Publications

The mechanical properties of materials deteriorate when hydrogen embrittlement (HE) occurs seriously threatening the reliability and durability of the hydrogen system. Therefore it is important to summarize the status and development trends of research on HE. This study reviewed 6676 publications concerned with HE from 1997 to 2022 based on the Web of Science Core Collection. VOSviewer was used to conduct the bibliometric analysis and produce visualizations of the publications. The results showed that the number of publications on HE increased after 2007 especially between 2017 and 2019. Japan was the country with the highest numbers of productive authors and citations of publications and the total number of citations of Japanese publications was 24589. Kyushu University was the most influential university and the total number of citations of Kyushu University publications was 7999. Akiyama was the most prolific and influential author publishing 88 publications with a total of 2565 citations. The USA South Korea and some European countries are also leading in HE research; these countries have published more than 200 publications. It was also found that the HE publications generally covered five topics: “Hydrogen embrittlement in different materials” “Effect of hydrogen on mechanical properties of materials” “Effect of alloying elements or microstructure on hydrogen embrittlement” “Hydrogen transport” and “Characteristics and mechanisms of hydrogen related failures”. Research hotspots included “Fracture failure behavior and analysis” “Microstructure” “Hydrogen diffusion and transport” “Mechanical properties” “Hydrogen resistance” and so on. These covered the basic methods and purposes of HE research. Finally the distribution of the main subject categories of the publications was determined and these categories covered various topics and disciplines. This study establishes valuable reference information for the application and development of HE research and provides a convenient resource to help researchers and scholars understand the development trends and research directions in this field.

The present research work aims to present a uniquely designed renewable energy-based integrated system along with an equilibrium model for the processing of feedstock by following a hybrid route of thermochemical and biochemical ways. In this regard Canadian maple leaves and plastic wastes are selected as potential feedstocks for co-pyrolysis and syngas fermentation. The influence of co-pyrolysis process parameters on the overall system performance is investigated and assessed. Also several sensitivity analyses are performed to determine the optimal operating parameters that can generate maximum yields of hydrogen and ethanol. The present system is further investigated thermodynamically in terms of energetic and exergetic approaches and efficiencies. The present study shows that a molar flow ratio of 1:1 for maple leaves to plastic wastes a temperature of 1000◦C temperature and a pressure of 1 bar appear to be the most suitable operating conditions with the net production capacities of 7.43 tons/day for hydrogen and 8.72 tons/day for ethanol. The cold gas efficiency and LHV of the syngas produced are found to be 57.23% and 19.96 MJ/kg respectively. The overall energetic and exergetic efficiencies of the present system are found to be 30.98% and 26.88% respectively.

On this episode of EAH we sat down with Dr. Bo Cerup-Simonsen Chief Executive Officer of the Maersk Mc-Kinney Møller Center for Zero Carbon Shipping. Bo holds a PHD in Naval Architecture and Mechanical Engineering and spent seven years as a research engineer at MIT.

Bo explains the Center's work and we discuss decarbonization of shipping using hydrogen derived green fuels.

The podcast can be found on their website.

The rising technology of green hydrogen supply systems is expected to be on the horizon. Hydrogen is a clean and renewable energy source with the highest energy content by weight among the fuels and contains about six times more energy than ammonia. Meanwhile ammonia is the most popular substance as a green hydrogen carrier because it does not carry carbon and the total hydrogen content of ammonia is higher than other fuels and is thus suitable to convert to hydrogen. There are several pathways for hydrogen production. The considered aspects herein include hydrogen production technologies pathways based on the raw material and energy sources and different scales. Hydrogen can be produced from ammonia through several technologies such as electro-chemical photocatalytic and thermochemical processes that can be used at production plants and fueling stations taking into consideration the conversion efficiency reactors catalysts and their related economics. The commercial process is conducted by using expensive Ru catalysts in the ammonia converting process but is considered to be replaced by other materials such as Ni Co La and other perovskite catalysts which have high commercial potential with equivalent activity for extracting hydrogen from ammonia. For successful engraftment of ammonia to hydrogen technology into industry integration with green technologies and economic methods as well as safety aspects should be carried out.

Low-carbon transition pathways oriented from different transition targets would result in a huge variation of energy system deployment and transition costs. Hydrogen is widely considered as an imperative energy carrier to reach carbon neutral targets. However hydrogen production either from non-fossil power or fossil fuels with carbon capture is closely linked with an energy supply system and has great impacts on its structure. Identifying an economically affordable transition pathway is attractive and energy infrastructure is critical due to massive investment and long life-span. In this paper a multi-regional multi-period and infrastructure-based model is proposed to quantify energy supply system transition costs with different low-carbon targets and hydrogen production alternatives and China is taken as a case study. Results show that fulfilling 2-degree and 1.5-degree temperature increase targets would result in 84% and 151% increases in system transition costs 114% and 246% increases in infrastructure investment and 211% and 339% increases in stranded investment compared to fulfilling stated policy targets. Producing hydrogen from coal would be economical when carbon capture and sequestration cost is lower than 437 yuan per tonne and reduce infrastructure investment and stranded coal investment by 16% and 35% respectively than producing hydrogen from renewable power.

Decarbonised steel enabled by green hydrogen-based iron ore reduction and renewable electricity-based steel making will disrupt the traditional supply chain. Focusing on the energetic and techno-economic assessment of potential green supply chains this study investigates the direct reduced iron-electric arc furnace production route enabled by renewable energy and deployed in regional settings. The hypothesis that co-locating manufacturing processes with renewable energy resources would offer highest energy efficiency and cost reduction is tested through an Australia-Japan case study. The binational partnership is structured to meet Japanese steel demand (for domestic use and regional exports) and source both energy and iron ore from the Pilbara region of Western Australia. A total of 12 unique supply chains differentiated by spatial configuration timeline and energy carrier were simulated which validated the hypothesis: direct energy and ore exports to remote steel producers (i.e. Japan-based production) as opposed to co-locating iron and steel production with abundant ore and renewable energy resources (i.e. Australia-based production) increased energy consumption and the levelised cost of steel by 45% and 32% respectively when averaged across 2030 and 2050. Two decades of technological development and economies of scale realisation would be crucial; 2030 supply chains were on average 12% more energy-intense and 23% more expensive than 2050 equivalents. On energy vectors liquefied hydrogen was more efficient than ammonia for export-dominant supply chains due to the pairing of its process flexibility and the intermittent solar energy profile as well as the avoidance of the need for ammonia cracking prior to direct reduction. To mitigate the green premium a carbon tax in the range of A$66–192/t CO2 would be required in 2030 and A$0–70/t CO2 in 2050; the diminished carbon tax requirement in the latter is achievable only by wholly Australia-based production. Further the modelled system scale was immense; producing 40 Mtpa of decarbonised steel will require 74–129% of Australia’s current electricity output and A$137–328 billion in capital investment for solar power production and shipping vessel infrastructure. These results call for strategic planning of regional resource pairing to drive energy and cost efficiencies which accelerate the global decarbonisation of steel.

The feasibility of the global energy transition may rest on the ability of nations to harness hydrogen's potential for cross-sectoral decarbonization. In countries historically reliant on natural gas for domestic heating and cooking such as the UK hydrogen may prove critical to meeting net-zero targets and strengthening energy security. In response the UK government is targeting industrial decarbonization via hydrogen with parallel interest in deploying hydrogen-fueled appliances for businesses and homes. However prospective hydrogen futures and especially the domestic hydrogen transition face multiple barriers which reflect the cross-sectoral dynamics of achieving economies of scale and social acceptance. Addressing these challenges calls for a deep understanding of socio-technical factors across different scales of the hydrogen economy. In response this paper develops a socio-technical systems framework for overcoming barriers to the domestic transition which is applied to the UK context. The paper demonstrates that future strategies should account for interactions between political techno-economic technical market and social dimensions of the hydrogen transition. In parallel to techno-economic feasibility the right policies will be needed to create an even playing field for green hydrogen technologies while also supporting stakeholder symbiosis and consumer buy-in. Future studies should grapple with how an effective repurposing of pipelines policies and public perceptions can be aligned to accelerate the development of the hydrogen economy with maximum net benefits for society and the environment.

This paper aims to present a pre-feasibility study of a power-to-fuel plant configuration designed for the production of 500 kg/h of renewable methanol (e-methanol) from green hydrogen and captured carbon dioxide. Hydrogen is obtained by water electrolysis employing the overproduction of renewable electricity. Carbon dioxide is assumed to be separated from the flue gas of a conventional power station by means of an amine-based CO2 absorption system. A comprehensive process model has been developed with the support of Aspen Plus tool to simulate all the plant sections and the overall system. After the process optimization a detailed economic analysis – based on capital and operating costs derived from commercial-scale experience and assuming a 20- year lifetime – has been performed to calculate a levelized cost of methanol (LCoM) of 960 €/t (about 175 €/MWh). The analysis confirms that today the technology is still not competitive from the economic point of view being LCoM more than double than the current methanol price in the international market (450 €/t). However it indicates that the process is expected to become competitive in a mid-term future as a consequence of the new European policies. The study also reveals that LCoM is mainly affected by the electricity price and the electrolyser capital cost as well as the capacity factor of the plant.

Instead of storing the energy produced by photovoltaic panels in batteries for later use to power electric loads green hydrogen can also be produced and used in transportation heating and as a natural gas alternative. Green hydrogen is produced in a process called electrolysis. Generally the electrolyser can generate hydrogen from a fluctuating power supply such as renewables. However due to the startup time of the electrolyser and electrolyser degradation accelerated by multiple shutdowns an idle mode is required. When in idle mode the electrolyser uses 10% of the rated electrolyser load. An energy management system (EMS) shall be applied where a storage technology such as a lithium-ion capacitor or lithium-ion battery is used. This paper uses a state-machine EMS of PV microgrid for green hydrogen production and energy storage to manage the hydrogen production during the morning from solar power and in the night using the stored energy in the energy storage which is sized for different scenarios using a lithium-ion capacitor and lithium-ion battery. The mission profile and life expectancy of the lithium-ion capacitor and lithium-ion battery are evaluated considering the system’s local irradiance and temperature conditions in the Australian climate. A tradeoff between storage size and cutoffs of hydrogen production as variables of the cost function is evaluated for different scenarios. The lithium-ion capacitor and lithium-ion battery are compared for each tested scenario for an optimum lifetime. It was found that a lithium-ion battery on average is 140% oversized compared to a lithium-ion capacitor but a lithium-ion capacitor has a smaller remaining capacity of 80.2% after ten years of operation due to its higher calendar aging while LiB has 86%. It was also noticed that LiB is more affected by cycling aging while LiC is affected by calendar aging. However the average internal resistance after 10 years for the lithium-ion capacitor is 264% of the initial internal resistance while for lithium-ion battery is 346% making lithium-ion capacitor a better candidate for energy storage if it is used for grid regulation as it requires maintaining a lower internal resistance over the lifetime of the storage.

Currently hydrogen and electric drives used in various means of transport is a leading topic in many respects. This article discusses the most important aspects of the operation of vehicles with electric drives (passenger cars) and hydrogen drives. In both cases the official reason for using both drives is the possibility of independence from fossil fuel supplies especially oil. The desire for independence is mainly dictated by political considerations. This article discusses the acquisition of basic raw materials for the construction of lithium-ion batteries in electric cars as well as methods for obtaining hydrogen as a fuel. The widespread use of electric passenger cars requires the construction of a network of charging stations. This article shows that taking into account the entire production process of electric cars including lithium-ion batteries the argument that they are ecological cannot be used. Additionally it was indicated that there is no concept for the use of used accumulator batteries. If hydrogen drives are used in trains there is no need to build the traction network infrastructure and then continuously monitor its technical condition and perform the necessary repairs. Of course the necessary hydrogen tanks must be built but there must be similar tanks to store oil for diesel locomotives. This paper also deals with other possibilities of hydrogen application for transformational usage e.g. the use of combustion engines driven with liquid hydrogen. Unfortunately an optimistic approach to this issue does not allow for a critical view of the whole matter. In public discussion there is no room for scientific arguments and emotions to dominate.