Publications

Grand Canonical Monte Carlo GCMC simulations are used to study the gravimetric and volumetric hydrogen storage capacities of different carbon nanopores shapes: Slit-shaped nanotubes and torusenes at room temperature 298.15 K and at pressures between 0.1 and 35 MPa and for pore diameter or width between 4 and 15 A. The influence of the pore shape or curvature on the storage capacities as a function of pressure temperature and pore diameter is investigated and analyzed. A large curvature of the pores means in general an increase of the storage capacities of the pores. While torusenes and nanotubes have surfaces with more curvature than the slit-shaped planar pores their capacities are lower than those of the slit-shaped pores according to the present GCMC simulations. Torusene a less studied carbon nanostructure has two radii or curvatures but their storage capacities are similar or lower than those of nanotubes which have only one radius or curvature. The goal is to obtain qualitative and quantitative relationships between the structure of porous materials and the hydrogen storage capacities in particular or especially the relationship between shape and width of the pores and the hydrogen storage capacities of carbon-based porous materials.

Policy led decisions aiming at decarbonizing the economy may well exacerbate existing regional economic imbalances. These effects are seldomly recognised in spatially aggregated top-down and techno-economic decarbonization strategies. Here we present a spatial economic framework that quantifies the gross value added associated with low carbon hydrogen investments while accounting for region-specific factors such as the industrial specialization of regions their relative size and their economic interdependencies. In our case study which uses low carbon hydrogen produced via autothermal reforming combined with carbon capture and storage to decarbonize the energy intensive industries in Europe and in the UK we demonstrate that interregional economic interdependencies drive the overall economic benefits of the decarbonization. Policies intended to concurrently transition to net zero and address existing regional imbalances as in the case of the UK Industrial Decarbonization Challenge should take these local factors into account.

Power to hydrogen (P2H) provides a promising solution to the geographic mismatch between sources of renewable energy and the market due to its technological maturity flexibility and the availability of technical and economic data from a range of active demonstration projects. In this review we aim to provide an overview of the status of P2H analyze its technical barriers and solutions and propose potential opportunities for future research and industrial demonstrations. We specifically focus on the transport of hydrogen via natural gas pipeline networks and end-user purification. Strong evidence shows that an addition of about 10% hydrogen into natural gas pipelines has negligible effects on the pipelines and utilization appliances and may therefore extend the asset value of the pipelines after natural gas is depleted. To obtain pure hydrogen from hydrogen-enriched natural gas (HENG) mixtures end-user separation is inevitable and can be achieved through membranes adsorption and other promising separation technologies. However novel materials with high selectivity and capacity will be the key to the development of industrial processes and an integrated membrane-adsorption process may be considered in order to produce high-purity hydrogen from HENG. It is also worth investigating the feasibility of electrochemical separation (hydrogen pumping) at a large scale and its energy analysis. Cryogenics may only be feasible when liquefied natural gas (LNG) is one of the major products. A range of other technological and operational barriers and opportunities such as water availability byproduct (oxygen) utilization and environmental impacts are also discussed. This review will advance readers’ understanding of P2H and foster the development of the hydrogen economy.

This paper is the first to explore public perceptions about a particular market niche for hydrogen; mobile generators. By utilising a combined research approach including in-situ surveys and online focus groups this paper explores what festival audience members and residents who live near festival sites think about the displacement of incumbent diesel generator technology with hydrogen alternatives. We investigate if hydrogen production methods are important in informing perceptions and subsequent support including the extent to which participants are influenced by the organisation or entity that produces the fuel and stands to profit from its sale. In addition to a primary focus on hydrogen energy we reflect upon how sustainability might be better conceptualised in a festival context. Our findings reveal broad support for hydrogen generators the use of green hydrogen as a fuel to generate electricity and community-led hydrogen production.

The opportunities and challenges to reducing industrial energy demand and carbon dioxide (CO₂ ) emissions in the Chemicals sector are evaluated with a focus on the situation in the United Kingdom (UK) although the lessons learned are applicable across much of the industrialised world. This sector can be characterised as being heterogeneous; embracing a diverse range of products (including advanced materials cleaning fluids composites dyes paints pharmaceuticals plastics and surfactants). It sits on the boundary between energy-intensive (EI) and non-energy-intensive (NEI) industrial sectors. The improvement potential of various technological interventions has been identified in terms of their energy use and greenhouse gas (GHG) emissions. Currently-available best practice technologies (BPTs) will lead to further short-term energy and CO₂ emissions savings in chemicals processing but the prospects for the commercial exploitation of innovative technologies by mid-21st century are far more speculative. A set of industrial decarbonisation ‘technology roadmaps’ out to the mid-21st Century are also reported based on various alternative scenarios. These yield low-carbon transition pathways that represent future projections which match short-term and long-term (2050) targets with specific technological solutions to help meet the key energy saving and decarbonisation goals. The roadmaps’ contents were built up on the basis of the improvement potentials associated with various processes employed in the chemicals industry. They help identify the steps needed to be undertaken by developers policy makers and other stakeholders in order to ensure the decarbonisation of the UK chemicals industry. The attainment of significant falls in carbon emissions over this period will depends critically on the adoption of a small number of key technologies [e.g. carbon capture and storage (CCS) energy efficiency techniques and bioenergy] alongside a decarbonisation of the electricity supply.

The present work addresses the modelling control and simulation of a microgrid integrated wind power system with Doubly Fed Induction Generator (DFIG) using a hybrid energy storage system. In order to improve the quality of the waveforms (voltages and currents) supplied to the grid instead of a two level-inverter the rotor of the DFIG is supplied using a three-level inverter. A new adaptive algorithm based on combined Direct Reactive Power Control (DRPC) and fuzzy logic controls techniques is applied to the proposed topology. In this work two topologies are proposed. In the first one the active power injected into the grid is smoothened by using an economical hybrid battery and supercapacitor energy storage system. However in the second one the excess wind energy is used to produce and store the hydrogen and then a solid oxide fuel cell system (SOFC) is utilized to regenerate electricity by using the stored hydrogen when there is not enough wind energy. To avoid overcharging deep discharging of batteries to mitigate fluctuations due to wind speed variations and to fulfil the requirement of the load profile a power management algorithm is implemented. This algorithm ensures smooth output power in the first topology and service continuity in the second. The modelling and simulation results are presented and analysed using Matlab/Simulin.

The time-range of applicability of various energy-storage technologies are limited by self-discharge and other inevitable losses. While batteries and hydrogen are useful for storage in a time-span ranging from hours to several days or even weeks for seasonal or multi-seasonal storage only some traditional and quite costly methods can be used (like pumped-storage plants Compressed Air Energy Storage or energy tower). In this paper we aim to show that while the efficiency of energy recovery of Power-to-Methane technology is lower than for several other methods due to the low self-discharge and negligible standby losses it can be a suitable and cost-effective solution for seasonal and multi-seasonal energy storage.

Green synthesis of crystalline porous materials for energy-related applications is of great significance but very challenging. Here we create a green strategy to fabricate a highly crystalline olefin-linked pyrazine-based covalent organic framework (COF) with high robustness and porosity under solvent-free conditions. The abundant nitrogen sites high hydrophilicity and well-defined one-dimensional nanochannels make the resulting COF an ideal platform to confine and stabilize the H₃PO₄ network in the pores through hydrogen-bonding interactions. The resulting material exhibits low activation energy (E_a) of 0.06 eV and ultrahigh proton conductivity across a wide relative humidity (10–90 %) and temperature range (25–80 °C). A realistic proton exchange membrane fuel cell using the olefin-linked COF as the solid electrolyte achieve a maximum power of 135 mW cm⁻² and a current density of 676 mA cm⁻² which exceeds all reported COF materials.

Low-carbon hydrogen has the potential to play a significant role in tackling climate change and poor air quality. This policy briefing considers how hydrogen could be produced at a useful scale to power vehicles heat homes and supply industrial processes.

Four groups of hydrogen production technologies are examined:

Thermochemical Routes to Hydrogen

These methods typically use heat and fossil fuels. Steam methane reforming is the dominant commercial technology and currently produces hydrogen on a large scale but is not currently low carbon. Carbon capture is therefore essential with this process. Innovative technology developments may also help and research is underway. Alternative thermal methods of creating hydrogen indicate biomass gasification has potential. Other techniques at a low technology readiness level include separation of hydrogen from hydrocarbons using microwaves.

Electrolytic Routes to Hydrogen

Electrolytic hydrogen production also known as electrolysis splits water into hydrogen and oxygen using electricity in an electrolysis cell. Electrolysis produces pure hydrogen which is ideal for low temperature fuel cells for example in electric vehicles. Commercial electrolysers are on the market and have been in use for many years. Further technology developments will enable new generation electrolysers to be commercially competitive when used at scale with fluctuating renewable energy sources.

Biological Routes to Hydrogen

Biological routes usually involve the conversion of biomass to hydrogen and other valuable end products using microbial processes. Methods such as anaerobic digestion are feasible now at a laboratory and small pilot scale. This technology may prove to have additional or greater impact and value as route for the production of high value chemicals within a biorefinery concept.

Solar to Fuels Routes to Hydrogen

A number of experimental techniques have been reported the most developed of which is ‘solar to fuels’ - a suite of technologies that typically split water into hydrogen and oxygen using solar energy. These methods have close parallels with the process of photosynthesis and are often referred to as ‘artificial photosynthesis’ processes. The research is promising though views are divided on its ultimate utility. Competition for space will always limit the scale up of solar to fuels.

The briefing concludes that steam methane reforming and electrolysis are the most likely technologies to be deployed to produce low-carbon hydrogen at volume in the near to mid-term providing that the challenges of high levels of carbon capture (for steam methane reforming) and cost reduction and renewable energy sources (for electrolysis) can be overcome.

Hydrogen energy with environment amicable renewable efficiency and cost-effective advantages is the future mainstream substitution of fossil-based fuel. However the extremely low volumetric density gives rise to the main challenge in hydrogen storage and therefore exploring effective storage techniques is key hurdles that need to be crossed to accomplish the sustainable hydrogen economy. Hydrogen physically or chemically stored into nanomaterials in the solid-state is a desirable prospect for effective large-scale hydrogen storage which has exhibited great potentials for applications in both reversible onboard storage and regenerable off-board storage applications. Its attractive points include safe compact light reversibility and efficiently produce sufficient pure hydrogen fuel under the mild condition. This review comprehensively gathers the state-of-art solid-state hydrogen storage technologies using nanostructured materials involving nanoporous carbon materials metal-organic frameworks covalent organic frameworks porous aromatic frameworks nanoporous organic polymers and nanoscale hydrides. It describes significant advances achieved so far and main barriers need to be surmounted to approach practical applications as well as offers a perspective for sustainable energy research.