Publications

This paper revisits the theoretical concepts of lock-in mechanisms to analyse transition processes in energy production and road transportation in the Nordic countries focussing on three technology platforms: advanced biofuels e-mobility and hydrogen and fuel cell electrical vehicles. The paper is based on a comparative analysis of case studies.<br/>The main lock-in mechanisms analysed are learning effects economies of scale economies of scope network externalities informational increasing returns technological interrelatedness collective action institutional learning effects and the differentiation of power.<br/>We show that very different path dependencies have been reinforced by the lock-in mechanisms. Hence the characteristics of existing regimes set the preconditions for the development of new transition pathways. The incumbent socio-technical regime is not just fossil-based but may also include mature niches specialised in the exploitation of renewable sources. This implies a need to distinguish between lock-in mechanisms favouring the old fossil-based regime well-established (mature) renewable energy niches or new pathways.

This report contains information on the relative risks of natural gas and hydrogen fires particularly regarding their visibility. The fires considered are those that could occur on the H100 Fife trial network. The H100 Fife project will connect a number of residential houses to 100% hydrogen gas supply. The project includes hydrogen production storage and a new distribution network. From a review of large and small-scale tests and incidents it is concluded that hydrogen flames are likely to be clearly visible for releases above 2 bar particularly for larger release rates. At lower pressures hydrogen flame visibility will be affected by ambient lighting background colour and release orientation although this is also the case for natural gas. Potential safety implications from lack of flame  visibility are that SGN workers other utility workers or members of the public could inadvertently come into contact with an ignited release. However some releases would be detected through noise thrown soil or interaction with objects. From a workshop and review of risk reduction measures and analysis of historical interference damage incidents it is concluded that flames with the potential for reduced visibility are adequately controlled. This is due to the likelihood of such scenarios occurring being low and that the consequences of coming into contact with such a flame are unlikely to be severe. These conclusions are supported by cost-benefit analysis that shows that no additional risk mitigation measures are justified for the H100 project. It is recommended that the cost-benefit analysis is revisited before applying the approach to a network wider than the H100 project. It was observed that the addition of odorant at relevant concentrations did not have an effect on the visibility of hydrogen flames.

This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.

This paper proposes that whilst the exact pathway to decarbonising heat in the UK is not yet clear there are a range of actions that could be taken in the next ten years to shift heat onto the right route to meet our 2050 net zero obligation. We already possess many of the skills and technologies required but there are a number of significant barriers preventing a spontaneous movement towards low carbon heat on the scale required – a starting impulse is needed.<br/><br/>Energy efficiency and low carbon heating have the potential to radically improve the quality of life of not just the poorest in our society but all residents of the United Kingdom. With the right approach the decarbonisation of heat can improve health outcomes for millions create new jobs in manufacturing and construction reduce air pollution in our cities and reduce the burden on our health service. This in addition to leading the world in mitigating the climate emergency.

A systematic method for obtaining a novel electrode structure based on PtCoMn ternary alloy catalyst supported on graphitic carbon nanofibers (CNF) for hydrogen evolution reaction (HER) in acidic media is proposed. Ternary alloy nanoparticles (Co0.6Mn0.4 Pt) with a mean crystallite diameter under 10 nm were electrodeposited onto a graphitic support material using a two-step pulsed deposition technique. Initially a surface functionalisation of the carbon nanofibers is performed with the aid of oxygen plasma. Subsequently a short galvanostatic pulse electrodeposition technique is applied. It has been demonstrated that if pulsing current is employed compositionally controlled PtCoMn catalysts can be achieved. Variations of metal concentration ratios in the electrolyte and main deposition parameters such as current density and pulse shape led to electrodes with relevant catalytic activity towards HER. The samples were further characterised using several physico-chemical methods to reveal their morphology structure chemical and electrochemical properties. X-ray diffraction confirms the PtCoMn alloy formation on the graphitic support and energy dispersive X-ray spectroscopy highlights the presence of the three metallic components from the alloy structure. The preliminary tests regarding the electrocatalytic activity of the developed electrodes display promising results compared to commercial Pt/C catalysts. The PtCoMn/CNF electrode exhibits a decrease in hydrogen evolution overpotential of about 250 mV at 40 mA cm⁻² in acidic solution (0.5 M H₂SO₄) when compared to similar platinum based electrodes (Pt/CNF) and a Tafel slope of around 120 mV dec−1 indicating that HER takes place under the Volmer-Heyrovsky mechanismm

Membrane reactors for hydrogen production can increase both the hydrogen production efficiency at small scale and the electric efficiency in micro-cogeneration systems when coupled with Polymeric Electrolyte Membrane fuel cells. This paper discusses the achievements of three European projects (FERRET FluidCELL BIONICO) which investigate the application of the membrane reactor concept to hydrogen production and micro-cogeneration systems using both natural gas and biofuels (biogas and bio-ethanol) as feedstock. The membranes used to selectively separate hydrogen from the other reaction products (CH4 CO2 H2O etc.) are of asymmetric type with a thin layer of Pd alloy (<5 μm) and supported on a ceramic porous material to increase their mechanical stability. In FERRET the flexibility of the membrane reactor under diverse natural gas quality is validated. The reactor is integrated in a micro-CHP system and achieves a net electric efficiency of about 42% (8% points higher than the reference case). In FluidCELL the use of bio-ethanol as feedstock for micro-cogeneration Polymeric Electrolyte Membrane based system is investigated in off-grid applications and a net electric efficiency around 40% is obtained (6% higher than the reference case). Finally BIONICO investigates the hydrogen production from biogas. While BIONICO has just started FERRET and FluidCELL are in their third year and the two prototypes are close to be tested confirming the potentiality of membrane reactor technology at small scale.

HyNet North West (NW) is an innovative integrated low carbon hydrogen production distribution and carbon capture utilisation and storage (CCUS) project. It provides hydrogen distribution and CCUS infrastructure across Liverpool Manchester and parts of Cheshire in support of the Government’s Clean Growth Strategy (CGS) and achievement of the UK’s emissions reduction targets.<br/>Hydrogen will be produced from natural gas and sent via a new pipeline to a range of industrial sites for injection as a blend into the existing natural gas network and for use as a transport fuel. Resulting carbon dioxide (CO2) will be captured and together with CO2 from local industry which is already available sent by pipeline for storage offshore in the nearby Liverpool Bay gas fields. Key data for the Project are presented in Table ES1.

There is a need for alternative fuels in the shipping sector for two main motivations: to deliver a reduction in local pollutants and comply with existing regulation; and to mitigate climate change and cut greenhouse gas emissions. However any alternative fuel must meet a range of criteria to become a viable option. Key among them is the requirement that it can deliver emissions reductions over its full life-cycle. For a set of fuels comprising both conventional and alternative fuels together with associated production pathways this paper presents a life-cycle assessment with respect to six emissions species: local pollutants sulphur oxides nitrogen oxides and particulate matter; and greenhouse gases carbon dioxide methane and nitrous oxide. While the analysis demonstrates that no widely available fuel exists currently to deliver on both motivations some alternative fuel options have the potential if key barriers can be overcome. Hydrogen or other synthetic fuels rely on decarbonisation of both energy input to production and other feedstock materials to deliver reductions in greenhouse gas emissions. Similarly bio-derived fuels can be an abatement option but only if it can be ensured that land-use change whilst growing biomass does not impact wider potential savings and the sector is able to compete sufficiently for their use. These examples show that crucial barriers are located upstream in the respective fuel life-cycle and that the way to overcome them may reside beyond the scope of the shipping sector alone.

This study is a review of hydrogen station patents using the Derwent Innovation system and also a secondary screening. This was undertaken by the researchers to better understand and identify hydrogen station trends. The review focuses on analyzing the developing trends of patent technologies associated with a hydrogen station. The results of the review indicated that the countries with the major distribution of patents were Japan China the USA and Europe. Japan is leading the developmental trajectory of hydrogen stations. The results of the analysis found the leading developers of these patented technologies are Kobe Steel Nippon Oil Toyota and Honda. Other active patent developers analyzed include Linde Hyundai and Texaco. The review concludes with a suggestion that using a patent analysis methodology is a good starting point to identify evaluate and measure the trend in hydrogen station commercial development.

The possibility of flame acceleration (FA) and deflagration-to-detonation transition (DDT) when homogeneous hydrogen-carbon monoxide-air (H2-CO-air) mixtures are used rises the need for an efficient simulation approach for safety assessment. In this study a modelling approach for H2-CO-air flames incorporating deflagration and detonation within one framework is presented. It extends the previous work on H2-air mixtures. The deflagration is simulated by means of the turbulent flame speed closure model incorporating a quenching term. Since high flow velocities e.g. the characteristic speed of sound of the combustion products are reached during FA the flow passing obstacles generates turbulence at high enough levels to partially quench the flame. Partial flame quenching has the potential to stall the onset of detonation. An altered formulation for quenching is introduced to the modelling approach to better account for the combustion characteristics for accelerating lean H2-CO-air flames. The presented numerical approach is validated with experimental flame velocity data of the small-scale GraVent test rig [1] with homogeneous fuel contents of 22.5 and 25.0 vol-% and fuel compositions of 75/25 and 50/50 vol-% H2/CO respectively. The impact of the quenching term is further discussed on simulations of the FZK-7.2m test rig [2] whose obstacle spacing is smaller than the spacing in the GraVent test rig.

The competition between chemical energy release rate and volumetric expansion related to shock wave’s dynamics is of primary importance for a number of situations relevant to explosion safety. While studies have been performed on this topic over the years they have been limited to mixtures with monotonous energy release profile. In the present study the ignition of H2-NO2/N2O4 mixtures which exhibit a single-step or a two-step energy release rate profile depending on the equivalence ratio has been investigated under volumetric expansion conditions. The rate of expansion has been calculated using the Taylor-Sedov solution and accounted for using 0-D numerical simulations with time-dependent specific volume. The results were analyzed in terms of a Damkohler number defined as the ratio of the expansion to ignition times. For mixtures with non-monotonous energy release rate profiles two critical Damkohler numbers can be identified one for each of the steps of energy release. It was also shown that the fluid element which is the most likely to ignite corresponds to the one behind a shock propagating at the Chapman-Jouguet velocity. The thermo-chemical dynamics have been analyzed about the critical conditions using energy release rate per reaction rate of production and sensitivity analyses.