Publications

Hydrogen energy and fuel cell technology are critical clean energy roads to pursue carbon neutrality. The proton exchange membrane fuel cell (PEMFC) has a wide range of commercial application prospects due to its simple structure easy portability and quick start-up. However the cost and durability of the PEMFC system are the main barriers to commercial applications of fuel cell vehicles. In this paper the core hydrogen recirculation components of fuel cell vehicles including mechanical hydrogen pumps ejectors and gas–water separators are reviewed in order to understand the problems and challenges in the simulation design and application of these components. The types and working characteristics of mechanical pumps used in PEMFC systems are summarized. Furthermore corresponding design suggestions are given based on the analysis of the design challenges of the mechanical hydrogen pump. The research on structural design and optimization of ejectors for adapting wide power ranges of PEMFC systems is analyzed. The design principle and difficulty of the gas–water separator are summarized and its application in the system is discussed. In final the integration and control of hydrogen recirculation components controlled cooperatively to ensure the stable pressure and hydrogen supply of the fuel cell under dynamic loads are reviewed.

Expanding decarbonization efforts beyond the power sector are contingent on cost-effective production of energy carriers like H2 with near-zero life-cycle carbon emissions. Here we assess the levelized cost of continuous H2 supply (95% availability) at industrial-scale quantities (100 tonnes/day) in 2030 from integrating commodity technologies for solar photovoltaics electrolysis and energy storage. Our approach relies on modeling the least-cost plant design and operation that optimize component sizes while adhering to hourly solar availability production requirements and component inter-temporal operating constraints. We apply the model to study H2 production costs spanning the continental United States and through extensive sensitivity analysis explore system configurations that can achieve $2.5/kg levelized costs or less for a range of plausible 2030 technology projections at high-irradiance locations. Notably we identify potential sites and system configurations where PV-electrolytic H2 could substitute natural gas-derived H2 at avoided CO2 costs (%$120/ton) similar to the cost of deploying carbon capture and sequestration.

The Carbon2Chem project aims to convert exhaust gases from the steel industry into chemicals such as methanol to reduce CO2 emissions. Here H2 is required for the conversion of CO2 into methanol. Although much effort is put to produce H2 from renewables the use of fossil fuels especially natural gas seems to be fundamental in the short term. For this reason the development of clean technologies for the processing of natural gas with a low environmental impact has become a topic of utmost importance. In this context methane pyrolysis has received special attention to produce CO2-free H2.

By adding energy as hydrogen to the biomass-to-liquid (BtL) process several published studies have shown that carbon efficiency can be increased substantially. Hydrogen can be produced from renewable electrical energy through the electrolysis of water or steam. Adding high-temperature thermal energy to the gasifier will also increase the overall carbon efficiency. Here an economic criterion is applied to find the optimal distribution of adding electrical energy directly to the gasifier as opposed to the electrolysis unit. Three different technologies for electrolysis are applied: solid oxide steam electrolysis (SOEC) alkaline water electrolysis (AEL) and proton exchange membrane (PEM). It is shown that the addition of part of the renewable energy to the gasifier using electric heaters is always beneficial and that the electrolysis unit operating costs are a significant portion of the costs. With renewable electricity supplied at a cost of 50 USD/MWh and a capital cost of 1500 USD/kW installed SOEC the operating costs of electric heaters and SOEC account for more than 70% of the total costs. The energy efficiency of the electrolyzer is found to be more important than the capital cost. The optimal amount of energy added to the gasifier is about 37–39% of the energy in the biomass feed. A BtL process using renewable hydrogen imports at 2.5 USD/kg H2 or SOEC for hydrogen production at reduced electricity prices gives the best values for the economic objective.

Based on the Sustainable Development Goals outlined in the 2030 agenda of the United Nations affordable and clean energy is one of the most relevant goals to achieve the decarbonization targets and break down the global climate change effects. The use of renewable energy sources namely solar energy is gaining attention and market share due to reductions in investment costs. Nevertheless it is important to overcome the energy storage problems mostly in industrial applications. The integration of photovoltaic power plants with hydrogen production and its storage for further conversion to usable electricity are an interesting option from both the technical and economic points of view. The main objective of this study is to analyse the potential for green hydrogen production and storage through PV production based on technical data and operational considerations. We also present a conceptual model and the configuration of a PV power plant integrated with hydrogen production for industry supply. The proposed power plant configuration identifies different pathways to improve energy use: supply an industrial facility supply the hydrogen production and storage unit sell the energy surplus to the electrical grid and provide energy to a backup battery. One of the greatest challenges for the proposed model is the component sizing and water electrolysis process for hydrogen production due to the operational requirements and the technology costs.

Hydrogen which has a high energy density and does not emit pollutants is considered an alternative energy source to replace fossil fuels. Herein we report an experimental study on hydrogen leaks and ventilation methods for preventing damage caused by leaks from hydrogen fuel cell rooms in homes among various uses of hydrogen. This experiment was conducted in a temporary space with a volume of 11.484 m3 . The supplied pressure leak-hole size and leakage amount were adjusted as the experimental conditions. The resulting hydrogen concentrations which changed according to the operation of the ventilation openings ventilation fan and supplied shutoff valve were measured. The experimental results showed that the reductions in the hydrogen concentration due to the shutoff valve were the most significant. The maximum hydrogen concentration could be reduced by 80% or more if it is 100 times that of the leakage volume or higher. The shutoff valve ventilation fan and ventilation openings were required to reduce the concentrations of the fuel cell room hydrogen in a spatially uniform manner. Although the hydrogen concentration in a small hydrogen fuel cell room for home use can rapidly increase a rapid reduction in the concentration of hydrogen with an appropriate ventilation system has been experimentally proven.

Transformation concepts towards a low-carbon society often require new technology and infrastructure that evoke protests in the population. Therefore it is crucial to understand positions and conflicts in society to achieve social acceptance. This paper analyses these positions using the example of implementing hydrogen and carbon capture and storage infrastructure to decarbonise the German energy system. The empirical basis of the study are explorative stakeholder interviews which were conducted with experts from politics economics civil society and science and analysed within a discursive and attitudinal framework using qualitative content analysis. These stakeholder positions are assumed to represent dominant social perceptions and reflect chances and risks for acceptance. The results indicate different positions while pursuing the common goal of addressing climate change. The general conflict concerns strategies towards a low-carbon society especially the speed of phasing-out fossil energies. Regarding the combination of hydrogen and carbon capture and storage as instrument in the context of the energy transition the stakeholder interviews indicate controversial as well as consensual perceptions. The assessments range from rejection to deeming it absolutely necessary. Controversial argumentations refer to security of supply competitiveness and environmental protection. In contrast consensus can be reached by balancing ecological and economic arguments e.g. by linking hydrogen technologies with renewable and fossil energy sources or by limiting the use of carbon capture and storage only to certain applications (industry bioenergy). In further decisions this balancing of arguments combined with openness of technology transparency of information and citizen participation need to be considered to achieve broad acceptance.

With the imminent threat of the energy crises innovation in energy technologies is happening world-wide. The aim is to reduce our reliance on fossil fuels. Electric vehicles with fuel-cells that use hydrogen as an energy carrier are touted to be one of the most important potential replacements of the gasoline vehicle in both future transportation scenarios and emerging smart energy grids. However hydrogen storage is a major technical barrier that lies between where we are now and the mass application of hydrogen energy. Further exploration of onboard hydrogen storage systems (OHSS) is urgently needed and in this regard a comprehensive technology opportunity analysis will help. Hence with this research we drew on scientific papers and patents related to OHSS and developed a novel methodology for investigating the past present and future development trends in OHSS. Specifically we constructed a heterogeneous knowledge network using a unique multi-component structure with three core components: hydrogen carriers hydrogen storage materials and fuel cells. From this network we extracted both the developed and underdeveloped technological solutions in the field and applied a well-designed evaluation system and prediction model to score the future development potential of these technological solutions. What emerged was the most promising directions of research in the short medium and long term. The results show that our methodology can effectively identify technology opportunities in OHSS along with providing valuable decision support to researchers and enterprise managers associated with the development and application of OHSS.

The development of low-carbon fuels from renewable resources is a key measure to reduce carbon dioxide emissions and mitigate climate change. Biomass gasification with subsequent gas processing and purification is a promising route to produce low-carbon hydrogen. In the past decade simulation-based modelling using Aspen Plus software has supported the investigation of future potential industrial applications of this pathway. This article aims to provide a review of the modelling and economic assessment of woody biomass gasification-based hydrogen production with focus on the evaluation of the model accuracy in predicting producer gas composition in comparison with experimental data depending on the approach implemented. The assessment of comprehensive models which integrate biomass gasification with gas processing and purification highlights how downstream gas processing could improve the quality of the syngas and thus the hydrogen yield. The information in this article provides an overview of the current practices challenges and opportunities for future research particularly for the development of a comprehensive pathway for hydrogen production based on biomass gasification. Moreover this review includes a techno-economic assessment of biomass to hydrogen processes which will be useful for implementation at industrial-scale.

Hydrogen is often suggested as a universal fuel that can replace fossil fuels. This paper analyses the feasibility of direct hydrogen utilisation in all energy sectors in a 100% renewable energy system for Europe in 2050 using hour-by-hour energy system analysis. Our results show that using hydrogen for heating purposes has high costs and low energy efficiency. Hydrogen for electricity production is beneficial only in limited quantities to restrict biomass consumption but increases the system costs due to losses. The transport sector results show that hydrogen is an expensive alternative to liquid e-fuels and electrified transport due to high infrastructure costs and respectively low energy efficiency. The industry sector may benefit from hydrogen to reduce biomass at a lower cost than in the other energy sectors but electrification and e-methane may be more feasible. Seen from a systems perspective hydrogen will play a key role in future renewable energy systems but primarily as e-fuel feedstock rather than direct end-fuel in the hard-to-abate sectors.