Skip to content
1900

A Review at the Role of Storage in Energy Systems with a Focus on Power to Gas and Long-term Storage

Abstract

A review of more than 60 studies (plus m4ore than 65 studies on P2G) on power and energy models based on simulation and optimization was done. Based on these, for power systems with up to 95% renewables, the electricity storage size is found to be below 1.5% of the annual demand (in energy terms). While for 100% renewables energy systems (power, heat, mobility), it can remain below 6% of the annual energy demand. Combination of sectors and diverting the electricity to another sector can play a large role in reducing the storage size. From the potential alternatives to satisfy this demand, pumped hydro storage (PHS) global potential is not enough and new technologies with a higher energy density are needed. Hydrogen, with more than 250 times the energy density of PHS is a potential option to satisfy the storage need. However, changes needed in infrastructure to deal with high hydrogen content and the suitability of salt caverns for its storage can pose limitations for this technology. Power to Gas (P2G) arises as possible alternative overcoming both the facilities and the energy density issues. The global storage requirement would represent only 2% of the global annual natural gas production or 10% of the gas storage facilities (in energy equivalent). The more options considered to deal with intermittent sources, the lower the storage requirement will be. Therefore, future studies aiming to quantify storage needs should focus on the entire energy system including technology vectors (e.g. Power to Heat, Liquid, Gas, Chemicals) to avoid overestimating the amount of storage needed.

Countries: Netherlands
Loading

Article metrics loading...

/content/journal1090
2017-08-31
2024-11-21
/content/journal1090
Loading
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error