Applications & Pathways
Split Injection Strategies for a High-pressure Hydrogen Direct Injection in a Small-bore Dual-fuel Diesel Engine
Jan 2024
Publication
Hydrogen-diesel dual direct-injection (H2DDI) engines present a promising pathway towards cleaner and more efficient transportation. In this study hydrogen split injection strategies were explored in an automotive-size single-cylinder compression ignition (CI) engine with a focus on varying the injection timings and energy fractions. The engine was operated at an intermediate load with fixed combustion phasing through adjustments of pilot diesel injection timing. An energy substitution principle guided the variation in energy fraction between the two hydrogen injections and then diesel injection while keeping the total energy input constant. The findings demonstrate that early first hydrogen injection timings lead to characteristics indicative of premixed combustion reflecting a high homogeneity of the hydrogen-air mixture. In contrast hydrogen stratification levels were predominantly influenced by later second injection timings with mixing-controlled combustion behaviour apparent for very late injections near top dead centre or when the second hydrogen injection held high energy fractions which led to decreased nitrogen oxides (NOx: NO and NO2) emissions. The carbon dioxide (CO2) emissions did not show high sensitivity to the hydrogen split injection strategies exhibiting about 77 % reduction compared to the diesel baseline due primarily to increased hydrogen energy fraction of up to 90 %
Effects of Hydrogen, Methane, and Their Blends on Rapid-Filling Process of High-Pressure Composite Tank
Feb 2024
Publication
Alternative fuels such as hydrogen compressed natural gas and liquefied natural gas are considered as feasible energy carriers. Selected positive factors from the EU climate and energy policy on achieving climate neutrality by 2050 highlighted the need for the gradual expansion of the infrastructure for alternative fuel. In this research continuity equations and the first and second laws of thermodynamics were used to develop a theoretical model to explore the impact of hydrogen and natural gas on both the filling process and the ultimate in-cylinder conditions of a type IV composite cylinder (20 MPa for CNG 35 MPa and 70 MPa for hydrogen). A composite tank was considered an adiabatic system. Within this study based on the GERG-2008 equation of state a thermodynamic model was developed to compare and determine the influence of (i) hydrogen and (ii) natural gas on the selected thermodynamic parameters during the fast-filling process. The obtained results show that the cylinder-filling time depending on the cylinder capacity is approximately 36–37% shorter for pure hydrogen compared to pure methane and the maximum energy stored in the storage tank for pure hydrogen is approximately 28% lower compared to methane whereas the total entropy generation for pure hydrogen is approximately 52% higher compared to pure methane.
Research of the Impact of Hydrogen Metallurgy Technology on the Reduction of the Chinese Steel Industry’s Carbon Dioxide Emissions
Feb 2024
Publication
The steel industry which relies heavily on primary energy is one of the industries with the highest CO2 emissions in China. It is urgent for the industry to identify ways to embark on the path to “green steel”. Hydrogen metallurgy technology uses hydrogen as a reducing agent and its use is an important way to reduce CO2 emissions from long-term steelmaking and ensure the green and sustainable development of the steel industry. Previous research has demonstrated the feasibility and emission reduction effects of hydrogen metallurgy technology; however further research is needed to dynamically analyze the overall impact of the large-scale development of hydrogen metallurgy technology on future CO2 emissions from the steel industry. This article selects the integrated MARKAL-EFOM system (TIMES) model as its analysis model constructs a China steel industry hydrogen metallurgy model (TIMES-CSHM) and analyzes the resulting impact of hydrogen metallurgy technology on CO2 emissions. The results indicate that in the business-as-usual scenario (BAU scenario) applying hydrogen metallurgy technology in the period from 2020 to 2050 is expected to reduce emissions by 203 million tons and make an average 39.85% contribution to reducing the steel industry’s CO2 emissions. In the carbon emission reduction scenario applying hydrogen metallurgy technology in the period from 2020 to 2050 is expected to reduce emissions by 353 million tons contributing an average of 41.32% to steel industry CO2 reduction. This study provides an assessment of how hydrogen metallurgy can reduce CO2 emissions in the steel industry and also provides a reference for the development of hydrogen metallurgy technology.
An Overview of Application-orientated Multifunctional Large-scale Stationary Battery and Hydrogen Hybrid Energy Storage System
Dec 2023
Publication
The imperative to address traditional energy crises and environmental concerns has accelerated the need for energy structure transformation. However the variable nature of renewable energy poses challenges in meeting complex practical energy requirements. To address this issue the construction of a multifunctional large-scale stationary energy storage system is considered an effective solution. This paper critically examines the battery and hydrogen hybrid energy storage systems. Both technologies face limitations hindering them from fully meeting future energy storage needs such as large storage capacity in limited space frequent storage with rapid response and continuous storage without loss. Batteries with their rapid response (90%) excel in frequent short-duration energy storage. However limitations such as a selfdischarge rate (>1%) and capacity loss (~20%) restrict their use for long-duration energy storage. Hydrogen as a potential energy carrier is suitable for large-scale long-duration energy storage due to its high energy density steady state and low loss. Nevertheless it is less efficient for frequent energy storage due to its low storage efficiency (~50%). Ongoing research suggests that a battery and hydrogen hybrid energy storage system could combine the strengths of both technologies to meet the growing demand for large-scale long-duration energy storage. To assess their applied potentials this paper provides a detailed analysis of the research status of both energy storage technologies using proposed key performance indices. Additionally application-oriented future directions and challenges of the battery and hydrogen hybrid energy storage system are outlined from multiple perspectives offering guidance for the development of advanced energy storage systems.
Research on Energy Management of Hydrogen Fuel Cell Bus Based on Deep Reinforcement Learning Considering Velocity Control
Aug 2023
Publication
In the vehicle-to-everything scenario the fuel cell bus can accurately obtain the surrounding traffic information and quickly optimize the energy management problem while controlling its own safe and efficient driving. This paper proposes an energy management strategy (EMS) that considers speed control based on deep reinforcement learning (DRL) in complex traffic scenarios. Using SUMO simulation software (Version 1.15.0) a two-lane urban expressway is designed as a traffic scenario and a hydrogen fuel cell bus speed control and energy management system is designed through the soft actor–critic (SAC) algorithm to effectively reduce the equivalent hydrogen consumption and fuel cell output power fluctuation while ensuring the safe efficient and smooth driving of the vehicle. Compared with the SUMO–IDM car-following model the average speed of vehicles is kept the same and the average acceleration and acceleration change value decrease by 10.22% and 11.57% respectively. Compared with deep deterministic policy gradient (DDPG) the average speed is increased by 1.18% and the average acceleration and acceleration change value are decreased by 4.82% and 5.31% respectively. In terms of energy management the hydrogen consumption of SAC–OPT-based energy management strategy reaches 95.52% of that of the DP algorithm and the fluctuation range is reduced by 32.65%. Compared with SAC strategy the fluctuation amplitude is reduced by 15.29% which effectively improves the durability of fuel cells.
Potential-risk and No-regret Options for Urban Energy System Design - A Sensitivity Analysis
Jan 2024
Publication
This study identifies supply options for sustainable urban energy systems which are robust to external system changes. A multi-criteria optimization model is used to minimize greenhouse gas (GHG) emissions and financial costs of a reference system. Sensitivity analyses examine the impact of changing boundary conditions related to GHG emissions energy prices energy demands and population density. Options that align with both financial and emission reduction and are robust to system changes are called “no-regret” options. Options sensitive to system changes are labeled as “potential-risk” options.<br/>There is a conflict between minimizing GHG emissions and financial costs. In the reference case the emission-optimized scenario enables a reduction of GHG emissions (-93%) but involves higher costs (+160%) compared to the financially-optimized scenario.<br/>No-regret options include photovoltaic systems decentralized heat pumps thermal storages electricity exchange between sub-systems and with higher-level systems and reducing energy demands through building insulation behavioral changes or the decrease of living space per inhabitant. Potential-risk options include solar thermal systems natural gas technologies high-capacity battery storages and hydrogen for buildiing energy supply.<br/>When energy prices rise financially-optimized systems approach the least-emission system design. The maximum profitability of natural gas technologies was already reached before the 2022 European energy crisis.
Two-Layer Optimization Planning Model for Integrated Energy Systems in Hydrogen Refueling Original Station
May 2023
Publication
With the aggravation of global environmental pollution problems and the need for energy restructuring hydrogen energy as a highly clean resource has gradually become a hot spot for research in countries around the world. Facing the requirement of distributed hydrogen in refueling the original station for hydrogen transportation and other usage this paper proposes a comprehensive energy system planning model for hydrogen refueling stations to obtain the necessary devices construction the devices’ capacity decisions and the optimal operation behaviors of each device. Comparing to traditional single hydrogen producing technics in the traditional planning model the proposed model in this paper integrates both water-electrolysis-based and methanol-based manufacturing technics. A two-level optimization model is designed for this comprehensive system. The result of the numerical study shows that the proposed model can achieve a better optimal solution for distributed hydrogen production. Also it considers the single producing situation when price of one primary resource is sufficient higher than the other.
Toward Sustainability: An Overview of the Use of Green Hydrogen in the Agriculture and Livestock Sector
Aug 2023
Publication
The agro-livestock sector produces about one third of global greenhouse gas (GHG) emissions. Since more energy is needed to meet the growing demand for food and the industrial revolution in agriculture renewable energy sources could improve access to energy resources and energy security reduce dependence on fossil fuels and reduce GHG emissions. Hydrogen production is a promising energy technology but its deployment in the global energy system is lagging. Here we analyzed the theoretical and practical application of green hydrogen generated by electrolysis of water powered by renewable energy sources in the agro-livestock sector. Green hydrogen is at an early stage of development in most applications and barriers to its large-scale deployment remain. Appropriate policies and financial incentives could make it a profitable technology for the future.
Electrochemical Devices to Power a Sustainable Energy Transition—An Overview of Green Hydrogen Contribution
Mar 2024
Publication
This work discusses the current scenario and future growth of electrochemical energy devices such as water electrolyzers and fuel cells. It is based on the pivotal role that hydrogen can play as an energy carrier to replace fossil fuels. Moreover it is envisaged that the scaled-up and broader deployment of the technologies can hold the potential to address the challenges associated with intermittent renewable energy generation. From a sustainability perspective this synergy between hydrogen and electricity from renewable sources is particularly attractive: electrolyzers convert the excess energy from renewables into green hydrogen and fuel cells use this hydrogen to convert it back into electricity when it is needed. Although this transition endorses the ambitious goal to supply greener energy for all it also entails increased demand for the materials that are essential for developing such cleaner energy technologies. Herein several economic and environmental issues are highlighted besides a critical overview regarding each technology. The aim is to raise awareness and provide the reader (a non-specialist in the field) with useful resources regarding the challenges that need to be overcome so that a green hydrogen energy transition and a better life can be fully achieved.
Look-ahead Scheduling of Energy-Water Nexus Integrated with Power2X Conversion Technologies under Multiple Uncertainties
Aug 2023
Publication
Co-optimizing energy and water resources in a microgrid can increase efficiency and improve economic performance. Energy-water storage (EWS) devices are crucial components of a high-efficient energy-water microgrid (EWMG). The state of charge (SoC) at the end of the first day of operation is one of the most significant variables in EWS devices since it is used as a parameter to indicate the starting SoC for the second day which influences the operating cost for the second day. Hence this paper examines the benefits and applicability of a lookahead optimization strategy for an EWMG integrated with multi-type energy conversion technologies and multienergy demand response to supply various energy-water demands related to electric/hydrogen vehicles and commercial/residential buildings with the lowest cost for two consecutive days. In addition a hybrid info-gap/robust optimization technique is applied to cover uncertainties in photovoltaic power and electricity prices as a tri-level optimization framework without generating scenarios and using the probability distribution functions. Duality theory is also used to convert the problem into a single-level MILP so that it can be solved by CPLEX. According to the findings the implemented energy-water storage systems and look-ahead strategy accounted for respectively 4.03% and 0.43% reduction in the total cost.
A Novel Layout for Combined Heat and Power Production for a Hospital Based on a Solid Oxide Fuel Cell
Feb 2024
Publication
This paper addresses the problem of the reduction in the huge energy demand of hospitals and health care facilities. The sharp increase in the natural gas price due to the Ukrainian–Russian war has significantly reduced economic savings achieved by combined heat and power (CHP) units especially for hospitals. In this framework this research proposes a novel system based on the integration of a reversible CHP solid oxide fuel cell (SOFC) and a photovoltaic field (PV). The PV power is mainly used for balancing the hospital load. The excess power production is exploited to produce renewable hydrogen. The SOFC operates in electrical tracking mode. The cogenerative heat produced by the SOFC is exploited to partially meet the thermal load of the hospital. The SOFC is driven by the renewable hydrogen produced by the plant. When this hydrogen is not available the SOFC is driven by natural gas. In fact the SOFC is coupled with an external reformer. The simulation model of the whole plant including the reversible SOFC PV and hospital is developed in the TRNSYS18 environment and MATLAB. The model of the hospital is calibrated by means of measured data. The proposed system achieves very interesting results with a primary energy-saving index of 33% and a payback period of 6.7 years. Therefore this energy measure results in a promising solution for reducing the environmental impact of hospital and health care facilities.
Climate Change Mitigation Potentials of on Grid-connected Power-to-X Fuels and Advanced Biofuels for the European Maritime Transport
Jul 2023
Publication
This study proposes a country-based life-cycle assessment (LCA) of several conversion pathways related 10 to both on grid-connected Power-to-X (PtX) fuels and advanced biofuel production for maritime transport 11 in Europe. We estimate the biomass resource availability (both agricultural and forest residues and 12 second-generation energy crops from abandoned cropland) electricity mix and a future-oriented 13 prospective LCA to assess how future climate change mitigation policies influence the results. Our results 14 indicate that the potential of PtX fuels to achieve well-to-wake greenhouse gas intensities lower than 15 those of fossil fuels is limited to countries with a carbon intensity of the electricity mix below 100 gCO2eq kWh-1 16 . The more ambitious FuelEU Maritime goal could be achieved with PtX only if connected to electricity sources below ca. 17 gCO2eq kWh-1 17 which can become possible for most of the national 18 electricity mix in Europe by 2050 if renewable energy sources will become deployed at large scales. For 19 drop-in and hydrogen-based biofuels biomass residues have a higher potential to reduce emissions than 20 dedicated energy crops. In Europe the potentials of energy supply from all renewable and low-carbon 21 fuels (RLFs) range from 32-149% of the current annual fuel consumption in European maritime transport. 22 The full deployment of RLFs with carbon capture and storage technologies could mitigate up to 184% of 23 the current well-to-wake shipping emissions in Europe. Overall our study highlights how the strategic use 24 of both hydrogen-based biofuels and PtX fuels can contribute to the climate mitigation targetsfor present 25 and future scenarios of European maritime transport.
Review of Fuel Cell Technologies and Applications for Sustainable Microgrid Systems
Aug 2020
Publication
The shift from centralized to distributed generation and the need to address energy shortage and achieve the sustainability goals are among the important factors that drive increasing interests of governments planners and other relevant stakeholders in microgrid systems. Apart from the distributed renewable energy resources fuel cells (FCs) are a clean pollution-free highly efficient flexible and promising energy resource for microgrid applications that need more attention in research and development terms. Furthermore they can offer continuous operation and do not require recharging. This paper examines the exciting potential of FCs and their utilization in microgrid systems. It presents a comprehensive review of FCs with emphasis on the developmental status of the different technologies comparison of operational characteristics and the prevailing techno-economic barriers to their progress and the future outlook. Furthermore particular attention is paid to the applications of the FC technologies in microgrid systems such as grid-integrated grid-parallel stand-alone backup or emergency power and direct current systems including the FC control mechanisms and hybrid designs and the technical challenges faced when employing FCs in microgrids based on recent developments. Microgrids can help to strengthen the existing power grid and are also suitable for mitigating the problem of energy poverty in remote locations. The paper is expected to provide useful insights into advancing research and developments in clean energy generation through microgrid systems based on FCs.
Caveats of Green Hydrogen for Decarbonisation of Heating in Buildings
Oct 2023
Publication
Hydrogen (H2) has rapidly become a topic of great attention when discussing routes to net-zero carbon emissions. About 14% of CO2 emissions globally are directly associated with domestic heating in buildings. Replacing natural gas (NG) with H2 for heating has been highlighted as a rapid alternative for mitigating these emissions. To realise this not only the production challenges but also potential obstacles in the transmission/distribution and combustion of H2 must be technically identified and discussed. This review in addition to delineating the challenges of H2 in NG grid pipelines and H2 combustion also collates the results of the state-of-the-art technologies in H2-based heating systems. We conclude that the sustainability of water and renewable electricity resources strongly depends on sizing siting service life of electrolysis plants and post-electrolysis water disposal plans. 100% H2 in pipelines requires major infrastructure upgrades including production transmission pressurereduction stations distribution and boiler rooms. H2 leakage instigates more environmental risks than economic ones. With optimised boilers burning H2 could reduce GHG emissions and obtain an appropriate heating efficiency; more data from boiler manufacturers must be provided. Overall green H2 is not the only solution to decarbonise heating in buildings and it should be pursued abreast of other heating technologies.
Can an Energy Only Market Enable Resource Adequacy in a Decarbonized Power System? A Co-simulation with Two Agent-based-models
Feb 2024
Publication
Future power systems in which generation will come almost entirely from variable Renewable Energy Sources (vRES) will be characterized by weather-driven supply and flexible demand. In a simulation of the future Dutch power system we analyze whether there are sufficient incentives for market-driven investors to provide a sufficient level of security of supply considering the profit-seeking and myopic behavior of investors. We cosimulate two agent-based models (ABM) one for generation expansion and one for the operational time scale. The results suggest that in a system with a high share of vRES and flexibility prices will be set predominantly by the demand’s willingness to pay particularly by the opportunity cost of flexible hydrogen electrolyzers. The demand for electric heating could double the price of electricity in winter compared to summer and in years with low vRES could cause shortages. Simulations with stochastic weather profiles increase the year-to-year variability of cost recovery by more than threefold and the year-to-year price variability by more than tenfold compared to a scenario with no weather uncertainty. Dispatchable technologies have the most volatile annual returns due to high scarcity rents during years of low vRES production and diminished returns during years with high vRES production. We conclude that in a highly renewable EOM investors would not have sufficient incentives to ensure the reliability of the system. If they invested in such a way to ensure that demand could be met in a year with the lowest vRES yield they would not recover their fixed costs in the majority of years.
Routes for Hydrogen Introduction in the Industrial Hard-to-Abate Sectors for Promoting Energy Transition
Aug 2023
Publication
This paper offers a set of comprehensive guidelines aimed at facilitating the widespread adoption of hydrogen in the industrial hard-to-abate sectors. The authors begin by conducting a detailed analysis of these sectors providing an overview of their unique characteristics and challenges. This paper delves into specific elements related to hydrogen technologies shedding light on their potential applications and discussing feasible implementation strategies. By exploring the strengths and limitations of each technology this paper offers valuable insights into its suitability for specific applications. Finally through a specific analysis focused on the steel sector the authors provide in-depth information on the potential benefits and challenges associated with hydrogen adoption in this context. By emphasizing the steel sector as a focal point the authors contribute to a more nuanced understanding of hydrogen’s role in decarbonizing industrial processes and inspire further exploration of its applications in other challenging sectors.
A Review on the Research Progress and Application of Compressed Hydrogen in the Marine Hydrogen Fuel Cell Power System
Jan 2024
Publication
The urgency to mitigate greenhouse gas emissions from maritime vessels has intensified due to the increasingly stringent directives set forth by the International Maritime Organization (IMO). These directives specifically address energy efficiency enhancements and emissions reduction within the shipping industry. In this context hydrogen is the much sought after fuel for all the global economies and its applications for transportation and propulsion in particular is crucial for cutting down carbon emissions. Nevertheless the realization of hydrogen-powered vessels is confronted by substantial technical hurdles that necessitate thorough examination. This study undertakes a comprehensive analysis encompassing diverse facets including distinct variations of hydrogen fuel cells hydrogen internal combustion engines safety protocols associated with energy storage as well as the array of policies and commercialization endeavors undertaken globally for the advancement of hydrogen-propelled ships. By amalgamating insights from these multifaceted dimensions this paper adeptly encapsulates the myriad challenges intrinsic to the evolution of hydrogen-fueled maritime vessels while concurrently casting a forward-looking gaze on their prospective trajectory.
A Technology Review of Decarbonization: Efficient Techniques for Producing Hydrogen as Fuel
Aug 2023
Publication
Climate change is obvious in many ways. The weather changes rapidly from day to day reaching high temperatures such as 28 ◦C one day and heavy rain the next with temperatures below 18 ◦C. There are also very strong storms caused by this phenomenon. The way the environment acts is different than the current epoch would predict indicating a long-term shift in weather and temperature patterns. The mean temperature of earth is rising due to the greenhouse effect that is caused by human activity and mostly by the burning of fossil fuel emitting CO2 and other pollutant gasses. Nowadays every country is trying to lower CO2 emissions from everyday human activities a movement called “decarbonization”. Since the 18th century there has been a great deal of research carried out on possible alternatives to fossil fuels. Some of the work was just to discover ways to power heaters or automotive vehicle but there is a great deal of work remaining to complete regarding this issue after discovering the greenhouse effect and its impact on the planet’s climate in order to eliminate it by using fuel whose combustion emissions are more environmentally friendly. In the present work many discoveries will be presented that use hydrogen (H2 ) or hydroxy (H-OH) as fuel. The main reason for this is the emission of pure water after combustion but the most interesting part is the approach every scientist uses to create the fuel gas from water.
Enhancing Safety through Optimal Placement of Components in Hydrogen Tractor: Rollover Angle Analysis
Feb 2024
Publication
Hydrogen tractors are being developed necessitating consideration of the variation in the center of gravity depending on the arrangement of components such as power packs and cooling modules that replace traditional engines. This study analyzes the effects of component arrangement on stability and rollover angle in hydrogen tractors through simulations and proposes an optimal configuration. Stability is evaluated by analyzing rollover angles in various directions with rotations around the tractor’s midpoint. Based on the analysis of rollover angles for Type 1 Type 2 and Type 3 hydrogen tractors Type 2 demonstrates superior stability compared to the other types. Specifically when comparing lateral rollover angles at 0◦ rotation Type 2 exhibits a 2% increase over Type 3. Upon rotations at 90◦ and 180◦ Type 2 consistently displays the highest rollover angles with differences ranging from approximately 6% to 12% compared to the other types. These results indicate that Type 2 with its specific component arrangement offers the most stable configuration among the three types of tractors. It is confirmed that the rollover angle changes based on component arrangement with a lower center of gravity resulting in greater stability. These findings serve as a crucial foundation for enhancing stability in the future design and manufacturing phases of hydrogen tractors.
Evaluation of Significant Greenhouse Gas Emissions Reduction Using Hydrogen Fuel in a LFG/Diesel RCCI Engine
Jan 2024
Publication
The production of solid waste in human societies and the related environmental and global warming concerns are increasing. Extensive use of existing conventional diesel and dual-fuel engines also causes the production of high levels of greenhouse gases and aggravating the aforementioned concerns. Therefore the aim of this study is to reduce the greenhouse emissions in existing natural gas/diesel dual-fuel heavy-duty diesel engine. For this purpose changing the type of combustion to reactivity-controlled compression-ignition combustion and using landfill gas instead of natural gas in a dual-fuel engine were simultaneously implemented. Moreover a traditional method was used to evaluate the effect of variations in three important parameters on the engine's performance in order to determine the appropriate engine operating ranges. The simulation results indicate that although the consumption of 102000 cubic meters per year of natural gas in each cylinder is reduced only by replacing landfill gas the level of engine greenhouse gas emissions is too high compared to the relevant levels of emissions standards. Hence by keeping the total energy content of the fuels constant landfill gas enrichment with hydrogen was considered to reduce the engine emissions. The simulation results show that by increasing the hydrogen energy share up to 37% the engine load has the potential to be improved up to 7% without any exposure to diesel knock. However the downfall is the reduction in the gross indicated efficiency up to 3%. Meanwhile not only the fifth level of the European emission standard for nitrogen oxides and the sixth level of this standard for carbon monoxide can be achieved but it is also possible to overcome the high level of unburned methane as a drastic greenhouse gas and formaldehyde as a related carcinogenic species.
No more items...