Germany

Green hydrogen can help to decarbonize parts of the transportation sector but its power sector interactions are not well understood so far. It may contribute to integrating variable renewable energy sources if production is sufficiently flexible in time. Using an open-source co-optimization model of the power sector and four options for supplying hydrogen at German filling stations we find a trade-of between energy efficiency and temporal flexibility. For lower shares of renewables and hydrogen more energy-efficient and less flexible small-scale on-site electrolysis is optimal. For higher shares of renewables and/or hydrogen more flexible but less energy-efficient large-scale hydrogen supply chains gain importance as they allow to temporally disentangle hydrogen production from demand via storage. Liquid hydrogen emerges as particularly beneficial followed by liquid organic hydrogen carriers and gaseous hydrogen. Large-scale hydrogen supply chains can deliver substantial power sector benefits mainly through reduced renewable curtailment. Energy modelers and system planners should consider the distinct flexibility characteristics of hydrogen supply chains in more detail when assessing the role of green hydrogen in future energy transition scenarios. We also propose two alternative cost and emission metrics which could be useful in future analyses.

The simultaneous photocatalytic H2 evolution with environmental remediation over semiconducting metal oxides is a fascinating process for sustainable fuel production. However most of the previously reported photocatalytic reforming showed nonstoichiometric amounts of the evolved H2 when organic substrates were used. To explain the reasons for this phenomenon a careful analysis of the products and intermediates in gas and aqueous phases upon the photocatalytic hydrogen evolution from oxalic acid using Pt/TiO2 was performed. A quadrupole mass spectrometer (QMS) was used for the continuous flow monitoring of the evolved gases while high performance ion chromatography (HPIC) isotopic labeling and electron paramagnetic resonance (EPR) were employed to understand the reactions in the solution. The entire consumption of oxalic acid led to a ~30% lower H2 amount than theoretically expected. Due to the contribution of the photoKolbe reaction mechanism a tiny amount of formic acid was produced then disappeared shortly after the complete consumption of oxalic acid. Nevertheless a much lower concentration of formic acid was generated compared to the nonstoichiometric difference between the formed H2 and the consumed oxalic acid. Isotopic labeling measurements showed that the evolved H2 HD and/or D2 matched those of the solvent; however using D2O decreased the reaction rate. Interestingly the presence of KI as an additional hole scavenger with oxalic acid had a considerable impact on the reaction mechanism and thus the hydrogen yield as indicated by the QMS and the EPR measurements. The added KI promoted H2 evolution to reach the theoretically predictable amount and inhibited the formation of intermediates without affecting the oxalic acid degradation rate. The proposed mechanism by which KI boosts the photocatalytic performance is of great importance in enhancing the overall energy efficiency for hydrogen production via photocatalytic organic reforming.

The large-scale storage of hydrogen in salt caverns modelled on today’s natural gas storage is a promising approach to storing renewable energy over a large power range and for the required time period. An essential subsystem of the overall gas storage is the surface facility and in particular the compressor system. The future design of compressor systems for hydrogen storage strongly depends on the respective boundary conditions. Therefore this work analyses the requirements of compressor systems for cavern storage facilities for the storage of green hydrogen i.e. hydrogen produced from renewable energy sources using the example of Lower Saxony in Germany. In this course a hydrogen storage demand profile of one year is developed in hourly resolution from feed-in time series of renewable energy sources. The injection profile relevant for compressor operation is compared with current natural gas injection operation modes

Power-to-Methane (PtM) can provide flexibility to the electricity grid while aiding decarbonization of other sectors. This study focuses specifically on the methanation component of PtM in 2050. Scenarios with 80–95% CO₂ reduction by 2050 (vs. 1990) are analyzed and barriers and drivers for methanation are identified. PtM arises for scenarios with 95% CO₂ reduction no CO₂ underground storage and low CAPEX (75 €/kW only for methanation). Capacity deployed across EU is 40 GW (8% of gas demand) for these conditions which increases to 122 GW when liquefied methane gas (LMG) is used for marine transport. The simultaneous occurrence of all positive drivers for PtM which include limited biomass potential low Power-to-Liquid performance use of PtM waste heat among others can increase this capacity to 546 GW (75% of gas demand). Gas demand is reduced to between 3.8 and 14 EJ (compared to ∼20 EJ for 2015) with lower values corresponding to scenarios that are more restricted. Annual costs for PtM are between 2.5 and 10 bln€/year with EU28’s GDP being 15.3 trillion €/year (2017). Results indicate that direct subsidy of the technology is more effective and specific than taxing the fossil alternative (natural gas) if the objective is to promote the technology. Studies with higher spatial resolution should be done to identify specific local conditions that could make PtM more attractive compared to an EU scale.

The safest way to store hydrogen is in solid form physically entrapped in molecular form in highly porous materials or chemically bound in atomic form in hydrides. Among the different families of these compounds alkaline and alkaline earth metals alumino-hydrides (alanates) have been regarded as promising storing media and have been extensively studied since 1997 when Bogdanovic and Schwickardi reported that Ti-doped sodium alanate could be reversibly dehydrogenated under moderate conditions. In this review the preparative methods; the crystal structure; the physico-chemical and hydrogen absorption-desorption properties of the alanates of Li Na K Ca Mg Y Eu and Sr; and of some of the most interesting multi-cation alanates will be summarized and discussed. The most promising alanate-based reactive hydride composite (RHC) systems developed in the last few years will also be described and commented on concerning their hydrogen absorption and desorption performance.

The present work performed within the PRESLHY EC-project presents a simplified 1-d transient modelling methodology to account for discharge line effects during blowdown. The current formulation includes friction extra resistance area change and heat transfer through the discharge line walls and is able to calculate the mass flow rate and distribution of all physical variables along the discharge line. Choked flow at any time during the transient is calculated using the Possible Impossible Flow (PIF) algorithm. Hydrogen single phase physical properties and vapour-liquid equilibrium are calculated using the Helmholtz Free Energy (HFE) formulation. Homogeneous Equilibrium Mixture (HEM) model is used for two-phase physical properties. Validation is performed against the new experiments with compressed gaseous hydrogen performed at the DISCHA facility in the framework of PRESLHY (200 bar ambient and cryogenic initial tank temperature 77 K and 4 nozzle diameters 0.5 1 2 and 4 mm) and an older experiment at 900 bar ambient temperature and 2 mm nozzle. Predictions are compared against measured data from the experiments and the relative importance of line heat transfer compared to flow resistance is analysed.

In many industries low-carbon hydrogen will substitute fossil fuels in the course of the transformation to climate neutrality. This paper contributes to understanding this transformation. This paper provides an overview of energy- and emission-intensive industry sectors with great potential to defossilize their production processes with hydrogen. An assessment of future hydrogen demand for various defossilization strategies in Germany that rely on hydrogen as a feedstock or as an energy carrier to a different extent in the sectors steel chemicals cement lime glass as well as pulp and paper is carried out. Results indicate that aggregate industrial hydrogen demand in those industries would range between 197 TWh and 298 TWh if production did not relocate abroad for any industry sector. The range for hydrogen demand is mainly due to differences in the extent of hydrogen utilization as compared to alternative transformation paths for example based on electrification. The attractiveness of production abroad is then assessed based on the prospective comparative cost advantage of relocating parts of the value chain to excellent production sites for low-carbon hydrogen. Case studies are provided for the steel industry as well as the chemical industry with ethylene production through methanol and the production of urea on the basis of ammonia. The energy cost of the respective value chains in Germany is then compared to the case of value chains partly located in regions with excellent conditions for renewable energies and hydrogen production. The results illustrate that at least for some processes – as ammonia production – relocation to those favorable regions may occur due to substantial comparative cost advantages.

In recent years production and supply of hydrogen has gained significant attention within the German energy transition. This is due to increasingly urgent pressures to mitigate climate change and geopolitical imperatives to substitute natural gas. Hydrogen is seen as an important cross-sectoral energy carrier serving multiple functions including heat production for industry and households fuel for transportation and energy storage for stabilization of electricity supply. In the context of various funding mechanisms on several administrative levels regional value chains for green hydrogen supply are emerging. To date however few studies analyzing regional hydrogen systems exist. Due to its high projected demand of energy sources for heating industrial processes and mobility Germany appears to be a very relevant research area in this emerging field. Situated within the concept of the multi-level perspective this article examines the way how regional “niches” of green hydrogen evolve and how they are organized. The study takes an evolutionary perspective in analyzing processes of embedding green hydrogen infrastructures in regional energy regimes which entered “re-configuration”-pathways. It argues that the congruence of available resources for renewable electricity established networks of institutional entrepreneurs and access to higher level funding are conditions which put incumbent regime-actors in favorable positions to implement green hydrogen niches. Conversely the embedding of green hydrogen infrastructures in regional energy systems is a case in point of how the attributes of niches in particular technological domains can be used to explain the transition pathway entered by a surrounding energy regime.

The need to drastically reduce greenhouse gas emissions is driving the development of existing and new technologies to produce and use hydrogen. Anion exchange membrane electrolysis is one of these rapidly developing technologies and presents promising characteristics for efficient hydrogen production. However the environmental performance and the material criticality of anion exchange membrane electrolysis must be assessed. In this work prospective life cycle assessment and criticality assessment are applied first to identify environmental and material criticality hotspots within the production of anion exchange membrane electrolysis units and second to benchmark hydrogen production against proton exchange membrane electrolysis. From an environmental point of view the catalyst spraying process heavily dominates the ozone depletion impact category while the production of the membrane represents a hotspot in terms of the photochemical ozone formation potential. For the other categories the environmental impacts are distributed across different components. The comparison of hydrogen production via anion exchange membrane electrolysis and proton exchange membrane electrolysis shows that both technologies involve a similar life-cycle environmental profile due to similar efficiencies and the leading role of electricity generation for the operation of electrolysis. Despite the fact that for proton exchange membrane electrolysis much less material is required due to a higher lifetime anion exchange membrane electrolysis shows significantly lower raw material criticality since it does not rely on platinum-group metals. Overall a promising environmental and material criticality performance of anion exchange membrane electrolysis for hydrogen production is concluded subject to the expected technical progress for this technology.

Green hydrogen promises to be critical in achieving a sustainable and renewable energy transition. As green hydrogen is produced with renewables green hydrogen could become an energy storage medium of the future and even substitute the current unsustainable grey or blue hydrogen used in the industry. Bringing this transition into reality for instance in Germany there are visions to rapidly build hydrogen facilities in Africa and export the produced green hydrogen to Europe. One problem however is that these visions presumably conflict with the visions of actors within Africa. Therefore this study aims to provide an initial assessment of African stakeholders’ visions for future energy exports and renewable energy expectations. By comparing visions from Germany and Africa this assessment was conducted to identify differences in green energy and hydrogen visions that could lead to conflict and similarities that could be the basis for cooperation. The National Hydrogen Strategy outlines the German visions which clarifies that Germany will have to import green hydrogen to meet its green transition target. In this context of future energy export demand a partnership between German and African researchers on assessing green hydrogen potentials in Africa started. The African visions were explored by surveying the partners from different African countries working on the project. The results revealed that while both sides see the need for an immediate transition to renewable energy the African side is not envisioning the immediate export of green hydrogen. Based on the responses the partners are primarily concerned with improving the continent’s still deficient energy access for both the population and industry. Nevertheless this African perspective greatly emphasises cross-border cooperation where both sides can realise their visions. In the case of Germany that German investment could build infrastructure which would benefit the receiving African country or countries and open up the possibility for the envisioned green hydrogen export to Europe.

Hydrogen is gaining importance to decarbonize the energy system and tackle the climate crisis. This exploratory study analyzes three focus groups with representatives from relevant organizations in a Northern German region that has unique beneficial characteristics for the transition to a hydrogen economy. Based upon this data (1) a category system of innovation adoption barriers for hydrogen technologies is developed (2) decision levels associated with the barriers are identified (3) detailed insights on how decision levels contribute to the adoption barriers are provided and (4) the barriers are evaluated in terms of their importance. Our analysis adds to existing literature by focusing on short-term barriers and exploring relevant decision levels and their associated adoption barriers. Our main results comprise the following: flaws in the funding system complex approval procedures lack of networks and high costs contribute to hydrogen adoption barriers. The (Sub-)State level is relevant for the uptake of the hydrogen economy. Regional entities have leeway to foster the hydrogen transition especially with respect to the distribution infrastructure. Funding policy technological suitability investment and operating costs and the availability of distribution infrastructure and technical components are highly important adoption barriers that alone can impede the transition to a hydrogen economy.

Chile abundant in solar and wind energy resources presents significant potential for the production of green hydrogen a promising renewable energy vector. However realizing this potential requires an understanding of the most suitable locations for the installation of green hydrogen industries. This study proposes a quantitative methodology that identifies and ranks potential public lands for industrial use based on a range of technical parameters (such as solar and wind availability) and socio-environmental considerations (including land use restrictions and population density). The results reveal optimal locations that can facilitate informed sustainable decision-making for large-scale green hydrogen implementation in Chile. While this methodology does not replace project-specific technical or environmental impact studies it provides a flexible general classification to guide initial site selection. Notably this approach can be applied to other regions worldwide with abundant solar and wind resources such as Australia and Northern Africa promoting more effective and sustainable global decision-making for green hydrogen production.

While the share of renewable energy sources increased within the last years with an ongoing upward trend the energy sector is facing the problem of storing large amounts of electrical energy properly. To compensate daily and seasonal fluctuations a sufficient storage system has to be developed. The storage of hydrogen in the subsurface referred to as Underground Hydrogen Storage (UHS) shows potential to be a solution for this problem. Hydrogen produced from excess energy via electrolysis is injected into a subsurface reservoir and withdrawn when required. As hydrogen possesses unique thermodynamic properties many commonly used correlations can not be simply transferred to a system with a high hydrogen content. Mixing processes with the present fluids are essential to be understood to achieve high storage efficiencies. Additionally in the past microbial activity e.g. by methanogenic archaea was observed leading to a changing fluid composition over time. To evaluate the capability of reservoir simulators to cover these processes the present study establishes a benchmark scenario of an exemplary underground hydrogen storage scenario. The benchmark comprises of a generic sandstone gas reservoir and a typical gas storage schedule is defined. Based on this benchmark the present study assesses the capabilities of the commercial simulator Schlumberger ECLIPSE and the open-source simulator DuMux to mimic UHS related processes such as hydrodynamics but also microbial activity. While ECLIPSE offers a reasonable mix of user-friendliness and computation time DuMux allows for a better adjustment of correlations and the implementation of biochemical reactions. The corresponding input data (ECLIPSE format) and relevant results are provided in a repository to allow this simulation study’s reproduction and extension.

A key building block of the European Green Deal is the development of a hydrogen commodity market which requires a suitable hydrogen market design and the timely introduction of related policy measures. Using exploratory interviews with five expert groups we contribute to this novel research field by outlining the core market design criteria and proposing suitable regulations for the future European hydrogen market. We identify detailed recommendations along three core market design focus areas: Market development policy measures infrastructure regulations as well as hydrogen and certificate trading. Our findings provide an across-industry view of current policy-related key challenges in the hydrogen commodity market development and mitigation approaches. We therefore support policymakers within the EU in the ongoing detailing of their regulatory hydrogen and green energy packages. Further we promote hydrogen market development by assisting current and future industry players in finding a common understanding of the future hydrogen market design.

Globally a green hydrogen economy rush is underway and many companies investors governments and environmentalists consider it as an energy source that could foster the global energy transition. The enormous potential for hydrogen production for domestic use and export places Africa in the spotlight in the green hydrogen economy discourse. This discourse remains unsettled regarding how natural resources such as land and water can be sustainably utilized for such a resource-intensive project and what implications this would have. This review argues that green hydrogen production (GHP) in Africa has consequences where land resources (and their associated natural resources) are concerned. It discusses the current trends in GHP in Africa and the possibilities for reducing any potential pressures it may put on land and other resource use on the continent. The approach of the review is interpretive and hinges on answering three questions concerning the what why and how of GHP and its land consequences in Africa. The review is based on 41 studies identified from Google Scholar and sources identified via snowballed recommendations from experts. The GHP implications identified relate to land and water use mining-related land stress and environmental ecological and land-related socioeconomic consequences. The paper concludes that GHP may not foster the global energy transition as is being opined by many renewable energy enthusiasts but rather could help foster this transition as part of a greener energy mix. It notes that African countries that have the potential for GHP require the institutionalization of or a change in their existing approaches to land-related energy governance systems in order to achieve success.

This paper analyses different levels and means of the electrification of space and hot water heating using an explorative modelling approach. The analysis provides guidance to the ongoing discussion on favourable pathways for heating buildings and the role of secondary energy carriers such as hydrogen or synthetic fuels. In total 12 different scenarios were modelled with decarbonisation pathways until 2050 which cover all 27 member states of the European Union. Two highly detailed optimisation models were combined to cover the building stock and the upstream energy supply sector. The analysis shows that decarbonisation pathways for space and water heating based on large shares of heat pumps have at least 11% lower system costs in 2050 than pathways with large shares of hydrogen or synthetic fuels. This translates into system cost savings of around €70 bn. Heat pumps are cost-efficient in decentralised systems and in centralised district heating systems. Hence heat pumps should be the favoured option to achieve a cost-optimal solution for heating buildings. Accordingly the paper makes a novel and significant contribution to understanding suitable and cost-efficient decarbonisation pathways for space and hot water heating via electrification. The results of the paper can provide robust guidance for policymakers.

This work evaluates the effectiveness of chemical-based solutions for storing large amounts of renewable electricity. Four “Power-to-X-to-Power” pathways are examined comprising hydrogen methane methanol and ammonia as energy carriers. The pathways are assessed using a model scenario where they are produced with electricity from an onshore wind farm stored in suitable facilities and then reconverted to electricity to meet the energy demand of a chemical site. An energy management and storage capacity estimation tool is used to calculate the annual load coverage resulting from each pathway. All four pathways offer a significant increase in load coverage compared to a scenario without storage solution (56.19%). The hydrogen-based pathway has the highest load coverage (71.88%) and round-trip efficiency (36.93%) followed by the ammonia-based (69.62% 31.37%) methanol-based (67.85% 27.00%) and methane-based (67.64% 26.47% respectively) pathways. The substantially larger storage capacity required for gaseous energy carriers to ensure a steady supply to the consumer could be a decisive factor. The hydrogen pathway requires a storage volume up to 10.93 times larger than ammonia and 16.87 times larger than methanol. Notably ammonia and methanol whose load coverages are only 2.26 and 4.03 percentage points lower than that of hydrogen offer the possibility of implementing site-specific storage solutions avoiding potential bottlenecks due to limited pipeline and cavern capacities.

The measures needed to limit global warming pose a particular challenge to current fossil fuel exporters who must not only decarbonise their local energy systems but also compensate for the expected decline in fossil fuel revenues. One possibility is seen in the export of green hydrogen. Using Algeria as a case study this paper analyses how different levels of ambition in hydrogen exports energy efficiency and fuel switching affect the costoptimal expansion of the power sector for a given overall emissions reduction path. Despite falling costs for photovoltaics and wind turbines the results indicate that in countries with very low natural gas prices such as Algeria a fully renewable electricity system by 2050 is unlikely without appropriate policy measures. The expansion of renewable energy should therefore start early given the high annual growth rates required which will be reinforced by additional green hydrogen exports. In parallel energy efficiency is a key factor as it directly mitigates CO2 emissions from fossil fuels and reduces domestic electricity demand which could instead be used for hydrogen production. Integrating electrolysers into the power system could potentially help to reduce specific costs through load shifting. Overall it seems advisable to analyse hydrogen exports together with local decarbonisation in order to better understand their interactions and to reduce emissions as efficiently as possible. These results and the methodology could be transferred to other countries that want to become green hydrogen exporters in the future and are therefore a useful addition for researchers and policy makers.

This report from the WP5 “Mitigation” provides information and test results regarding perturbations that hydrogen could cause to gas appliances when blended to natural gas especially on anatural draught for exhaust fumes or acidity for the condensates. The important topic of on-site adjustment is also studied with test results on alternative technologies and proposals of mitigation approaches.

The realization of a carbon-neutral civilization which has been set as a goal for the coming decades goes directly hand-in-hand with the need for an energy system based on renewable energies (REs). Due to the strong weather-related daily and seasonal fluctuations in supply of REs suitable energy storage devices must be included for such energy systems. For this purpose an energy system model featuring hybrid energy storage consisting of a hydrogen unit (for long-term storage) and a lithium-ion storage device (for short-term storage) was developed. With a proper design such a system can ensure a year-round energy supply by using electricity generated by photovoltaics (PVs). In the energy system that was investigated hydrogen (H2) was produced by using an electrolyser (ELY) with a PV surplus during the summer months and then stored in an H2 tank. During the winter due to the lack of PV power the H2 is converted back into electricity and heat by a fuel cell (FC). While the components of such a system are expensive a resource- and cost-efficient layout is important. For this purpose a Matlab/Simulink model that enabled an energy balance analysis and a component lifetime forecast was developed. With this model the results of extensive parameter studies allowed an optimized system layout to be created for specific applications. The parameter studies covered different focal points. Several ELY and FC layouts different load characteristics different system scales different weather conditions and different load levels—especially in winter with variations in heating demand—were investigated.

The decarbonization of the energy sector has been a subject of research and of political discussions for several decades gaining significant attention in the last years. It is commonly acknowledged that the most obvious way to achieve decarbonization is the use of renewable energy sources. Within the context of the energy sector decarbonization many mainly industrialized countries recently started developing national plans to establish a hydrogen-based economy in the very near future. The plans for green hydrogen initially try to (a) target sectors that are difficult to decarbonize and (b) address issues related to the storage and transportation of CO2-free energy. To achieve almost complete decarbonization electric power must be generated exclusively from renewable sources. In so-called Power-to-X (PtX) technologies green hydrogen is generated from electricity and subsequently converted to another energy carrier which can be further stored transported and used. In PtX X stands for example for liquid hydrogen methanol or ammonia. The challenges associated with decarbonization include those associated with (a) the expansion of renewable energies (e.g. high capital demand political and social issues) (b) the production transportation and storage of hydrogen and the energy carriers denoted by X in PtX (e.g. high cost and low overall efficiency) and (c) the expected significant increase in the demand for electrical energy. The paper discusses whether and under which conditions the current national and international hydrogen plans of many industrialized countries could lead to a maximization of decarbonization in the world. It concludes that in general as long as the conditions for generating large excess amounts of green electricity are not met the quick establishment of a hydrogen economy could not only be very expensive but also counterproductive to the worldwide decarbonization efforts.

The decarbonization of the global ship traffic is one of the industry’s greatest challenges for the next decades and will likely only be achieved with the introduction of synthetic fuels. Until now however not one single best technology solution emerged to ideally fit this task. Instead different energy carriers including hydrogen ammonia methanol methane and synthetic diesel are subject of discussion for usage in either internal combustion engines or fuel cells. In order to drive the selection procedure a case study for the year 2030 with all eligible combinations of power technologies and fuels is conducted. The assessment quantifies the technologies’ economic performances for cost-optimized system designs and in dependence of a ship’s mission characteristics. Thereby the influence of trends for electrofuel prices and shipboard volume opportunity costs are examined. Even if gaseous hydrogen is often considered not suitable for large ship applications due to its low volumetric energy density both the comparatively small fuel price and the high efficiency of fuel cells lead to the overall smallest system costs for passages up to 21 days depending on assumed cost parameters. Only for missions longer than seven days fuel cells operating on methanol or ammonia can compete with gaseous hydrogen economically.

A series of more than 100 experiments with hydrogen-air mixtures at cryogenic temperatures have been performed in a shock tube in the frame of the PRESLHY project. A wide range of hydrogen concentrations from 8 to 60%H2 in the shock tube of the length of 5 m and 50 mm id was tested at cryogenic temperatures from 80 to 130K at ambient pressure. Flame propagation regimes were investigated for all hydrogen compositions in the shock tube at three different blockage ratios (BR) 0 0.3 and 0.6 as a function of initial temperature. Pressure sensors and InGaAs-photodiodes have been applied to monitor the flame and shock propagation velocity of the process. The experiments at ambient pressure and temperature were conducted as the reference data for cryogenic experiments. A critical expansion ratio for an effective flame acceleration to the speed of sound was experimentally found at cryogenic temperatures. The detonability criterion for smooth and obstructed channels was used to evaluate the detonation cell sizes at cryogenic temperatures as well. The main peculiarities of cryogenic combustion with respect to the safety assessment were that the maximum combustion pressure was several times higher compared to ambient temperature and the run-up-distance to detonation was several times shorter independent of lower chemical reactivity at cryogenic conditions.

Governments and local authorities introduce new incentives and regulations for cleaner mobility as part of their environmental strategies to address energy challenges. Fuel cell electric vehicles (FCEVs) are becoming increasingly important and will extend beyond captive fleets reaching private users. Research on hydrogen safety issues is currently led in several projects in order to highlight and manage risks of FCEVs in confined spaces such as tunnels underground parkings repair garages etc. But what about private garages - that involve specific geometries volumes congestion ventilation? This study has been carried out in the framework of PRHyVATE JIP project which aims at better understanding hydrogen build-up and distribution in a private garage. The investigation went through different rates and modes of ventilation. As first step an HAZID (Hazard Identification) has been realized for a generic FCEV. This preliminary work allowed to select and prioritize accidental release scenarios to be explored experimentally with helium in a 40-m3 garage. Several configurations of release ventilation modes and congestion – in transient regime and at steady state – have been tested. Then analytical and numerical calculation approaches have been applied and adjusted to develop a simplified methodology. This methodology takes into account natural ventilation for assessment of hydrogen accumulation and mitigation means optimization. Finally a global risk evaluation – including ignition of a flammable hydrogen-air mixture – has been performed to account for the mostly feared events and to evaluate their consequences in a private garage. Thus preliminary recommendations good practices and safety features for safely parking FCEVs in private garages can be proposed.

Hydrogen as an energy carrier is very versatile in energy storage applications. Developments in novel sustainable technologies towards a CO2-free society are needed and the exploration of all-solid-state batteries (ASSBs) as well as solid-state hydrogen storage applications based on metal hydrides can provide solutions for such technologies. However there are still many technical challenges for both hydrogen storage material and ASSBs related to designing low-cost materials with low-environmental impact. The current materials considered for all-solid-state batteries should have high conductivities for Na+ Mg2+ and Ca2+ while Al3+-based compounds are often marginalised due to the lack of suitable electrode and electrolyte materials. In hydrogen storage materials the sluggish kinetic behaviour of solid-state hydride materials is one of the key constraints that limit their practical uses. Therefore it is necessary to overcome the kinetic issues of hydride materials before discussing and considering them on the system level. This review summarizes the achievements of the Marie Skłodowska-Curie Actions (MSCA) innovative training network (ITN) ECOSTORE the aim of which was the investigation of different aspects of (complex) metal hydride materials. Advances in battery and hydrogen storage materials for the efficient and compact storage of renewable energy production are discussed.

This paper aims to review existing energy-sector and hydrogen-energy-related legal policy and strategy documents in the ECOWAS region. To achieve this aim current renewable-energyrelated laws acts of parliament executive orders presidential decrees administrative orders and memoranda were analyzed. The study shows that ECOWAS countries have strived to design consistent legal instruments regarding renewable energy in developing comprehensive legislation and bylaws to consolidate it and to encourage investments in renewable energy. Despite all these countries having a legislative basis for regulating renewable energy there are still weaknesses that revolve around the law and policy regarding its possible application in green hydrogen production and use. The central conclusion of this review paper is that ECOWAS member states presently have no official hydrogen policies nor bylaws in place. The hydrogen rise presents a challenge and opportunity for members to play an important role in the fast-growing global hydrogen market. Therefore these countries need to reform their regulatory frameworks and align their policies by introducing green hydrogen production in order to accomplish their green economy transition for the future and to boost the continent’s sustainable development.

Hydrogen is a promising fuel to decarbonize aviation but macroeconomic studies are currently missing. Computable general equilibrium (CGE) models are suitable to conduct macroeconomic analyses and are frequently employed in hydrogen and aviation research. The main objective of this paper is to investigate existing CGE studies related to (a) hydrogen and (b) aviation to derive a macroeconomic research agenda for hydrogen-powered aviation. Therefore the well-established method of systematic literature review is conducted. First we provide an overview of 18 hydrogen-related and 27 aviation-related CGE studies and analyze the literature with respect to appropriate categories. Second we highlight key insights and identify research gaps for both the hydrogen and aviation-related CGE literature. Our findings comprise inter alia hydrogen’s current lack of cost competitiveness and the macroeconomic relevance of air transportation. Research gaps include among others a stronger focus on sustainable hydrogen and a more holistic perspective on the air transportation system. Third we derive implications for macroeconomic research on hydrogen-powered aviation including (I) the consideration of existing modeling approaches (II) the utilization of interdisciplinary data and scenarios (III) geographical suitability (IV) the application of diverse policy tools and (V) a holistic perspective. Our work contributes a meaningful foundation for macroeconomic studies on hydrogen-powered aviation. Moreover we recommend policymakers to address the macroeconomic perspectives of hydrogen use in air transportation.

One of the major advantages of SOFCs is their high fuel flexibility. Next to natural gas and hydrogen which are today’s most common fuels for SOFC-systems and cell-/stack-testing respectively various other fuels are applicable as well. In the literature a number of promising results show that available fuels as propane butane ammonia gasoline diesel etc. can be applied. Here the performance of an anode supported cell operated in specialized single cell test benches with different gaseous and liquid fuels and reformates thereof is presented. Fuels as ammonia dissolved urea (AddBlueTM) methane/steam and ethanol/water mixtures can directly be fed to the cell whereas propane and diesel require external reforming. It is shown that in case of a stable fuel supply the cell performance with such fuels is similar to that of appropriate mixtures of H2 N2 CO CO2 and steam if the impact of endothermic reforming or decomposition reactions is considered. Even though a stable fuel cell operation with such fuels is possible in a single cell test bench it should be pointed out that an appropriate fuel processing will be mandatory on the system level.

The goal of achieving water electrolysis on a gigawatt scale faces numerous challenges regarding technological feasibility and market application. Here the flexibility of operation scenarios such as load changes and capacity of electrolysis plays a key role. This raises the question of how flexible electrolysis systems currently are and what possibilities there are to increase flexibility. In order to be able to answer this question in the following a systematic literature research was carried out with the aim to show the current technical possibilities to adapt load and capacity of electrolysis technologies and to determine limits. The result of the systematic literature research is an overview matrix of the electrolysis types AEL PEMEL HTEL and AEMEL already applied in the market. Technical data on the operation of the respective electrolysis stacks as well as details and materials for the respective stack structure (cathode anode electrolyte) were summarized. The flexibility of the individual technologies is addressed by expressing it in values such as load flexibility and startup-times. The overview matrix contains values from various sour1ces in order to make electrolysis comparable at the stack level and to be able to make statements about flexibility. The result of the overview article shows the still open need for research and development to make electrolysis more flexible.

Power-to-X technologies that convert renewable electricity to chemically stored energy in “X” may provide a gaseous liquid or solid fuel that can be used in winter to provide both heat and electricity and thus replace fossil fuels that are currently used in many countries with cold winters. This contribution compares two options for power-to-X technologies for providing heat and electricity supply of buildings with high solar photovoltaic coverage at times of low solar availability. The option “compressed hydrogen” is based on water electrolysis that produces hydrogen on-site. This hydrogen is subsequently compressed and stored at high pressure (350 bar) for use in winter by a fuel cell. The option “aluminium redox-cycle” includes an inert electrode high temperature electrolysis process that is carried out at industrial scale. Produced aluminium is subseqeuntly transported to the site of use and converted to hydrogen and heat – and finally to electricity and heat - by aluminium-water reaction in combination with a fuel cell. Results of cost and LCA analysis show that the overall energetic efficiency of the compressed hydrogen process is slightly higher than for the aluminium redox cycle. However the aluminium redox-cycles needs far less on-site storage volume and is likely to become available at lower investment cost for the end user. Total annual cost of ownership and global warming potential of the two options are quite similar.

Hydrogen produced by water electrolysis and electrochemical batteries are widely considered as primary routes for the long- and short-term storage of photovoltaic (PV) energy. At the same time fast power ramps and idle periods in PV power generation may cause degradation of water splitting electrochemical (EC) cells. Implementation of batteries in PV-EC systems is a viable option for smoothening out intermittence of PV power. Notably the spreading of PV energy over the diurnal cycle reduces power of the EC cell and thus its overpotential loss. We study these potential advantages theoretically and experimentally for a simple parallel connected combination of PV EC and battery cells (PV-EC-B) operated without power management electronics. We show feasibility of the unaided operation of PV-EC-B device in a relevant duty cycle and explore how PV-EC-B system can operate at higher solar-to-hydrogen efficiency than the equivalent reference PV-EC system despite the losses caused by the battery.

This review describes recent research in the development of tank systems based on complex metal hydrides for thermolysis and hydrolysis. Commercial applications using complex metal hydrides are limited especially for thermolysis-based systems where so far only demonstration projects have been performed. Hydrolysis-based systems find their way in space naval military and defense applications due to their compatibility with proton exchange membrane (PEM) fuel cells. Tank design modeling and development for thermolysis and hydrolysis systems as well as commercial applications of hydrolysis systems are described in more detail in this review. For thermolysis mostly sodium aluminum hydride containing tanks were developed and only a few examples with nitrides ammonia borane and alane. For hydrolysis sodium borohydride was the preferred material whereas ammonia borane found less popularity. Recycling of the sodium borohydride spent fuel remains an important part for their commercial viability.

The technological lock-in of the transportation and industrial sector can be largely attributed to the limited availability of alternative fuel infrastructures. Herein a countrywide supply chain analysis of Germany spanning until 2050 is applied to investigate promising infrastructure development pathways and associated hydrogen distribution costs for each analyzed hydrogen market. Analyzed supply chain pathways include seasonal storage to balance fluctuating renewable power generation with necessary purification as well as trailer- and pipeline-based hydrogen delivery. The analysis encompasses green hydrogen feedstock in the chemical industry and fuel cell-based mobility applications such as local buses non-electrified regional trains material handling vehicles and trucks as well as passenger cars. Our results indicate that the utilization of low-cost long-term storage and improved refueling station utilization have the highest impact during the market introduction phase. We find that public transport and captive fleets offer a cost-efficient countrywide renewable hydrogen supply roll-out option. Furthermore we show that at comparable effective carbon tax resulting from the current energy tax rates in Germany hydrogen is cost-competitive in the transportation sector by the year 2025. Moreover we show that sector-specific CO2 taxes are required to provide a cost-competitive green hydrogen supply in both the transportation and industrial sectors.

Hydrogen safety has become the first consideration especially after fuel cell automobiles were pushed into commercial auto market. Tunnels are important parts of traffic infrastructure featured in confinement or semi-confinement. Hydrogen detonation is a potential accident scenario while hydrogen fuel cell vehicles are operated in a traffic tunnel with a confined space. Pressure shockwaves are mostly produced by hydrogen detonation and propagate along the tunnel. As a designed safety measure water mist injection is hopefully to mitigate the pressure loads of such shocks. To model the interaction between shockwaves and water droplets a droplet breakup model has been developed for the COM3D code which is a highly validated three-dimensional hydrogen explosion simulation code. By using the model the hydrogen detonation shockwave propagation in confined volumes is simulated in the study. The attenuation effects of water mist on the pressure shocks in the simulations are elaborated and discussed based on the simulation results.

The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011 caused by an earthquake and a subsequent tsunami resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation leakage from primary containment boundary to the reactor building improper functioning of standby gas treatment system (SGTS) unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous aqueous and solid materials available for interaction e.g. gas components decontamination paint aerosols and water pools. In the light of the Fukushima accident additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally as more and more passive safety systems such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors identified hydrogen and fission product issues will need to be coupled with the operation of passive safety systems in phenomena oriented and coupled effects experiments. In the present paper potential hydrogen and fission product issues raised by the Fukushima accident are discussed. The discussion focuses on hydrogen and fission product behavior inside nuclear power plant containments under severe accident conditions. The relevant experimental investigations conducted in the technical scale containment THAI (thermal hydraulics hydrogen aerosols and iodine) test facility (9.2 m high 3.2 m in diameter and 60 m3 volume) are discussed in the light of the Fukushima accident.

Using electricity for heating can contribute to decarbonization and provide flexibility to integrate variable renewable energy. We analyze the case of electric storage heaters in German 2030 scenarios with an open-source electricity sector model. We find that flexible electric heaters generally increase the use of generation technologies with low variable costs which are not necessarily renewables. Yet making customary night-time storage heaters temporally more flexible offers only moderate benefits because renewable availability during daytime is limited in the heating season. Respective investment costs accordingly have to be very low in order to realize total system cost benefits. As storage heaters feature only short-term heat storage they also cannot reconcile the seasonal mismatch of heat demand in winter and high renewable availability in summer. Future research should evaluate the benefits of longer-term heat storage.

Greenhouse gas emissions need to be drastically reduced to mitigate the environmental impacts caused by climate change and to lead to a transformation of the European energy system. A model landscape consisting of four final energy consumption sector models with high spatial (NUTS-3) and temporal (hourly) resolution and the multi-energy system model ISAaR is extended and applied to investigate the transformation pathway of the European energy sector in the deep emission mitigation scenario solidEU. The solidEU scenario describes not only the techno-economic but also the socio-political contexts and it includes the EU27 + UK Norway and Switzerland. The scenario analysis shows that volatile renewable energy sources (vRES) dominate the energy system in 2050. In addition the share of flexible sector coupling technologies increases to balance electricity generation from vRES. Seasonal differences are balanced by hydrogen storage with a seasonal storage profile. The deployment rates of vRES in solidEU show that a fast profound energy transition is necessary to achieve European climate protection goals.

As one of the most promising renewable green energies hydrogen power is a popularly accepted option to drive automobiles. Commercial application of fuel cell vehicles has been started since 2015. More and more hydrogen safety concerns have been considered for years. Tunnels are an important part of traffic infrastructure with a mostly confined feature. Hydrogen leak followed possibly by a hydrogen fire is a potential accident scenario which can be triggered trivially by a car accident while hydrogen powered vehicles operate in a tunnel. Water spray is recommended traditionally as a mitigation measure against tunnel fires. The interaction between water spray and hydrogen fire is studied in a way of numerical simulations. By using the computer program of Fire Dynamics Simulator (FDS) tunnel fires of released hydrogen in different scales are simulated coupled with water droplet injections featured in different droplet sizes or varying mass flow rates. The cooling effect of spray on hot gases of hydrogen fires is apparently observed in the simulations. However in some circumstance the turbulence intensified by the water injection can prompt hydrogen combustion which is a negative side-effect of the spray.

Dynamically-operated water electrolyzers enable the production of green hydrogen for cross-sector applications while simultaneously stabilizing power grids. In this study the start-up phase of polymer electrolyte membrane (PEM) water electrolyzers is investigated in the context of intermittent renewable energy sources. During the start-up of the electrolysis system the temperature increases which directly influences hydrogen production efficiency. Experiments on a 100 kWel electrolyzer combined with simulations of electrolyzers with up to 1 MWel were used to analyze the start-up phase and assess its implications for operators and system designers. It is shown that part-load start-up at intermediate cell voltages of 1.80 V yields the highest efficiencies of 74.0 %LHV compared to heat-up using resistive electrical heating elements which reaches maximum efficiencies of 60.9 %LHV. The results further indicate that large-scale electrolyzers with electrical heaters may serve as flexible sinks in electrical grids for durations of up to 15 min.

Background: Naval trafc is highly dependent on depleting fossil resources and causes signifcant greenhouse gas emissions. At the same time marine transportation is a major backbone of world trade. Thus alternative fuel concepts are highly needed. Diferent fuels such as ammonia methanol liquefed natural gas and hydrogen have been proposed. For some of them frst prototype vessels have been in operation. However practical experience is still limited. Most studies so far focus on aspects such as efciency and economics. However particularly in marine applications reliability of propulsion systems is of utmost importance because failures on essential ship components at sea pose a huge safety risk. If the respective components lose their functionality repair can be much more challenging due to large distances to dockyards and the complicated transport of spare parts to the ship. Consequently evaluation of reliability should be a core element of system analysis for new marine fuels. Results: In this study reliability was studied for four potential fuels. The analysis involved several steps: estimation of overall failure rates identifcation of most vulnerable components and assessment of criticality by including severity of fault events. On the level of overall failure rate ammonia is shown to be very promising. Extending the view over a pure failure rate-based evaluation shows that other approaches such as LOHC or methanol can be competitive in terms of reliability and risk. As diferent scenarios require diferent weightings of the diferent reliability criteria the conclusion on the best technology can difer. Relevant aspects for this decision can be the availability of technical staf high-sea or coastal operation the presence of non-naval personnel onboard and other factors. Conclusions: The analysis allowed to compare diferent alternative marine fuel concepts regarding reliability. However the analysis is not limited to assessment of overall failure rates but can also help to identify critical elements that deserve attention to avoid fault events. As a last step severity of the individual failure modes was included. For the example of ammonia it is shown that the decomposition unit and the fuel cell should be subject to measures for increasing safety and reducing failure rates.

The paper presents the first outcomes of the experimental numerical and theoretical studies performed in the funded by Fuel Cell and Hydrogen Joint Undertaking (FCH2 JU) project HyTunnel-CS. The project aims to conduct pre-normative research (PNR) to close relevant knowledge gaps and technological bottlenecks in the provision of safety of hydrogen vehicles in underground transportation systems. Pre normative research performed in the project will ultimately result in three main outputs: harmonised recommendations on response to hydrogen accidents recommendations for inherently safer use of hydrogen vehicles in underground traffic systems and recommendations for RCS. The overall concept behind this project is to use inter-disciplinary and inter-sectoral prenormative research by bringing together theoretical modelling and experimental studies to maximise the impact. The originality of the overall project concept is the consideration of hydrogen vehicle and underground traffic structure as a single system with integrated safety approach. The project strives to develop and offer safety strategies reducing or completely excluding hydrogen-specific risks to drivers passengers public and first responders in case of hydrogen vehicle accidents within the currently available infrastructure.

Hydrogen storage in depleted gas fields is a promising option for the large-scale storage of excess renewable energy. In the framework of the hydrogen storage assessment for the “Underground Sun Storage” project we conduct a multi-step geochemical modelling approach to study fluid–rock interactions by means of equilibrium and kinetic batch simulations. With the equilibrium approach we estimate the long-term consequences of hydrogen storage whereas kinetic models are used to investigate the interactions between hydrogen and the formation on the time scales of typical storage cycles. The kinetic approach suggests that reactions of hydrogen with minerals become only relevant over timescales much longer than the considered storage cycles. The final kinetic model considers both mineral reactions and hydrogen dissolution to be kinetically controlled. Interactions among hydrogen and aqueous-phase components seem to be dominant within the storage-relevant time span. Additionally sensitivity analyses of hydrogen dissolution kinetics which we consider to be the controlling parameter of the overall reaction system were performed. Reliable data on the kinetic rates of mineral dissolution and precipitation reactions specifically in the presence of hydrogen are scarce and often not representative of the studied conditions. These uncertainties in the kinetic rates for minerals such as pyrite and pyrrhotite were investigated and are discussed in the present work. The proposed geochemical workflow provides valuable insight into controlling mechanisms and risk evaluation of hydrogen storage projects and may serve as a guideline for future investigations.

Operators of public electricity grids today are faced with the challenge of integrating increasing numbers of renewable and decentralized energy sources such as wind turbines and photovoltaic power plants into their grids. These sources produce electricity in a very inconstant manner due to the volatility of wind and solar power which further complicates power grid control and management. One key component that is required for modern energy infrastructures is the capacity to store large amounts of energy in an economically feasible way.<br/>One solution that is being discussed in this context is “power-to-gas” i.e. the use of surplus electricity to produce hydrogen (or even methane with an additional methanation process) which is then injected into the public natural gas grid. The huge storage capacity of the gas grid would serve as a buffer offering benefits with regards to sustainability and climate protection while also being cost-effective since the required infrastructure is already in place.<br/>One consequence would be however that the distributed natural gas could contain larger and fluctuating amounts of hydrogen. There is some uncertainty how different gas-fired applications and processes react to these changes. While there have already been several investigations for domestic appliances (generally finding that moderate amounts of H2 do not pose any safety risks which is the primary focus of domestic gas utilization) there are still open questions concerning large-scale industrial gas utilization. Here in addition to operational safety factors like efficiency pollutant emissions (NOX) process stability and of course product quality have to be taken into account.<br/>In a German research project Gas- und Wärme-Institut Essen e. V. (GWI) investigated the impact of higher and fluctuating hydrogen contents (up to 50 vol.-% much higher than what is currently envisioned) on a variety of industrial combustion systems using both numerical and experimental methods. The effects on operational aspects such as combustion behavior flame monitoring and pollutant emissions were analyzed.<br/>Some results of these investigations will be presented in this contribution.

Hydrogen storage is expected to play a crucial role in the comprehensive defossilization of energy systems. In this context the focus is typically on underground hydrogen storage (e.g. in salt caverns). However aboveground storage which is independent of geological conditions and might offer other technical advantages could provide systemic benefits and thereby gain shares in the hydrogen storage market. Against this background this paper examines the market relevance of aboveground compared to underground hydrogen storage. Using the opensource energy system model and optimization framework of Europe PyPSA-Eur the influence of geological independence storage cost relations and technical storage characteristics (i.e. efficiencies) on mentioned market relevance of aboveground hydrogen storage are investigated. Further the expectable market relevance based on current cost projections for the future is assessed. The studies show that in terms of hydrogen capacities aboveground hydrogen storage plays a considerably smaller role compared to underground hydrogen storage. Even when assuming comparatively low aboveground storage cost it will not exceed 1.7% (1.9 TWhH2LHV) of total hydrogen storage capacities in a cost-optimal European energy system. Regarding the amounts of annually stored hydrogen aboveground storage could play a larger role reaching a maximum share of 32.5% (168 TWhH2 LHV a-1) of total stored hydrogen throughout Europe. However these shares are only achievable for low cost storage in particularly suited energy system supply configurations. For higher aboveground storage costs or lower efficiencies shares drop below 10% sharply. The analysis identifies some especially influential factors for achieving higher market relevance. Besides storage costs the demand-orientation of a particular aboveground storage system (e.g. hydrogen storage at demand pressure levels) plays an essential role in market relevance. Further overall efficiency can be a beneficial factor. Still current projections of future techno-economic characteristics show that aboveground hydrogen storage is too expensive or too inefficient compared to underground storage. Therefore to achieve notable market relevance rather drastic cost reductions beyond current expectations would be needed for all assessed aboveground hydrogen storage technologies.

Replacing fossil fuels with energy sources and carriers that are sustainable environmentally benign and affordable is amongst the most pressing challenges for future socio-economic development. To that goal hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting if driven by green electricity would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first principles calculations and machine learning. In addition a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the ‘junctions’ between the field’s physical chemists materials scientists and engineers as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

The Carbon2Chem project aims to convert exhaust gases from the steel industry into chemicals such as methanol to reduce CO2 emissions. Here H2 is required for the conversion of CO2 into methanol. Although much effort is put to produce H2 from renewables the use of fossil fuels especially natural gas seems to be fundamental in the short term. For this reason the development of clean technologies for the processing of natural gas with a low environmental impact has become a topic of utmost importance. In this context methane pyrolysis has received special attention to produce CO2-free H2.

Hydrogen fuel cell vehicles can complement other electric vehicle technologies as a zeroemission technology and contribute to global efforts to achieve the emission reduction targets. This article spotlights the current deployment status of fuel cells in road transport. For this purpose data collection was performed by the Advanced Fuel Cells Technology Collaboration Programme. Moreover the available incentives for purchasing a fuel cell vehicle in different countries were reviewed and future perspectives summarized. Based on the collected information the development trends in the last five years were analyzed and possible further trends that could see the realization of the defined goals derived. The number of registered vehicles was estimated to be 51437 units with South Korea leading the market with 90% of the vehicles being concentrated in four countries. A total of 729 hydrogen refueling stations were in operation with Japan having the highest number of these. The analysis results clearly indicate a very positive development trend for fuel cell vehicles and hydrogen refueling stations in 2021 with the highest number of new vehicles and stations in a single year paralleling the year’s overall economic recovery. Yet a more ambitious ramp-up in the coming years is required to achieve the set targets.

The production of fat steel products is commonly linked to highly integrated sites which include hot metal generation via the blast furnace basic oxygen furnace (BOF) continuous casting and subsequent hot-rolling. In order to reach carbon neutrality a shift away from traditional carbon-based metallurgy is required within the next decades. Direct reduction (DR) plants are capable to support this transition and allow even a stepwise reduction in CO2 emissions. Nevertheless the implementation of these DR plants into integrated metallurgical plants includes various challenges. Besides metallurgy product quality and logistics special attention is given on future energy demand. On the basis of carbon footprint methodology (ISO 14067:2019) diferent scenarios of a stepwise transition are evaluated and values of possible CO2equivalent (CO2eq) reduction are coupled with the demand of hydrogen electricity natural gas and coal. While the traditional blast furnace—BOF route delivers a surplus of electricity in the range of 0.7 MJ/kg hot-rolled coil; this surplus turns into a defcit of about 17 MJ/ kg hot-rolled coil for a hydrogen-based direct reduction with an integrated electric melting unit. On the other hand while the product carbon footprint of the blast furnace-related production route is 2.1 kg CO2eq/kg hot-rolled coil; this footprint can be reduced to 0.76 kg CO2eq/kg hot-rolled coil for the hydrogen-related route provided that the electricity input is from renewable energies. Thereby the direct impact of the processes of the integrated site can even be reduced to 0.15 kg CO2eq/ kg hot-rolled coil. Yet if the electricity input has a carbon footprint of the current German or European electricity grid mix the respective carbon footprint of hot-rolled coil even increases up to 3.0 kg CO2eq/kg hot-rolled coil. This underlines the importance of the availability of renewable energies.

In contrast to sustainable aviation fuels for use in conventional combustion engines hydrogen-electric powertrains constitute a fundamentally novel approach that requires extensive effort from various engineering disciplines. A transient system analysis has been applied to a 500 kW shaft-power-class powertrain. The model was fed with high-level system requirements to gain a fundamental understanding of the interaction between sub-systems and components. Transient effects such as delays in pressure build up heat transfer and valve operation substantially impact the safe and continuous operation of the propulsion system throughout a typical mission profile which is based on the Daher TBM850. The lumped-parameters network solver provides results quickly which are used to derive requirements for subsystems and components which support their in-depth future development. E.g. heat exchanger transfer rates and pressure drop of the motor's novel hydrogen cooling system are established. Furthermore improvements to the system architecture such as a compartmentalization of the tank are identified.

Hydrogen is one of the most promising power sources for meeting the aviation sector’s long-term decarbonization goals. Although on-board hydrogen systems namely fuel cells are extensively researched the maintenance repair and overhaul (MRO) perspective remains mostly unaddressed. This paper analyzes fuel cells from an MRO standpoint based on a literature review and comparison with the automotive sector. It also examines how well the business models and key resources of MRO providers are currently suited to provide future MRO services. It is shown that fuel cells require extensive MRO activities and that these are needed to meet the aviation sector’s requirements for price safety and especially durability. To some extent experience from the automotive sector can be built upon particularly with respect to facility requirements and qualification of personnel. Yet MRO providers’ existing resources only partially allow them to provide these services. MRO providers’ underlying business models must adapt to the implementation of fuel cells in the aviation sector. MRO providers and services should therefore be considered and act as enablers for the introduction of fuel cells in the aviation industry.