Publications

Photovoltaic (PV) is promising to supply power for residential buildings. Battery is the most widely employed storage method to mitigate the intermittence of PV and to overcome the mismatch between production and load. Hydrogen storage is another promising method that it is suitable for long-term storage. This study focuses on the comparison of self-sufficiency ratio and cost performance between battery storage and hydrogen storage for a residential building in Sweden. The results show that battery storage is superior to the hydrogen storage in the studied case. Sensitivity study of the component cost within the hydrogen storage system is also carried out. Electrolyzer cost is the most sensitive factor for improving system performance. A hybrid battery and hydrogen storage system which can harness the advantages of both battery and hydrogen storages is proposed in the last place.

This review paper examines the key barriers to using green ammonia as an alternative fuel in maritime industry. A literature survey is performed based on research articles and grey literature with the aim of discussing the technoeconomic problems with and benefits of ammonia and the relevant technologies. The limitations of ammonia as a maritime fuel and its supply chain the expected percentage demand by 2030 and 2050 its economic performance compared to other shipping fuels such as hydrogen and the current regulations that may impact ammonia as a maritime fuel are discussed. There are several key barriers to ammonia’s wide adoption: (1) High production costs due to the high capital costs associated with ammonia’s supply chain; (2) availability specifically the limited geographical locations available for ammonia bunkering; (3) the challenge of ramping up current ammonia production; and (4) the development of ammonia-specific regulations addressing issues such as toxicity safety and storage. The general challenges involved with blue ammonia are the large energy penalty and associated operational costs and a lack of technical expertise on its use. Regardless of the origin for ammonia to be truly zero-carbon its whole lifecycle must be considered—a key challenge that will aid in the debate about whether ammonia holds promise as a zero-carbon maritime fuel.

Study of flame acceleration and deflagration-to-detonation transition (DDT) in obstructed channels is an important subject of research for hydrogen safety. Experiments and numerical simulations of DDT in channels equipped with triangular obstacles were conducted in this work. High-speed schlieren photography and pressure records were used to study the flame shape changes flame propagation and pressure build up in the experiments. In the simulations the fully compressible reactive Navier–Stokes equations coupled with a calibrated chemical-diffusion model for stoichiometric hydrogen-oxygen mixture were solved using a high-order numerical method. The simulations were in good agreement with the experiments. The results show that the triangular obstacles significantly promote the flame acceleration and provide conditions for the occurrence of DDT. In the early stages of flame acceleration vortices are generated in the gaps between adjacent obstacles which is the main cause for the flame roll-up and distortion. A positive feedback mechanism between the combustiongenerated flow and flame propagation results in the variations of the size and velocity of vortices. The flame-vortex interactions cause flame fragmentation and consequently rapid growth in flame surface area which further lead to flame acceleration. The initially laminar flame then develops into a turbulent flame with the creation of shocks shock-flame interactions and various flame instabilities. The continuously arranged obstacles interact with shocks and flames and help to create environments in which a detonation can develop. Both flame collision and flame-shock interaction can give rise to detonation in the channels with triangular obstacles.

Ni₃S₂ and NiS supported on carbon spheres are successfully synthesized by a facile hydrothermal method. And then a series of physical characterizations included XRD (X-ray diffraction) EDS (energy dispersive spectroscopy) FESEM (field emission scanning electron microscopy) and XPS (X-ray photo-electron spectroscopy) were used to analyze the samples. XRD was used to confirm that NiNi₃S₂ S2 and NiS were successfully fabricated. FESEM indicated that Ni₃S₂ and NiS disperse well on carbon spheres. Electrochemical tests showed that nickel sulfides supported by carbon spheres exhibited excellent hydrogen evolution performance. The excellent catalytic activity is attributed to the synergistic effect of carbon spheres and transition metal sulfides of which the carbon spheres act to enhance the electrical conductivity and the dispersion of Ni₃S₂ and NiS thus providing more active sites for the hydrogen evolution reaction.

Alternative energy resources have a significant function in the performance and decarbonization of power engendering schemes in the building application domain. Additionally “green buildings” play a special role in reducing energy consumption and minimizing CO2 emissions in the building sector. This research article analyzes the performance of alternative primary energy sources (sun and hydrogen) integrated into a hybrid photovoltaic panel/fuel cell system and their optimal synergy to provide green energy for a green building. The study addresses the future hydrogen-based economy which involves the supply of hydrogen as the fuel needed to provide fuel cell energy through a power distribution infrastructure. The objective of this research is to use fuel cells in this field and to investigate their use as a green building energy supply through a hybrid electricity generation system which also uses photovoltaic panels to convert solar energy. The fuel cell hydrogen is supplied through a distribution network in which hydrogen production is outsourced and independent of the power generation system. The case study creates virtual operating conditions for this type of hybrid energy system and simulates its operation over a one-year period. The goal is to demonstrate the role and utility of fuel cells in virtual conditions by analyzing energy and economic performance indicators as well as carbon dioxide emissions. The case study analyzes the optimal synergy between photovoltaic panels and fuel cells for the power supply of a green building. In the simulation an optimally configured hybrid system supplies 100% of the energy to the green building while generating carbon dioxide emissions equal to 11.72% of the average value calculated for a conventional energy system providing similar energy to a standard residential building. Photovoltaic panels account for 32% of the required annual electricity production and the fuel cells generate 68% of the total annual energy output of the system.

Hydrogen fuel cell vehicles are expected to play an important role in the future and thus have improved significantly over the past years. Hydrogen fuel cell motorcycles with a small container for compressed hydrogen gas have been developed in Japan along with related regulations. As a result national regulations have been established in Japan after discussions with Japanese motorcycle companies stakeholders and experts. The concept of Japanese regulations was proposed internationally and a new international regulation on hydrogen-fueled motorcycles incorporating compressed hydrogen storage systems based on this concept are also established as United Nations Regulation No. 146. In this paper several technical regulations on hydrogen safety specific to fuel cell motorcycles incorporating compressed hydrogen storage systems are summarized. The unique characteristics of these motorcycles e.g. small body light weight and tendency to overturn easily are considered in these regulations.

The Institution of Gas Engineers & Managers (IGEM) is the UK’s Professional Engineering Institution supporting individuals and businesses working in the global gas industry. IGEM was founded in 1863 with the purpose of advancing the science and relevant knowledge of gas engineering for the benefit of the public.



As a not-for-profit independent organisation IGEM acts as a trusted source of technical information guidance and services for the gas sector. In today’s net zero context IGEM is focused on engineering a sustainable gas future – we do this by:

• Helping our members achieve and uphold the highest standards of professional competence to ensure the safety of the public
• Supporting our members in achieving their career goals by providing high quality products services and personal and professional development opportunities 
• Acting as the voice of the gas industry when working with stakeholders to develop and improve gas policy. 

This document outlines the current UK gas policy landscape our stance and what contribution we are making as an organisation.

Rod-like molybdenum carbide (Mo₂C) microcrystals were obtained from the pyrolysis of Mo-containing organic-inorganic hybrid composite. We investigated the photocatalytic H₂ evolution activity of Mo₂C by constructing a Mo₂C-dye sensitizer photocatalyst system. A high quantum efficiency of 29.7% was obtained at 480 nm. Moreover Mo₂C catalyst can be easily recycled by simple filtration.

The present work investigates Power-to-Gas (PtG) options for variable Renewable Electricity storage into hydrogen through low temperature (alkaline and PEM) and high-temperature (SOEC) water electrolysis technologies. The study provides the assessment of the cost of the final product when hydrogen is employed for mobility (on-site refueling stations) electricity generation (by fuel cells in Power-to-Power systems) and grid injection in the natural gas network. Costs estimations are performed for 2013-2030 scenarios. A case study on the impact of variable Renewable Electricity storage by hydrogen generation on the Italian electricity and mobility sectors is presented.

The use of fossil fuels as an energy supply becomes increasingly problematic from the point of view of both environmental emissions and energy sustainability. As an alternative hydrogen is widely regarded as a key element for a potential energy solution. However differently from fossil fuels such as oil gas and coal the production of hydrogen requires energy. Alternative and intermittent renewable energy sources such as solar power wind power etc. present multiple advantages for the production of hydrogen. On the one hand the renewable sources contribute to a remarkable reduction of pollutants released to the air and on the other hand they significantly enhance the sustainability of energy supply. In addition the storage of energy in form of hydrogen has a huge potential to balance an effective and synergetic utilization of renewable energy sources. In this regard hydrogen storage technology is a key technology towards the practical application of hydrogen as “energy carrier”. Among the methods available to store hydrogen solid-state storage is the most attractive alternative from both the safety and the volumetric energy density points of view. Because of their appealing hydrogen content complex hydrides and complex hydride-based systems have attracted considerable attention as potential energy vectors for mobile and stationary applications. In this review the progresses made over the last century on the synthesis and development of tetrahydroborates and tetrahydroborate-based systems for hydrogen storage purposes are summarized.