United Kingdom

Electrical power generation is changing dramatically across the world because of the need to reduce greenhouse gas emissions and to introduce mixed energy sources. The power network faces great challenges in transmission and distribution to meet demand with unpredictable daily and seasonal variations. Electrical Energy Storage (EES) is recognized as underpinning technologies to have great potential in meeting these challenges whereby energy is stored in a certain state according to the technology used and is converted to electrical energy when needed. However the wide variety of options and complex characteristic matrices make it difficult to appraise a specific EES technology for a particular application. This paper intends to mitigate this problem by providing a comprehensive and clear picture of the state-of-the-art technologies available and where they would be suited for integration into a power generation and distribution system. The paper starts with an overview of the operation principles technical and economic performance features and the current research and development of important EES technologies sorted into six main categories based on the types of energy stored. Following this a comprehensive comparison and an application potential analysis of the reviewed technologies are presented.

Water electrolysis supplied by renewable energy is the foremost technology for producing ‘‘green” hydrogen for fuel cell vehicles. In addition the ability to rapidly follow an intermittent load makes electrolysis an ideal solution for grid-balancing caused by differences in supply and demand for energy generation and consumption. Membrane-electrode assemblies (MEAs) designed for polymer electrolyte membrane (PEM) water electrolysis based on a novel short-side chain (SSC) perfluorosulfonic acid (PFSA) membrane Aquivion with various cathode and anode noble metal loadings were investigated in terms of both performance and durability. Utilizing a nanosized Ir_0.7Ru_0.3O solid solution anode catalyst and a supported Pt/C cathode catalyst in combination with the Aquivion membrane gave excellent electrolysis performances exceeding 3.2 A cm^-2 at 1.8 V terminal cell voltage ( 80% efficiency) at 90 ºC in the presence of a total catalyst loading of 1.6 mg cm⁻². A very small loss of efficiency corresponding to 30 mV voltage increase was recorded at 3 A cm 2 using a total noble metal catalyst loading of less than 0.5 mg cm⁻² (compared to the industry standard of 2 mg cm⁻²). Steady-state durability tests carried out for 1000 h at 1 A cm ^-2 showed excellent stability for the MEA with total noble metal catalyst loading of 1.6 mg cm⁻² (cell voltage increase  5 lV/h). Moderate degradation rate (cell voltage increase 15 lV/h) was recorded for the low loading 0.5 mg cm^-2 MEA. Similar stability characteristics were observed in durability tests at 3 A cm⁻². These high performance and stability characteristics were attributed to the enhanced proton conductivity and good stability of the novel membrane the optimized structural properties of the the enhanced proton conductivity and good stability of the novel membrane the optimized structural properties of the the enhanced proton conductivity and good stability of the novel membrane the optimized structural properties of the Ir and Ru oxide solid solution and the enrichment of Ir species on the surface for the anodic catalyst.

This research considers the potential role of hydrogen in meeting the UK’s carbon budgets. It was written by consultancy E4tech.<br/>The CCC develops scenarios for the UK’s future energy system to assess routes to decarbonisation and to advise UK Government on policy options. Uncertainty to 2050 is considerable and so different scenarios are needed to assess different trajectories targets and technology combinations. Some of these scenarios assess specific technologies or fuels which have the potential to make a significant contribution to future decarbonisation.<br/>Hydrogen is one such fuel. It has been included in limited quantities in some CCC scenarios but not extensively examined in part due to perceived or anticipated higher costs than some other options. But as hydrogen technology is developed and deployed the cost projections and other performance indicators have become more favourable.

Heating and hot water for UK buildings make up 40% of our energy consumption and 20% of our greenhouse gas emissions. It will be necessary to largely eliminate these emissions by around 2050 to meet the targets in the Climate Change Act and to maintain the UK contribution to international action under the Paris Agreement.<br/>Progress to date has stalled. The Government needs a credible new strategy and a much stronger policy framework for buildings decarbonisation over the next three decades. Many of the changes that will reduce emissions will also contribute toward modern affordable comfortable homes and workplaces and can be delivered alongside a major expansion in the number of homes. This report considers that challenge and sets out possible steps to meet it.

Energy used for heat accounts (in terms of final consumption) for approximately 45% of our total energy needs and is critical for families to heat their homes on winter days. Decarbonising heat while still meeting peak winter heating demands is recognised as a big perhaps the biggest challenge for the industry. The way heat has been delivered in the UK has not fundamentally changed for decades and huge investments have been made in gas infrastructure assets ranging from import terminals to networks through to the appliances in our homes. Changing how heat is delivered whichever way is chosen will be a major economic and practical challenge affecting families and businesses everywhere. Any plan to decarbonise will need to address power and transport alongside heat. Our report has also looked at potential decarbonisation of power and transport as part of a whole energy system approach.

In this report we explore ways that the heat sector can be decarbonised by looking at four possible future scenarios set in 2050. These stylised scenarios present illustrative snapshots of alternative energy solutions. The scenarios do not present a detailed roadmap – indeed the future may include some elements from each. We have analysed the advantages disadvantages and costs of each scenario. All our scenarios meet the 2050 Carbon emissions targets. In this report we have concentrated on reductions to CO₂ emissions and we have not considered other greenhouse gases.

This document provides guidance on the commercial and strategic elements of a heat network project to support completion of a project business case.

The guidance is intended for local authorities and heat network developers to support their investigations and enable progression from feasibility stage through to business case delivery. The guidance has been drafted with reference to policy legislation and regulation in England and Wales; however much of the guidance is likely also to be relevant to projects in Scotland and Northern Ireland.

The guidance specifically supports the HMT Green Book Five Cases Business Model (the Five Cases Model) and the derived DBEIS Business Case Template (DBEIS BCT) that follows this structure but will also be applicable in other instances. The Five Cases Model (and similarly the DBEIS BCT) considers the viability of the project from five perspectives:

• Strategic
• Economic
• Commercial
• Financial
• Management

Although all five elements are relevant this guide particularly focuses on the Strategic and Commercial cases.

Related Document Heat Networks 2020

In order for fuel cell vehicles to develop a widespread role in society it is essential that hydrogen refuelling stations become established. For this to happen there is a need to demonstrate the safety of the refuelling stations. The work described in this paper was carried out to provide experimental information on hydrogen outflow dispersion and explosion behaviour. In the first phase homogeneous hydrogen-air-mixtures of a known concentration were introduced into an explosion chamber and the resulting flame speed and overpressures were measured. Hydrogen concentration was the dominant factor influencing the flame speed and overpressure. Secondly high-pressure hydrogen releases were initiated in a storage room to study the accumulation of hydrogen. For a steady release with a constant driving pressure the hydrogen concentration varied as the inlet airflow changed depending on the ventilation area of the room the external wind conditions and also the buoyancy induced flows generated by the accumulating hydrogen. Having obtained this basic data the realistic dispersion and explosion experiments were executed at full-scale in the hydrogen station model. High-pressure hydrogen was released from 0.8-8.0mm nozzle at the dispenser position and inside the storage room in the full-scale model of the refuelling station. Also the hydrogen releases were ignited to study the overpressures that can be generated by such releases. The results showed that overpressures that were generated following releases at the dispenser location had a clear correlation with the time of ignition distance from ignition point.

This paper describes research work that has been performed at LSBU using both a laminar burning velocity rig and a small scale cylindrical explosion vessel to explore the use of very fine water fog nitrogen dilution and sodium hydroxide additives in the mitigation of hydrogen deflagrations. The results of the work suggest that using a combination of the three measures together produces the optimal mitigation performance and can be extremely effective in: inhibiting the burning velocity reducing the rate of explosion overpressure rise and narrowing the flammability limits of hydrogen-oxygen-nitrogen mixtures.

Hydrogen technologies are expected to play a key role in implementing the transition from a fossil fuel- based to a more sustainable lower-carbon energy system. To facilitate their widespread deployment the safe operation and hydrogen systems needs to be ensured together with the evaluation of the associated risk.<br/>HIAD has been designed to be a collaborative and communicative web-based information platform holding high quality information of accidents and incidents related to hydrogen technologies. The main goal of HIAD was to become not only a standard industrial accident database but also an open communication platform suitable for safety lessons learned and risk communication as well as a potential data source for risk assessment; it has been set up to improve the understanding of hydrogen unintended events to identify measures and strategies to avoid incidents/accidents and to reduce the consequence if an accident occurs.<br/>In order to achieve that goal the data collection is characterized by a significant degree of detail and information about recorded events (e.g. causes physical consequences lesson learned). Data are related not only to real incident and accidents but also to hazardous situations.<br/>The concept of a hydrogen accident database was generated in the frame of the project HySafe an EC co-funded NoE of the 6th Frame Work Programme. HIAD was built by EC-JRC and populated by many HySafe partners. After the end of the project the database has been maintained and populated by JRC with publicly available events. The original idea was to provide a tool also for quantitative risk assessment able to conduct simple analyses of the events; unfortunately that goal could not be reached because of a lack of required statistics: it was not possible to establish a link with potential event providers coming from private sector not willing to share information considered confidential. Starting from June 2016 JRC has been developing a new version of the database (i.e. HIAD 2.0); the structure of the database and the web-interface have been redefined and simplified resulting in a streamlined user interface compared to the previous version of HIAD. The new version is mainly focused to facilitate the sharing of lessons learned and other relevant information related to hydrogen technology; the database will be public and the events will be anonymized. The database will contribute to improve the safety awareness fostering the users to benefit from the experiences of others as well as to share information from their own experiences.

There has recently been a concerted effort to commence a transition to fuel cell vehicles (FCVs) in Europe. A coalition of companies released an influential McKinsey-coordinated report in 2010 which concluded that FCVs are ready for commercial deployment. Public–private H2Mobility programmes have subsequently been established across Europe to develop business cases for the introduction of FCVs. In this paper we examine the conclusions of these studies from an energy systems perspective using the UK as a case study. Other UK energy system studies have identified only a minor role for FCVs after 2030 but we reconcile these views by showing that the differences are primarily driven by different data assumptions rather than methodological differences. Some energy system models do not start a transition to FCVs until around 2040 as they do not account for the time normally taken for the diffusion of new powertrains. We show that applying dynamic growth constraints to the UK MARKAL energy system model more realistically represents insights from innovation theory. We conclude that the optimum deployment of FCVs from an energy systems perspective is broadly in line with the roadmap developed by UK H2Mobility and that a transition needs to commence soon if FCVs are to become widespread by 2050.