China, People’s Republic

Traditional charging stations have a single function which usually does not consider the construction of energy storage facilities and it is difficult to promote the consumption of new energy. With the gradual increase in the number of new energy vehicles (NEVs) to give full play to the complementary advantages of source-load resources and provide safe efficient and economical energy supply services this paper proposes the optimal operation strategy of a PV-charging-hydrogenation composite energy station (CES) that considers demand response (DR). Firstly the operation mode of the CES is analyzed and the CES model including a photovoltaic power generation system fuel cell hydrogen production hydrogen storage hydrogenation and charging is established. The purpose is to provide energy supply services for electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs) at the same time. Secondly according to the travel law of EVs and HFCVs the distribution of charging demand and hydrogenation demand at different periods of the day is simulated by the Monte Carlo method. On this basis the following two demand response models are established: charging load demand response based on the price elasticity matrix and interruptible load demand response based on incentives. Finally a multi-objective optimal operation model considering DR is proposed to minimize the comprehensive operating cost and load fluctuation of CES and the maximum–minimum method and analytic hierarchy process (AHP) are used to transform this into a linearly weighted single-objective function which is solved via an improved moth–flame optimization algorithm (IMFO). Through the simulation examples operation results in four different scenarios are obtained. Compared with a situation not considering DR the operation strategy proposed in this paper can reduce the comprehensive operation cost of CES by CNY 1051.5 and reduce the load fluctuation by 17.8% which verifies the effectiveness of the proposed model. In addition the impact of solar radiation and energy recharge demand changes on operations was also studied and the resulting data show that CES operations were more sensitive to energy recharge demand changes.

Aiming to solve the problems of insufficient dynamic responses the large loss of energy storage life of a single power cell and the large fluctuation in DC (direct current) bus voltage in fuel cell vessels this study takes a certain type of fuel cell ferry as the research object and proposes an improved equivalent minimum hydrogen consumption energy management strategy based on fuzzy logic control. First a hybrid power system including a fuel cell a lithium–iron–phosphate battery and a supercapacitor is proposed with the simulation of the power system of the modified mother ship. Second a power system simulation model and a double-closed-loop PI (proportion integration) control model are established in MATLAB/Simulink to design the equivalent hydrogen consumption model and fuzzy logic control strategy. The simulation results show that under the premise of meeting the load requirements the control strategy designed in this paper improves the Li-ion battery’s power the Li-ion battery’s SOC (state of charge) the bus voltage stability and the equivalent hydrogen consumption significantly compared with those before optimization which improves the stability and economy of the power system and has certain practical engineering value.

In order to achieve the ambitious goal of “carbon neutrality” countries around the world are striving to develop clean energy. Against this background this paper takes China and Italy as representatives of developing and developed countries to summarize the energy structure composition and development overview of the two countries. The paper analyzes the serious challenges facing the future energy development of both countries and investigates the possibilities of energy cooperation between the two countries taking into account their respective advantages in energy development. By comparing the policies issued by the two governments to encourage clean energy development this paper analyzes the severe challenges faced by the two countries’ energy development in the future and combines their respective energy development advantages to look forward to the possibility of energy cooperation between the two countries in the future. This lays the foundation for China and Italy to build an “Energy Road” after the “Silk Road”.

With the adjustment of energy structure the utilization of hydrogen energy has been widely attended. China’s carbon neutrality targets make it urgent to change traditional coal-fired power generation. The paper investigates the combustion of pulverized coal blended with hydrogen to reduce carbon emissions. In terms of calorific value the pulverized coal combustion with hydrogen at 1% 5% and 10% blending ratios is investigated. The results show that there is a significant reduction in CO2 concentration after hydrogen blending. The CO2 concentration (mole fraction) decreased from 15.6% to 13.6% for the 10% hydrogen blending condition compared to the non-hydrogen blending condition. The rapid combustion of hydrogen produces large amounts of heat in a short period which helps the ignition of pulverized coal. However as the proportion of hydrogen blending increases the production of large amounts of H2O gives an overall lower temperature. On the other hand the temperature distribution is more uniform. The concentrations of O2 and CO in the upper part of the furnace increased. The current air distribution pattern cannot satisfy the adequate combustion of the fuel after hydrogen blending.

At present most fuel cell engines are single-stack systems and high-power single-stack systems have bottlenecks in meeting the power requirements of heavy-duty trucks mainly because the increase in the single active area and the excessive number of cells will lead to poor distribution uniformity of water gas and heat in the stack which will cause local attenuation and reduce the performance of the stack. This paper introduces the design concept of internal combustion engine takes three-stack fuel cell engine as an example designs multi-stack fuel cell system scheme and serialized high-voltage scheme. Through Intelligent control technology of independent hydrogen injection based on multi-stack coupling the hydrogen injection inflow of each stack is controlled online according to the real-time anode pressure to achieve accurate fuel injection of a single stack and ensure the consistency between multiple stacks. proves the performance advantage of multi-stack fuel cell engine through theoretical designintelligent control and test verification and focuses on analyzing the key technical problems that may exist in multi-stack consistency. The research results provide a reference for the design of multi-stack fuel cell engines and have important reference value for the powertrain design of long-distance heavy-duty and high-power fuel cell trucks.

To improve the recovery of waste heat and avoid the problem of abandoning wind and solar energy a multi-energy complementary distributed energy system (MECDES) is proposed integrating waste heat and surplus electricity for hydrogen storage. The system comprises a combined cooling heating and power (CCHP) system with a gas engine (GE) solar and wind power generation and miniaturized natural gas hydrogen production equipment (MNGHPE). In this novel system the GE’s waste heat is recycled as water vapor for hydrogen production in the waste heat boiler while surplus electricity from renewable sources powers the MNGHPE. A mathematical model was developed to simulate hydrogen production in three building types: offices hotels and hospitals. Simulation results demonstrate the system’s ability to store waste heat and surplus electricity as hydrogen thereby providing economic benefit energy savings and carbon reduction. Compared with traditional energy supply methods the integrated system achieves maximum energy savings and carbon emission reduction in office buildings with an annual primary energy reduction rate of 49.42–85.10% and an annual carbon emission reduction rate of 34.88–47.00%. The hydrogen production’s profit rate is approximately 70%. If the produced hydrogen is supplied to building through a hydrogen fuel cell the primary energy reduction rate is further decreased by 2.86–3.04% and the carbon emission reduction rate is further decreased by 12.67–14.26%. This research solves the problem of waste heat and surplus energy in MECDESs by the method of hydrogen storage and system integration. The economic benefits energy savings and carbon reduction effects of different building types and different energy allocation scenarios were compared as well as the profitability of hydrogen production and the factors affecting it. This has a positive technical guidance role for the practical application of MECDESs.

Hydrogen energy represents a crucial pathway towards achieving carbon neutrality and is a pivotal facet of future strategic emerging industries. The safe and efficient transportation of hydrogen is a key link in the entire chain development of the hydrogen energy industry’s “production storage and transportation”. Mixing hydrogen into natural gas pipelines for transportation is the potential best way to achieve large-scale long-distance safe and efficient hydrogen transportation. Welds are identified as the vulnerable points in natural gas pipelines and compatibility between hydrogen-doped natural gas and existing pipeline welds is a critical technical challenge that affects the global-scale transportation of hydrogen energy. Therefore this article systematically discusses the construction and weld characteristics of hydrogen-doped natural gas pipelines the research status of hydrogen damage mechanism and mechanical property strengthening methods of hydrogen-doped natural gas pipeline welds and points out the future development direction of hydrogen damage mechanism research in hydrogen-doped natural gas pipeline welds. The research results show that: 1 Currently there is a need for comprehensive research on the degradation of mechanical properties in welds made from typical pipe materials on a global scale. It is imperative to systematically elucidate the mechanism of mechanical property degradation due to conventional and hydrogeninduced damage in welds of high-pressure hydrogen-doped natural gas pipelines worldwide. 2 The deterioration of mechanical properties in welds of hydrogen-doped natural gas pipelines is influenced by various components including hydrogen carbon dioxide and nitrogen. It is necessary to reveal the mechanism of mechanical property deterioration of pipeline welds under the joint participation of multiple damage mechanisms under multi-component gas conditions. 3 Establishing a fundamental database of mechanical properties for typical pipeline steel materials under hydrogen-doped natural gas conditions globally is imperative to form a method for strengthening the mechanical properties of typical high-pressure hydrogen-doped natural gas pipeline welds. 4 It is essential to promptly develop relevant standards for hydrogen blending transportation welding technology as well as weld evaluation testing and repair procedures for natural gas pipelines.

Increasingly stringent emission standards have led shippers and port operators to consider alternative energy sources which can reduce emissions while minimizing capital investment. It is essential to understand whether there is a certain economic investment gap for alternative energy. The present work mainly focuses on the simulation study of ships using ammonia and hydrogen fuels arriving at Guangzhou Port to investigate the emission advantages and cost-benefit analysis of ammonia and hydrogen as alternative fuels. By collecting actual data and fuel consumption emissions of ships arriving at Guangzhou Port the present study calculated the pollutant emissions and cost of ammonia and hydrogen fuels substitution. As expected it is shown that with the increase of NH3 in fuel mixed fuels will effectively reduce CO and CO2 emissions. Compared to conventional fuel the injection of NH3 increases the NOx emission. However the cost savings of ammonia fuel for CO2 SOx and PM10 reduction are higher than that for NOx. In terms of pollutants ammonia is less expensive than conventional fuels when applied to the Guangzhou Port. However the cost of fuel supply is still higher than conventional energy as ammonia has not yet formed a complete fuel supply and storage system for ships. On the other hand hydrogen is quite expensive to store and transport resulting in higher overall costs than ammonia and conventional fuels even if no pollutants are produced. At present conventional fuels still have advantage in terms of cost. With the promotion of ammonia fuel technology and application the cost of supply will be reduced. It is predicted that by 2035 ammonia will not only have emission reduction benefits but also will have a lower overall economic cost than conventional fuels. Hydrogen energy will need longer development and technological breakthroughs due to the limitation of storage conditions.

The research motivation of this paper is to utilize the large amount of energy wasted during the LNG (liquefied natural gas) gasification process and proposes a synergistic liquefied hydrogen (LH2) production and storage process scheme for LNG receiving station and methane reforming hydrogen production process - SMR-LNG combined liquefied hydrogen production system which uses the cold energy from LNG to pre-cool the hydrogen and subsequently uses an expander to complete the liquefaction of hydrogen. The proposed process is modeled and simulated by Aspen HYSYS software and its efficiency is evaluated and sensitivity analysis is carried out. The simulation results show that the system can produce liquefied hydrogen with a flow rate of 5.89t/h with 99.99% purity when the LNG supply rate is 50t/h. The power consumption of liquefied hydrogen is 46.6kWh/kg LH2; meanwhile the energy consumption of the HL subsystem is 15.9kWh/kg LH2 lower than traditional value of 17~19kWh/kg LH2. The efficiency of the hydrogen production subsystem was 16.9%; the efficiency of the hydrogen liquefaction (HL) subsystem was 29.61% which was significantly higher than the conventional industrial value of 21%; the overall energy efficiency (EE1) of the system was 56.52% with the exergy efficiency (EE2) of 22.2% reflecting a relatively good thermodynamic perfection. The energy consumption of liquefied hydrogen per unit product is 98.71 GJ/kg LH2.

Currently the issue of creating decarbonized energy systems in various spheres of life is acute. Therefore for gas turbine power systems including hybrid power plants with fuel cells it is relevant to transfer the existing engines to pure hydrogen or mixtures of hydrogen with natural gas. However significant problems arise associated with the possibility of the appearance of flashback zones and acoustic instability of combustion an increase in the temperature of the walls of the flame tubes and an increase in the emission of nitrogen oxides in some cases. This work is devoted to improving the efficiency of gas turbine power systems by combusting pure hydrogen and mixtures of natural gas with hydrogen. The organization of working processes in the premixed combustion chamber and the combustion chamber with a sequential injection of ecological and energy steam for the “Aquarius” type power plant is considered. The conducted studies of the basic aerodynamic and energy parameters of a gas turbine combustor working on hydrogen-containing gases are based on solving the equations of conservation and transfer in a multicomponent reacting system. A four-stage chemical scheme for the burning of a mixture of natural gas and hydrogen was used which allows for the rational parameters of environmentally friendly fuel burning devices to be calculated. The premixed combustion chamber can only be recommended for operations on mixtures of natural gas with hydrogen with a hydrogen content not exceeding 20% (by volume). An increase in the content of hydrogen leads to the appearance of flashback zones and fuel combustion inside the channels of the swirlers. For the combustion chamber of the combined-cycle power plant “Vodoley” when operating on pure hydrogen the formation of flame flashback zones does not occur.