gas pipelines is important for the safety of pipeline transportation and downstream end users. In this study the computational fluid dynamics (CFD) method was used to investigate the hydrogen injection process in a T-junction natural gas pipeline. The coefficient of variation (COV) of a hydrogen concentration on a pipeline cross section was used to quantitatively characterize the mixing uniformity of hydrogen and natural gas. To quickly and accurately predict the COV a deep neural network (DNN) model was constructed based on CFD simulation data and the main influencing factors of the COV including flow velocity hydrogen blending ratio gas temperature flow distance and pipeline diameter ratio were taken as input nodes of the DNN model. In the model training process the effects of various parameters on the prediction accuracy of the DNN model were studied and an accurate DNN architecture was constructed with an average error of 4.53% for predicting the COV. The computational efficiency of the established DNN model was also at least two orders of magnitude faster than that of the CFD simulations for predicting the COV.
The Vision of France, Germany, and the European Union on Future Hydrogen Energy Research and Innovation
Jul 2021
Publication
Hydrogen (H2) is an essential vector for freeing our societies from fossil fuels and effectively initiating the energy transition. Offering high energy density hydrogen can be used for mobile stationary or industrial applications of all sizes. This perspective on the crucial role of hydrogen is shared by a growing number of countries worldwide (e.g. China Germany Japan Republic of Korea Australia and United States) which are publishing ambitious roadmaps for the development of hydrogen and fuel cell technologies supported by substantial financial efforts.
Review of Energy Portfolio Optimization in Energy Markets Considering Flexibility of Power-to-X
Mar 2023
Publication
Power-to-X is one of the most attention-grabbing topics in the energy sector. Researchers are exploring the potential of harnessing power from renewable technologies and converting it into fuels used in various industries and the transportation sector. With the current market and research emphasis on Power-to-X and the accompanying substantial investments a review of Power-to-X is becoming essential. Optimization will be a crucial aspect of managing an energy portfolio that includes Power-to-X and electrolysis systems as the electrolyzer can participate in multiple markets. Based on the current literature and published reviews none of them adequately showcase the state-of-the-art optimization algorithms for energy portfolios focusing on Power-to-X. Therefore this paper provides an in-depth review of the optimization algorithms applied to energy portfolios with a specific emphasis on Power-to-X aiming to uncover the current state-of-the-art in the field.
Innovative Technology Strategies for the Sustainable Development of Self-Produced Energy in the Colombian Industry
Mar 2023
Publication
This research studies the current state of the Colombian industrial sector which is focused on self-generation processes. The study’s objective is to search for viable technological strategies that strengthen this particular sector’s competitiveness and sustainable development. The analysis shows that internal combustion engines represent 49% of the technologies used for self-generation. The main fuel used in the sector is natural gas with a percentage of 56%. The lack of strategies for the use of residual heat and technological inefficiencies caused a loss of 36% in the energy used in the Colombian industrial sector. Thermoelectric generators are a feasible way to recover energy from exhaust gases in engines used for self-generation. Additionally they allow a 4% reduction in fuel consumption and an improvement in the engine’s energy efficiency. The use of hydrogen as fuel allows a 30% reduction in polluting emissions such as CO2 CO HC and particulate matter. Hydrogen production processes such as water electrolysis allow the participation of Colombia’s solar energy potential leading to sustainable hydrogen production efficiency (60–80%) and a lower economic cost. In general the application of thermoelectric generators and the use of hydrogen gas allow the improvement of the Colombian industrial sector’s environmental social and economic aspects due to greater competitiveness and the reduction in emissions and operating costs.
Study on the Use of Fuel Cells in Shipping
Jan 2017
Publication
Fuel Cells are a promising technology in the context of clean power sustainability and alternative fuels for shipping. Different specific developments on Fuel Cells are available today with research and pilot projects under evaluation that have revealed strong potential for further scaled up implementation. The EMSA Study on the use of Fuel Cells in Shipping has been the result of this Agency’s initiative under the agreement of the Commission and in support of EU Member States an important instrument developed in close partnership with DNV-GL.
Notwithstanding the close dependency of Fuel Cell technology and the development of hydrogen fuel solutions different solutions are today in place making use of LNG methanol and other low flashpoint fuels. EMSA participates in support of the Commission in the 2nd phase development of the IGF Code where provisions for Fuel Cells are to be included as a new part of the text.
The EMSA Study on the use of Fuel Cells in Shipping includes a technology and regulatory review identifying gaps to be further explored the selection of the most promising Fuel Cell technologies for shipping and finally a generic Safety Assessment where the selected technologies are evaluated according to Risk & Safety aspects in generic ship design applications.
Notwithstanding the close dependency of Fuel Cell technology and the development of hydrogen fuel solutions different solutions are today in place making use of LNG methanol and other low flashpoint fuels. EMSA participates in support of the Commission in the 2nd phase development of the IGF Code where provisions for Fuel Cells are to be included as a new part of the text.
The EMSA Study on the use of Fuel Cells in Shipping includes a technology and regulatory review identifying gaps to be further explored the selection of the most promising Fuel Cell technologies for shipping and finally a generic Safety Assessment where the selected technologies are evaluated according to Risk & Safety aspects in generic ship design applications.
Multi-Objective Optimization-Based Health-Conscious Predictive Energy Management Strategy for Fuel Cell Hybrid Electric Vehicles
Feb 2022
Publication
The Energy Management Strategy (EMS) in Fuel Cell Hybrid Electric Vehicles (FCHEVs) is the key part to enhance optimal power distribution. Indeed the most recent works are focusing on optimizing hydrogen consumption without taking into consideration the degradation of embedded energy sources. In order to overcome this lack of knowledge this paper describes a new health-conscious EMS algorithm based on Model Predictive Control (MPC) which aims to minimize the battery degradation to extend its lifetime. In this proposed algorithm the health-conscious EMS is normalized in order to address its multi-objective optimization. Then weighting factors are assigned in the objective function to minimize the selected criteria. Compared to most EMSs based on optimization techniques this proposed approach does not require any information about the speed profile which allows it to be used for real-time control of FCHEV. The achieved simulation results show that the proposed approach reduces the economic cost up to 50% for some speed profile keeping the battery pack in a safe range and significantly reducing energy sources degradation. The proposed health-conscious EMS has been validated experimentally and its online operation ability clearly highlighted on a PEMFC delivery postal vehicle.
Research on the Primary Frequency Regulation Control Strategy of a Wind Storage Hydrogen-Generating Power Station
Nov 2022
Publication
Wind curtailment and weak inertia characteristics are two factors that shackle the permeability of wind power. An electric hydrogen production device consumes electricity to produce hydrogen under normal working conditions to solve the problem of abandoning wind. When participating in frequency regulation it serves as a load reduction method to assist the system to rebuild a power balance and improve the wind power permeability. However due to its own working characteristics an electric hydrogen production device cannot undertake the high-frequency component of the frequency regulation power command; therefore an energy storage device was selected to undertake a high-frequency power command to assist the electric hydrogen production device to complete the system frequency regulation. This paper first proposes and analyzes the architecture of a wind storage hydrogen-generating station for centralized hydrogen production with a distributed energy storage and proposes the virtual inertia and droop characteristic mechanism of the wind storage hydrogen-generating station to simulate a synchronous unit. Secondly an alkaline electrolysis cell suitable for large-scale engineering applications is selected as the research object and its mathematical model is established the matching between different energy storage devices and their cooperation in power grid frequency regulation is analyzed and a super capacitor is selected. A control strategy for the wind storage hydrogen-generating power station to participate in power grid frequency regulation with a wide time scale is then proposed. Using the first-order low-pass filter the low-frequency component of the frequency regulation power command is realized by an electric hydrogen production device load reduction and a high-frequency component is realized by the energy storage device. Finally the effectiveness and rationality of the proposed control strategy are verified by establishing the simulation model of the wind storage hydrogen-generating power station with different initial wind speed states comparing the system frequency dip values under the proposed multi-energy cooperative control strategy and a single energy device control strategy.
Performance Assessment of a Solar Powered Hydrogen Production System and its ANFIS Model
Oct 2020
Publication
Apart from many limitations the usage of hydrogen in different day-to-day applications have been increasing drastically in recent years. However numerous techniques available to produce hydrogen electrolysis of water is one of the simplest and cost-effective hydrogen production techniques. In this method water is split into hydrogen and oxygen by using external electric current. In this research a novel hydrogen production system incorporated with Photovoltaic – Thermal (PVT) solar collector is developed. The influence of different parameters like solar collector tilt angle thermal collector design and type of heat transfer fluid on the performance of PVT system and hydrogen production system are also discussed. Finally thermal efficiency electrical efficiency and hydrogen production rate have been predicted by using the Adaptive Neuro-Fuzzy Inference System (ANFIS) technique. Based on this study results it can be inferred that the solar collector tilt angle plays a significant role to improve the performance of the electrical and thermal performance of PVT solar system and Hydrogen yield rate. On the other side the spiral-shaped thermal collector with water exhibited better end result than the other hydrogen production systems. The predicted results ANFIS techniques represent an excellent agreement with the experimental results. In consequence it is suggested that the developed ANFIS model can be adopted for further studies to predict the performance of the hydrogen production system.
Optimal Capacity Planning of Power to Hydrogen in Integrated Electricity–Hydrogen–Gas Energy Systems Considering Flexibility and Hydrogen Injection
Apr 2022
Publication
With increasing penetration of renewable energy it is important to source adequate system flexibility to maintain security of supply and minimize renewable generation curtailment. Power to hydrogen (P2H) plays an important role in the low-carbon renewable dominated energy systems. By blending green hydrogen produced from renewable power into the natural gas pipelines it is possible to help integrate large-scale intermittent generation and smooth the variability of renewable power output through the interconnection of the natural gas network hydrogen energy network and electric network. A two-stage stochastic mixed-integer nonlinear planning framework for P2H sizing and siting is proposed in this paper considering system flexibility requirements. The problem is then reduced to a mixed-integer second-order cone (MISOC) model through convex transformation techniques in order to reduce the computation burden. Then a distributed algorithm based on Bender’s decomposition is applied to obtain the optimal solution. A modified hybrid IEEE 33-node and Gas 20-node system is then used for simulation tests. The results showed that investment of P2H can significantly reduce the total capital and operational costs with lower renewable generation curtailment and electricity demand shedding. Numerical tests demonstrated to demonstrate the validity of the proposed MISOC model.
Evaluating Fuel Cell vs. Battery Electric Trucks: Economic Perspectives in Alignment with China’s Carbon Neutrality Target
Mar 2024
Publication
The electrification of heavy-duty trucks stands as a critical and challenging cornerstone in the low-carbon transition of the transportation sector. This paper employs the total cost of ownership (TCO) as the economic evaluation metric framed within the context of China’s ambitious goals for heavy truck electrification by 2035. A detailed TCO model is developed encompassing not only the vehicles but also their related energy replenishing infrastructures. This comprehensive approach enables a sophisticated examination of the economic feasibility for different deployment contexts of both fuel cell and battery electric heavy-duty trucks emphasizing renewable energy utilization. This study demonstrates that in the context where both fuel cell components and hydrogen energy are costly fuel cell trucks (FCTs) exhibit a significantly higher TCO compared to battery electric trucks (BETs). Specifically for a 16 ton truck with a 500 km range the TCO for the FCT is 0.034 USD/tkm representing a 122% increase over its BET counterpart. In the case of a 49 ton truck designed for a 1000 km range the TCO for the FCT is 0.024 USD/tkm marking a 36% premium compared to the BET model. The technological roadmap suggests a narrowing cost disparity between FCTs and BETs by 2035. For the aforementioned 16 ton truck model the projected TCO for the FCT is expected to be 0.016 USD/tkm which is 58% above the BET and for the 49 ton variant it is anticipated at 0.012 USD per ton-kilometer narrowing the difference to just 4.5% relative to BET. Further analysis within this study on the influences of renewable energy pricing and operational range on FCT and BET costs highlights a pivotal finding: for the 49 ton truck achieving TCO parity between FCTs and BETs is feasible when renewable energy electricity prices fall to 0.022 USD/kWh or when the operational range extends to 1890 km. This underscores the critical role of energy costs and efficiency in bridging the cost gap between FCTs and BETs.
Power Scheduling Optimization Method of Wind-Hydrogen Integrated Energy System Based on the Improved AUKF Algorithm test2
Nov 2022
Publication
With the proposal of China’s green energy strategy the research and development technologies of green energy such as wind energy and hydrogen energy are becoming more and more mature. However the phenomenon of wind abandonment and anti-peak shaving characteristics of wind turbines have a great impact on the utilization of wind energy. Therefore this study firstly builds a distributed wind-hydrogen hybrid energy system model then proposes the power dispatching optimization technology of a wind-hydrogen integrated energy system. On this basis a power allocation method based on the AUKF (adaptive unscented Kalman filter) algorithm is proposed. The experiment shows that the power allocation strategy based on the AUKF algorithm can effectively reduce the incidence of battery overcharge and overdischarge. Moreover it can effectively deal with rapid changes in wind speed. The wind hydrogen integrated energy system proposed in this study is one of the important topics of renewable clean energy technology innovation. Its grid-connected power is stable with good controllability and the DC bus is more secure and stable. Compared with previous studies the system developed in this study has effectively reduced the ratio of abandoned air and its performance is significantly better than the system with separate grid connected fans and single hydrogen energy storage. It is hoped that this research can provide some solutions for the research work on power dispatching optimization of energy systems.
Propulsion System Integration for a First-generation Hydrogen Civil Airliner?
May 2021
Publication
An unusual philosophical approach is proposed here to decarbonise larger civil aircraft that fly long ranges and consume a large fraction of civil aviation fuel. These inject an important amount of carbon emissions into the atmosphere and holistic decarbonising solutions must consider this sector. A philosophical–analytical investigation is reported here on the feasibility of an airliner family to fly over long ranges and assist in the elimination of carbon dioxide emissions from civil aviation. Backed by state-of-the-art correlations and engine performance integration analytical tools a family of large airliners is proposed based on the development and integration of the body of a very large two-deck four-engine airliner with the engines wings and flight control surfaces of a very long-range twin widebody jet. The proposal is for a derivative design and not a retrofit. This derivative design may enable a swifter entry to service. The main contribution of this study is a philosophical one: a carefully evaluated aircraft family that appears to have very good potential for first-generation hydrogen-fuelled airliners using gas turbine engines for propulsion. This family offers three variants: a 380-passenger aircraft with a range of 3300nm a 330-passenger aircraft with a range of 4800nm and a 230- passenger aircraft with a range of 5500nm. The latter range is crucially important because it permits travel from anywhere in the globe to anywhere else with only one stop. The jet engine of choice is a 450kN high-bypass turbofan.
Well-To-Wheels Analysis of Future Automotive Fuels and Powertrains in the European Context
Jun 2014
Publication
The Well-to-Tank study describes the process of producing transporting manufacturing and distributing a number of fuels suitable for road transport powertrains. It covers all steps from extracting capturing or growing the primary energy carrier to refuelling the vehicles with the finished fuel.
An On-Board Pure H2 Supply System Based on A Membrane Reactor for A Fuel Cell Vehicle: A Theoretical Study
Jul 2020
Publication
In this novel conceptual fuel cell vehicle (FCV) an on-board CH4 steam reforming (MSR) membrane reformer (MR) is considered to generate pure H2 for supplying a Fuel Cell (FC) system as an alternative to the conventional automobile engines. Two on-board tanks are forecast to store CH4 and water useful for feeding both a combustion chamber (designed to provide the heat required by the system) and a multi tubes Pd-Ag MR useful to generate pure H2 via methane steam reforming (MSR) reaction. The pure H2 stream is hence supplied to the FC. The flue gas stream coming out from the combustion chamber is used to preheat the MR feed stream by two heat exchangers and one evaporator. Then this theoretical work demonstrates by a 1-D model the feasibility of the MR based system in order to generate 5 kg/day of pure H2 required by the FC system for cruising a vehicle for around 500 km. The calculated CH4 and water consumptions were 50 and 70 kg respectively per 1 kg of pure H2. The on-board MR based FCV presents lower CO2 emission rates than a conventional gasoline-powered vehicle also resulting in a more environmentally friendly solution.
Can the Hydrogen Economy Concept be the Solution to the Future Energy Crisis?
Feb 2022
Publication
The Hydrogen Economy concept is being proposed as a means of reducing and eventually decarbonising the world’s energy use. It looks to hydrogen as being a replacement for methane (natural gas) and generally as a way of removing all fossil fuels from the energy supply. The concept however has at least four flaws as follows: (1) hydrogen has significantly different properties to methane; (2) hydrogen has properties that create significant hazards; (3) hydrogen has a very small initiation (activation) energy; and (4) liquid hydrogen cannot readily replace liquefied natural gas (LNG). Hydrogen’s hazards will prevent it from being accepted in a societal sense. To the question ‘Can the Hydrogen Economy concept be the solution to the future energy crisis?’ the answer is ‘no’. Hydrogen has and will have a role in world energy but that role will be limited to industry. For the future we need an advanced electric economy.
Hydrogen Production, Storage, Utilisation and Environmental Impacts: A Review
Oct 2021
Publication
Dihydrogen (H2) commonly named ‘hydrogen’ is increasingly recognised as a clean and reliable energy vector for decarbonisation and defossilisation by various sectors. The global hydrogen demand is projected to increase from 70 million tonnes in 2019 to 120 million tonnes by 2024. Hydrogen development should also meet the seventh goal of ‘affordable and clean energy’ of the United Nations. Here we review hydrogen production and life cycle analysis hydrogen geological storage and hydrogen utilisation. Hydrogen is produced by water electrolysis steam methane reforming methane pyrolysis and coal gasification. We compare the environmental impact of hydrogen production routes by life cycle analysis. Hydrogen is used in power systems transportation hydrocarbon and ammonia production and metallugical industries. Overall combining electrolysis-generated hydrogen with hydrogen storage in underground porous media such as geological reservoirs and salt caverns is well suited for shifting excess of-peak energy to meet dispatchable on-peak demand.
No more items...