Japan
A Fully Renewable and Efficient Backup Power System with a Hydrogen-biodiesel-fueled IC Engine
Jan 2019
Publication
Renewable energy is free abundant clean and could contribute towards a significant reduction of the global warming emissions. It is massively introduced as a source of electricity production across the globe and is expected to become the primary source of energy within the following decades. However despite the naturally replenished energy the supply is not always available. For this reason it is necessary at times of excess energy any surplus quantity t Read More
Self-acceleration of a Spherically Expanding Hydrogen-air Flame at Elevated Pressure
Sep 2019
Publication
Self-acceleration of a spherically expanding hydrogen-air flame was experimentally investigated in a closed dual-chamber apparatus with the quartz windows enabled to a flame diameter with up to 240 mm. The flame radius and flame speed in lean hydrogen-air mixtures at elevated pressure were evaluated using a high speed Schlieren photography. The experimental results from hydrogen-air explosion at elevated pressure validated the prediction model fo Read More
The Residual Strength of Automotive Hydrogen Cylinders After Exposure to Flames
Sep 2017
Publication
Fuel cell vehicles and some compressed natural gas vehicles are equipped with carbon fiber reinforced plastic (CFRP) composite cylinders. Each of the cylinders has a pressure relief device designed to detect heat and release the internal gas to prevent the cylinder from bursting in a vehicle fire accident. Yet in some accident situations the fire may be extinguished before the pressure relief device is activated leaving the high-pressure fuel gas inside the Read More
Performance Evaluation of the Miniaturized Catalytic Combustion Type Hydrogen Sensor
Oct 2015
Publication
Fast response and high durability hydrogen sensor is required in the safety management of hydrogen station and fuel cell vehicle. We had developed the catalytic combustion type hydrogen sensor in the shape of the miniature beads. It is using the optimized Pd-Pt/Al2O3 catalyst and the Pt micro-heater coil. Both warm-up time and response time of this sensor achieved less than 1 second by downsizing the element to 200μm diameter. Furthermore we Read More
Public Perception on Hydrogen Infrastructure in Japan
Oct 2015
Publication
A public survey was conducted in March 2015 in Japan asking public awareness knowledge perception and acceptance regarding hydrogen hydrogen infrastructure and fuel cell vehicle adopting the same key questions contained in the public surveys conducted six and seven years ago. Changes in answers between two different times of survey implementation were analyzed by comparing results of current survey to those of the previous surveys. Reg Read More
Mechanism of High Pressure Hydrogen Auto-Ignition When Spouting Into Air
Sep 2009
Publication
High pressure hydrogen leak is one of the top safety issues presently. This study elucidates the physics and mechanism of high pressure hydrogen jet ignition when the hydrogen suddenly spouts into the air. The experimental work was done elsewhere while we did the numerical work on this high pressure hydrogen leak problem. The direct numerical simulation based on the compressible fluid dynamics considering viscous effect was carried out with the two-di Read More
Freeze of Nozzle & Receptacle During Hydrogen Fueling
Oct 2015
Publication
We conducted a fuelling test with hydrogen gas for a safety evaluation of the nozzle/receptacle at a controlled temperature and humidity. Test results confirmed that the nozzle/receptacle froze under specific conditions. However freezing did not cause apparatus damage nor hydrogen leakage. The nozzle/receptacle is thus able to fuel safely even if the nozzle/receptacle is stuck due to ice. In addition we quantified the water volume that causes freezing.
TPR-XAFS Study for Hydrogen Recombination Reaction of Platinum Metal Nanoparticle Catalysts
Sep 2017
Publication
Proper management of hydrogen gas is very important for safety of nuclear power plants. Hydrogen removal system by hydrogen recombination reaction (water formation reaction) on a catalyst is one of the candidates for avoiding hydrogen explosion. We have observed in situ and time-resolved structure change of platinum metal nanoparticle catalyst during hydrogen recombination reaction by using simultaneous measurement of temperature-pro Read More
Steam Condensation Effect in Hydrogen Venting from a BWR Reactor Building
Oct 2015
Publication
In the accident of Fukushima Daiichi nuclear power plants hydrogen was accumulated in the reactor buildings and exploded. To prevent such explosions hydrogen venting from reactor buildings is considered. When the gas mixture is released to a reactor building through a reactor containment together with the hydrogen some amount of steam might also be released. The steam condenses if the building atmosphere is below the saturation temperatur Read More
The Possibility of an Accidental Scenario for Marine Transportation of Fuel Cell Vehicle-Hydrogen Releases from TPRD by Radiant Heat From Lower Deck
Oct 2015
Publication
In case fires break out on the lower deck of a car carrier ship or a ferry the fuel cell vehicles (FCVs) parked on the upper deck may be exposed to radiant heat from the lower deck. Assuming that the thermal pressure relief device (TPRD) of an FCV hydrogen cylinder is activated by the radiant heat without the presence of flames hydrogen gas will be released by TPRD to form combustible air-fuel mixtures in the vicinity. To investigate the possibility of this Read More
Outward Propagation Velocity and Acceleration Characteristics in Hydrogen-air Deflagration
Oct 2015
Publication
Propagation characteristics of hydrogen-air deflagration need to be understood for an accurate risk assessment. Especially flame propagation velocity is one of the most important factors. Propagation velocity of outwardly propagating flame has been estimated from burning velocity of a flat flame considering influence of thermal expansion at a flame front; however this conventional method is not enough to estimate an actual propagation velocity beca Read More
Combined Dehydrogenation and Hydrogen-based Power Generation
Jan 2018
Publication
An energy production from the combination of dehydrogenation and combined cycle power generation is proposed. The delivered system is established from three main modules: dehydrogenation combustion and combined cycle. The heat in the system is circulated thoroughly to enhance the energy efficiency due to optimum energy recovery. The Pt/Al2O3 catalyst is applied in the dehydrogenation module due to superior activity to accelerate the dehydroge Read More
Effects of Alloying Elements Addition on Delayed Fracture Properties of Ultra High-Strength TRIP-Aided Martensitic Steels
Dec 2019
Publication
To develop ultra high-strength cold stamping steels for automobile frame parts the effects of alloying elements on hydrogen embrittlement properties of ultra high-strength low alloy transformation induced plasticity (TRIP)-aided steels with a martensite matrix (TM steels) were investigated using the four-point bending test and conventional strain rate tensile test (CSRT). Hydrogen embrittlement properties of the TM steels were improved by the alloying a Read More
Update on Regulation Review for HRS Construction and Operations in Japan
Oct 2015
Publication
In 2005 the Japanese High-pressure Gas Safety Act the Fire Service Act and the Building Standards Act were revised to establish the requirements for 35 MPa hydrogen stations. And in 2012-2014 revisions were made to the High-pressure Gas Safety Act and the Fire Service Act to provide the regulatory requirements for 70 MPa hydrogen stations. We conducted a study on materials that may contribute to prepare technical standards concerning th Read More
A Study on Dispersion Resulting From Liquefied Hydrogen Spilling
Oct 2015
Publication
For massive utilization of hydrogen energy it is necessary to transport a large quantity of hydrogen by liquefied hydrogen carriers. However the current rule on ships carrying liquefied hydrogen in bulks do not address the maritime transport of liquefied hydrogen and the safety assessment of liquefied hydrogen carriage is thus very important. In the present study we spilled liquefied hydrogen and LNG (Liquefied Natural Gas) on the surface of various mate Read More
Monitoring H2 Bubbles by Real Time H2 Sensor
Sep 2017
Publication
Portable H2 sensor was made by using mass spectrometer for the outside monitoring experiment: the leak test the replacement test of gas pipe line the combustion test the explosion experiment the H2 diffusion experiment and the recent issue of the exhaust gas of Fuel Cell Vehicle. In order to check the real time concentration of H2 in various conditions even in the highly humid condition the system volume of the sampling route was minimized with att Read More
Experimental Study on High Pressure Hydrogen Jets Coming Out of Tubes of 0.1–4.2 m in Length
Sep 2011
Publication
Wide use of hydrogen faces significant studies to resolve hydrogen safety issues in industries worldwide. However widely acceptable safety level standards are not achieved in the present situation yet. The present paper deals with hydrogen leaks from a tube to ignite and explode in atmosphere. The experiments using a shock tube are performed to clarify the auto-ignition property of high pressure hydrogen jet spouting from a tube. In order to improve exp Read More
Study of a Post-fire Verification Method for the Activation Status of Hydrogen Cylinder Pressure Relief Devices
Oct 2015
Publication
To safely remove from its fire accident site a hydrogen fuel cell vehicle equipped with a carbon fiber reinforced plastic composite cylinder for compressed hydrogen (CFRP cylinder) and to safely keep the burnt vehicle in a storage facility it is necessary to verify whether the thermally-activated pressure relief device (TPRD) of the CFRP cylinder has already been activated releasing the hydrogen gas from the cylinder. To develop a simple post-fire verifica Read More
Characteristics of Hydrogen Leakage Sound from a Fuel-cell Vehicle by Hearing
Oct 2015
Publication
Fuel-cell vehicle run on hydrogen is known that it has better energy efficiency than existing gasoline cars. The vehicles are designed so that hydrogen leaks from the tank are stopped automatically upon detection of hydrogen leakage or detection of impact in a collision. However we investigated the characteristics of hydrogen leakage sound from a hydrogen-leaking vehicle and the threshold of discrimination of hydrogen leakage from noise at Read More
Numerical Simulation on Low-speed Hydrogen Jet Diffusion
Oct 2015
Publication
The numerical simulation for the hydrogen jet experiments performed by Schefer et al. is conducted using the compressible multicomponent Navier-Stokes equations with the preconditioning method. The simulated results for the hydrogen jet agree with the theoretical results of Tollmien. As far as comparing with the experiments by Schefer et al. the concentration profiles along the radial direction agree with the present numerical results and that along the Read More
No more items...