Transmission, Distribution & Storage

This paper summarizes a series of the authors’ research in the field of assessing the operational degradation of oil and gas transit pipeline steels. Both mechanical and electrochemical properties of steels are deteriorated after operation as is their resistance to environmentally-assisted cracking. The characteristics of resistance to brittle fracture and stress corrosion cracking decrease most intensively which is associated with a development of in-bulk dissipated microdamages of the material. The most sensitive indicators of changes in the material’s state caused by degradation are impact toughness and fracture toughness by the J-integral method. The degradation degree of pipeline steels can also be evaluated nondestructively based on in-service changes in their polarization resistance and potential of the fracture surface. Attention is drawn to hydrogenation of a pipe wall from inside as a result of the electrochemical interaction of pipe metal with condensed moisture which facilitates operational degradation of steel due to the combined action of operating stresses and hydrogen. The development of microdamages along steel texture was evidenced metallographically as a trend to the selective etching of boundaries between adjacent bands of ferrite and pearlite and fractographically by revealing brittle fracture elements on the fracture surfaces namely delamination and cleavage indicating the sites of cohesion weakening between ferrite and pearlite bands. The state of the X52 steel in its initial state and after use for 30 years was assessed based on the numerical simulation method.

Arup have conducted interviews with targeted industry and government stakeholders to gather data and perspectives to support the development of this study. Arup have also utilised private and publicly available data sources building on recent work undertaken by Geoscience Australia and Deloitte and the comprehensive stakeholder engagement process to inform our research. This study considers the supply chain and infrastructure requirements to support the development of export and domestic hubs. The study aims to provide a succinct “Hydrogen Hubs” report for presentation to the hydrogen working group.



The hydrogen supply chain infrastructure required to produce hydrogen for export and domestic hubs was identified along with feedback from the stakeholder engagement process. These infrastructure requirements can be used to determine the factors for assessing export and domestic hub opportunities. Hydrogen production pathways transportation mechanisms and uses were also further evaluated to identify how hubs can be used to balance supply and demand of hydrogen.



A preliminary list of current or anticipated locations has been developed through desktop research Arup project knowledge and the stakeholder consultation process. Over 30 potential hydrogen export locations have been identified in Australia through desktop research and the stakeholder survey and consultation process. In addition to establishing export hubs the creation of domestic demand hubs will be essential to the development of an Australian hydrogen economy. It is for this reason that a list of criteria has been developed for stakeholders to consider in the siting and design of hydrogen hubs. The key considerations explored are based on demand supply chain infrastructure and investment and policy areas.



Based on these considerations a list of criteria were developed to assess the viability of export and domestic hydrogen hubs. Criteria relevant to assessing the suitability of export and domestic hubs include:

• Health and safety provisions;
• Environmental considerations;
• Economic and social considerations;
• Land availability with appropriate zoning and buffer distances & ownership (new terminals storage solar PV industries etc.);•
• Availability of gas pipeline infrastructure;
• Availability of electricity grid connectivity backup energy supply or co-location of renewables;
• Road & rail infrastructure (site access);
• Community and environmental concerns and weather. Social licence consideration;
• Berths (berthing depth ship storage loading facilities existing LNG and/or petroleum infrastructure etc.);
• Port potential (current capacity & occupancy expandability & scalability);
• Availability of or potential for skilled workers (construction & operation);
• Availability of or potential for water (recycled & desalinated);
• Opportunity for co-location with industrial ammonia production and future industrial opportunities;
• Interest (projects priority ports state development areas politics etc.);
• Shipping distance to target market (Japan & South Korea);
• Availability of demand-based infrastructure (i.e. refuelling stations).

A framework that includes the assessment criteria has been developed to aid decision making rather than recommending specific locations that would be most appropriate for a hub. This is because there are so many dynamic factors that go into selecting a location of a hydrogen hub that it is not appropriate to be overly prescriptive or prevent stakeholders from selecting the best location themselves or from the market making decisions based on its own research and knowledge. The developed framework rather provides information and support to enable these decision-making processes.

Hydrogen is receiving increasing attention as a versatile energy vector to help accelerate the transition to a decarbonised energy future. Gas turbines will continue to play a critical role in providing grid stability and resilience in future low-carbon power systems; however it is recognised that this role is contingent upon achieving increased thermal efficiencies and the ability to operate on carbon-neutral fuels such as hydrogen. An important consideration in the development of gas turbine combustors capable of operating with pure hydrogen or hydrogen-enriched natural gas are the significant changes in thermoacoustic instability characteristics associated with burning these fuels. This article provides a review of the effects of burning hydrogen on combustion dynamics with focus on swirl-stabilised lean-premixed combustors. Experimental and numerical evidence suggests hydrogen can have either a stabilising or destabilising impact on the dynamic state of a combustor through its influence particularly on flame structure and flame position. Other operational considerations such as the effect of elevated pressure and piloting on combustion dynamics as well as recent developments in micromix burner technology for 100% hydrogen combustion have also been discussed. The insights provided in this review will aid the development of instability mitigation strategies for high hydrogen combustion.

Climate change is one of the major problems that people face in this century with fossil fuel combustion engines being huge contributors. Currently the battery powered electric vehicle is considered the predecessor while hydrogen vehicles only have an insignificant market share. To evaluate if this is justified different hydrogen power train technologies are analyzed and compared to the battery powered electric vehicle. Even though most research focuses on the hydrogen fuel cells it is shown that despite the lower efficiency the often-neglected hydrogen combustion engine could be the right solution for transitioning away from fossil fuels. This is mainly due to the lower costs and possibility of the use of existing manufacturing infrastructure. To achieve a similar level of refueling comfort as with the battery powered electric vehicle the economic and technological aspects of the local small-scale hydrogen production are being investigated. Due to the low efficiency and high prices for the required components this domestically produced hydrogen cannot compete with hydrogen produced from fossil fuels on a larger scale

The purpose of this paper is to obtain relevant data on materials that are the most commonly used in fuel-cell and hydrogen technologies. The focus is on polymer-electrolyte-membrane fuel cells solid-oxide fuel cells polymer-electrolyte-membrane water electrolysers and alkaline water electrolysers. An innovative methodological approach was developed for a preliminary material assessment of the four technologies. This methodological approach leads to a more rapid identification of the most influential or critical materials that substantially increase the environmental impact of fuel-cell and hydrogen technologies. The approach also assisted in amassing the life-cycle inventories—the emphasis here is on the solid-oxide fuel-cell technology because it is still in its early development stage and thus has a deficient materials’ database—that were used in a life-cycle assessment for an in-depth material-criticality analysis. All the listed materials—that either are or could potentially be used in these technologies—were analysed to give important information for the fuel-cell and hydrogen industries the recycling industry the hydrogen economy as well as policymakers. The main conclusion from the life-cycle assessment is that the polymer-electrolyte membrane water electrolysers have the highest environmental impacts; lower impacts are seen in polymer-electrolyte-membrane fuel cells and solid-oxide fuel cells while the lowest impacts are observed in alkaline water electrolysers. The results of the material assessment are presented together for all the considered materials but also separately for each observed technology.

A novel Pd/templated carbon catalyst (Pd/TC) was developed characterized and tested in the dehydrogenation of formic acid (FA) under mild conditions with the possibility to control the H₂ generation rate in the absence or presence of HCOONa (SF) by adjusting the Pd:FA and/or FA:SF ratios. The characterization results of the templated carbon obtained by the chemical vapor deposition of acetylene on NaY zeolite revealed different structural and morphological properties compared to other C-based supports. Therefore it was expected to induce a different catalytic behavior for the Pd/TC catalyst. Indeed the TC-supported Pd catalyst exhibited superior activity in the decomposition of FA even at room temperature with turnover frequencies (TOFs) of up to 143.7 and 218.8 h⁻¹ at 60 °C. The H2 generation rate increased with an increasing temperature while the H₂ yield increased with a decreasing FA concentration. Constant generation of gaseous flow (H₂ + CO₂) was achieved for 11 days by the complete dehydrogenation of FA at room temperature using a 2 M FA solution and Pd:FA = 1:2100. The presence of SF in the reaction medium significantly enhanced the H₂ generation rate (535 h⁻¹ for FA:SF = 3:1 and 60 °C).

This study investigated the influence of segregations on hydrogen environment embrittlement (HEE) of AISI 304L type austenitic stainless steels. The microstructure of tensile specimens that were fabricated from commercially available AISI 304L steels and tested by means of small strain-rate tensile tests in air as well as hydrogen gas at room temperature was investigated by means of combined EDS and EBSD measurements. It was shown that two different austenitic stainless steels having the same nominal alloy composition can exhibit different susceptibilities to HEE due to segregation effects resulting from different production routes (continuous casting/electroslag remelting). Local segregation-related variations of the austenite stability were evaluated by thermodynamic and empirical calculations. The alloying element Ni exhibits pronounced segregation bands parallel to the rolling direction of the material which strongly influences the local austenite stability. The latter was revealed by generating and evaluating two-dimensional distribution maps for the austenite stability. The formation of deformation-induced martensite was shown to be restricted to segregation bands with a low Ni content. Furthermore it was shown that the formation of hydrogen induced surface cracks is strongly coupled with the existence of surface regions of low Ni content and accordingly low austenite stability. In addition the growth behavior of hydrogen-induced cracks was linked to the segregation-related local austenite stability.

The objective of this study is to gain a basic understanding of the effect of hydrogen on the fatigue limit. The material was a low-alloy steel modified to be sensitive to hydrogen embrittlement by heat treatment. A statistical fatigue test was carried out using smooth and deep-notched specimens at a loading frequency of 20 Hz. The environment was laboratory air and hydrogen gas. The hydrogen gas pressure was 0.1 MPa in gauge pressure. The fatigue limit of the smooth specimen was higher in the hydrogen gas than that in air although the material showed severe hydrogen embrittlement during the SSRT (Slow Strain Rate Test). The fatigue limit of the deep-notched specimen in the hydrogen gas was the same as that in air. For the smooth specimen the fatigue limit was determined by whether or not a crack was initiated. For the deep-notched specimen the fatigue limit was determined by whether or not a crack propagated. The results can be interpreted as that hydrogen has no significant effect on crack initiation in the high-cycle fatigue regime and affected the threshold of the crack propagation.

The H21 Leeds City Gate project is a study with the aim of determining the feasibility from both a technical and economic viewpoint of converting the existing natural gas network in Leeds one of the largest UK cities to 100% hydrogen. The project has been designed to minimise disruption for existing customers and to deliver heat at the same cost as current natural gas to customers. The project has shown that:

• The gas network has the correct capacity for such a conversion
• It can be converted incrementally with minimal disruption to customers
• Minimal new energy infrastructure will be required compared to alternatives
• The existing heat demand for Leeds can be met via steam methane reforming and salt cavern storage using technology in use around the world today

The project has provided costs for the scheme and has modelled these costs in a regulatory finance model. In addition the availability of low-cost bulk hydrogen in a gas network could revolutionise the potential for hydrogen vehicles and via fuel cells support a decentralised model of combined heat and power and localised power generation.

This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.

In order to reduce anthropogenic global warming governments around the world have decided to reduce CO₂ emissions from fossil fuels dramatically within the next decades. In moderate and cold climates large amounts of fossil fuels are used for space heating and domestic hot water production in winter. Although on an annual base solar energy is available in large quantities in these regions least of the solar resource is available in winter when most of the energy is needed. Therefore solutions are needed to store and transfer renewable energy from summer to winter. In this paper a seasonal energy storage based on the aluminium redox cycle (Al3+→Al→ Al3+) is proposed. For charging electricity from solar or other renewable sources is used to convert aluminium oxide or aluminium hydroxide to elementary aluminium (Al3+→Al). In the discharging process aluminium is oxidized (Al→Al3+) releasing hydrogen heat and aluminium hydroxide or aluminium oxide as a by-product. Hydrogen is used in a fuel cell to produce electricity. Heat produced from the aluminium oxidation process and by the fuel cell is used for domestic hot water production and space heating. The chemical reactions and energy balances are presented and simulation results are shown for a system that covers the entire energy demand for electricity space heating and domestic hot water of a new multi-family building with rooftop photovoltaic energy in combination with the seasonal Al energy storage cycle. It shows that 7–11 kWp of photovoltaic installations and 350–530 kg Al would be needed per apartment for different Swiss climates. Environmental life cycle data shows that the global warming potential and non-renewable primary energy consumption can be reduced significantly compared to today's common practice of heating with natural gas and using electricity from the ENTSO-E network. The presumptive cost were estimated and indicate a possible cost-competitiveness for this system in the near future.