- Home
- A-Z Publications
- Publications
Publications
Design of Long-Life Wireless Near-Field Hydrogen Gas Sensor
Sep 2023
Publication
A wireless near-field hydrogen gas sensor is proposed which detects the leaking hydrogen near its source to achieve fast response and high reliability. The proposed sensor can detect leaking hydrogen in 100ms with nearly no delay due to hydrogen diffusion in space. The overall response time is shortened by orders of magnitude compared to conventional sensors according to simulation results. Over 1 year of maintenance interval is empowered by wireless design based on Bluetooth low energy protocol.
Integration of Different Storage Technologies towards Sustainable Development—A Case Study in a Greek Island
Mar 2024
Publication
The necessity for transitioning to renewable energy sources and the intermittent nature of the natural variables lead to the integration of storage units into these projects. In this research paper wind turbines and solar modules are combined with pumped hydro storage batteries and green hydrogen. Energy management strategies are described for five different scenarios of hybrid renewable energy systems based on single or hybrid storage technologies. The motivation is driven by grid stability issues and the limited access to fresh water in the Greek islands. A RES-based desalination unit is introduced into the hybrid system for access to low-cost fresh water. The comparison of single and hybrid storage methods the exploitation of seawater for the simultaneous fulfillment of water for domestic and agricultural purposes and the evaluation of different energy economic and environmental indices are the innovative aspects of this research work. The results show that pumped hydro storage systems can cover the energy and water demand at the minimum possible price 0.215 EUR/kWh and 1.257 EUR/m3 while hybrid storage technologies provide better results in the loss of load probability payback period and CO2 emissions. For the pumped hydro– hydrogen hybrid storage system these values are 21.40% 10.87 years and 2297 tn/year respectively.
CFD Analysis of Hydrogen Leakage from a Small Hole in a Sloping Roof Hydrogen Refueling Station
Sep 2023
Publication
As a key link in the application of hydrogen energy hydrogen refueling stations are significant for their safe operation. This paper established a three-dimensional 1:1 model for a seaport hydrogen refueling station in Ningbo City. In this work the CFD software FLUENT was used to study the influence of leakage angles on the leakage of high-pressure hydrogen through a small hole. Considering the calculation accuracy and efficiency this paper adopted the pseudo-diameter model. When the obstacle was far from the leakage hole it had almost no obstructive effect on the jet's main body. Still it affected the hydrogen whose momentum in the outer layer of the jet has been significantly decayed. In this condition there would be more hydrogen in stagnation. Thus the volume of the flammable hydrogen cloud was hardly affected while there was a significant increase in the volume of the hazardous hydrogen cloud. When the obstacle was close to the leakage hole it directly affected the jet's main body. Therefore the volume of the flammable hydrogen cloud increased. However the air impeded the hydrogen jet relatively less because the hydrogen jet contacted the obstacle more quickly. The hydrogen jet blocked by the obstacle still has some momentum. Therefore there was no more hydrogen in stagnation and no significant increase in the volume of the hazardous hydrogen cloud.
Potential Cost Savings of Large-scale Blue Hydrogen Production via Sorption-enhanced Steam Reforming Process
Jan 2024
Publication
As countries work towards achieving net-zero emissions the need for cleaner fuels has become increasingly urgent. Hydrogen produced from fossil fuels with carbon capture and storage (blue hydrogen) has the potential to play a significant role in the transition to a low-carbon economy. This study examined the technical and economic potential of blue hydrogen produced at 600 MWth(LHV) and scaled up to 1000 MWth(LHV) by benchmarking sorption-enhanced steam reforming process against steam methane reforming (SMR) autothermal gasheated reforming (ATR-GHR) integrated with carbon capture and storage (CCS) and SMR with CCS. Aspen Plus® was used to develop the process model which was validated using literature data. Cost sensitivity analyses were also performed on two key indicators: levelised cost of hydrogen and CO2 avoidance cost by varying natural gas price electricity price CO2 transport and storage cost and carbon price. Results indicate that at a carbon price of 83 £/tCO2e the LCOH for SE-SR of methane is the lowest at 2.85 £/kgH2 which is 12.58% and 22.55% lower than that of ATR-GHR with CCS and SMR plant with CCS respectively. The LCOH of ATR-GHR with CCS and SMR plant with CCS was estimated to be 3.26 and 3.68 £/kgH2 respectively. The CO2 avoidance cost was also observed to be lowest for SE-SR followed by ATR-GHR with CCS then SMR plant with CCS and was observed to reduce as the plant scaled to 1000 MWth(LHV) for these technologies.
Elevating the Prospects of Green Hydrogen (H2) Production Through Solar-powered Water Splitting Devices: A Systematic Review
May 2024
Publication
As the commercialisation of two contrasting solar-powered water splitting devices with lower TRLs of proton exchange membrane (PEM) electrolyser systems and photoelectrochemical (PEC) systems gains momentum the path towards a sustainable H2 economy is taking shape. Ongoing pilot projects and demonstration plants are proving the feasibility and potential of these technologies in real-world applications. However to ensure their success we must confront the critical challenges of cost reduction and efficiency enhancement making green H2 economically competitive with traditional production methods. To achieve this a collaborative effort among academia industry and policymakers is paramount. This comprehensive review begins by examining traditional water electrolysis methods focusing on the production of green H2 through electrochemical splitting. It delves into crucial components and advancements in the PEM systems addressing challenges related to catalysts membranes gas diffusion layers and bipolar plates. The review also explores solar-driven PEC water splitting emphasizing the significance of efficient photoelectrodes and reactor design. Additionally it discusses the integration of photovoltaic cells with electrochemical or PEC systems for higher H2 yield. Commercialisation is underway and this endeavour necessitates a collaborative approach with active involvement from academia industry and policymakers. This collective effort not only propels us towards greener and more sustainable energy solutions but also represents a transformative step in the global journey towards a sustainable and environmentally conscious economy.
Review on the Thermal Neutrality of Application-orientated Liquid Organic Hydrogen Carrier for Hydrogen Energy Storage and Delivery
Aug 2023
Publication
The depletion and overuse of fossil fuels present formidable challenge to energy supply system and environment. The human society is in great need of clean renewable and sustainable energy which can guarantee the long-term utilization without leading to escalation of greenhouse effect. Hydrogen as an extraordinary secondary energy is capable of realizing the target of environmental protection and transferring the intermittent primary energy to the application terminal while its nature of low volumetric energy density and volatility need suitable storage method and proper carrier. In this context liquid organic hydrogen carrier (LOHC) among a series of storage methods such as compressed and liquefied hydrogen provokes a considerable amount of research interest since it is proven to be a suitable carrier for hydrogen with safety and stability. However the dehydrogenation of hydrogen-rich LOHC materials is an endothermic process and needs large energy consumption which hampers the scale up of the LOHC system. The heat issue is thus essential to be addressed for fulfilling the potential of LOHC. In this work several strategies of heat intensification and management for LOHC system including the microwave irradiation circulation of exhaust heat and direct LOHC fuel cell are summarized and analyzed to provide suggestions and directions for future research.
Thermodynamic Modelling and Optimisation of a Green Hydrogen-blended Syngas-fueled Integrated PV-SOFC System
Sep 2023
Publication
Developing an effective energy transition roadmap is crucial in the face of global commitments to achieve net zero emissions. While renewable power generation systems are expanding challenges such as curtailments and grid constraints can lead to energy loss. To address this surplus electricity can be converted into green hydrogen serving as a key component in the energy transition. This research explores the use of renewable solar energy for powering a proton exchange membrane electrolyser to produce green hydrogen while a downdraft gasifier fed by municipal solid waste generates hydrogen-enriched syngas. The blended fuel is then used to feed a Solid Oxide Fuel Cell (SOFC) system. The study investigates the impact of hydrogen content on the performance of the fuel cell-based power plant from thermodynamics and exergoeconomic perspectives. Multiobjective optimisation using a genetic algorithm identifies optimal operating conditions for the system. Results show that blending hydrogen with syngas increases combined heat and power efficiency by up to 3% but also raises remarkably the unit product cost and reduces carbon dioxide emissions. Therefore the optimal values for hydrogen content current density temperatures and other parameters are determined. These findings contribute to the design and operation of an efficient and sustainable energy generation system.
Optimal Hydrogen Infrastructure Planning for Heat Decarbonisation
Feb 2024
Publication
Energy decarbonisation is essential to achieve Net-Zero emissions goal by 2050. Consequently investments in alternative low-carbon pathways and energy carriers for the heat sector are required. In this study we propose an optimisation framework for the transition of heat sector in Great Britain focusing on hydrogen infrastructure decisions. A spatially-explicit mixed-integer linear programming (MILP) evolution model is developed to minimise the total system’s cost considering investment and operational decisions. The optimisation framework incorporates both long-term planning horizon of 5-year steps from 2035 to 2050 and typical days with hourly resolution. Aiming to alleviate the computational effort of such multiscale model two hierarchical solution approaches are suggested that result in computational time reduction. From the optimisation results it is shown that the installation of gas reforming hydrogen production technologies with CCS and biomass gasification with CCS can provide a cost-effective strategy achieving decarbonisation goal. What-if analysis is conducted to demonstrate further insights for future hydrogen infrastructure investments. Results indicate that as cost is highly dependent on natural gas price Water Electrolysis capacity increases significantly when gas price rises. Moreover the introduction of carbon tax policy can lead to lower CO2 net emissions.
Deep Low-Carbon Economic Optimization Using CCUS and Two-Stage P2G with Multiple Hydrogen Utilizations for an Integrated Energy System with a High Penetration Level of Renewables
Jul 2024
Publication
Integrating carbon capture and storage (CCS) technology into an integrated energy system (IES) can reduce its carbon emissions and enhance its low-carbon performance. However the full CCS of flue gas displays a strong coupling between lean and rich liquor as carbon dioxide liquid absorbents. Its integration into IESs with a high penetration level of renewables results in insufficient flexibility and renewable curtailment. In addition integrating split-flow CCS of flue gas facilitates a short capture time giving priority to renewable energy. To address these limitations this paper develops a carbon capture utilization and storage (CCUS) method into which storage tanks for lean and rich liquor and a two-stage power-to-gas (P2G) system with multiple utilizations of hydrogen including a fuel cell and a hydrogen-blended CHP unit are introduced. The CCUS is integrated into an IES to build an electricity–heat–hydrogen–gas IES. Accordingly a deep low-carbon economic optimization strategy for this IES which considers stepwise carbon trading coal consumption renewable curtailment penalties and gas purchasing costs is proposed. The effects of CCUS the twostage P2G system and stepwise carbon trading on the performance of this IES are analyzed through a case-comparative analysis. The results show that the proposed method allows for a significant reduction in both carbon emissions and total operational costs. It outperforms the IES without CCUS with an 8.8% cost reduction and a 70.11% reduction in carbon emissions. Compared to the IES integrating full CCS the proposed method yields reductions of 6.5% in costs and 24.7% in emissions. Furthermore the addition of a two-stage P2G system with multiple utilizations of hydrogen further amplifies these benefits cutting costs by 13.97% and emissions by 12.32%. In addition integrating CCUS into IESs enables the full consumption of renewables and expands hydrogen utilization and the renewable consumption proportion in IESs can reach 69.23%.
A Bibliometric Study on the Research Trends and Hotspots of Proton Exchange Membrane Electrolyzer
Jan 2024
Publication
The application of hydrogen energy produced by proton exchange membrane electrolyzer (PEMEC) is conducive to the solution of the greenhouse effect and the energy crisis. In order to understand the development trends and research hotspot of PEMEC in recent years a total of 1874 research articles related to this field from 2003 to 2023 were obtained from the Web of Science Core Collection (WoS CC) database. The visualization software VOSviewer is used for bibliometric analysis and the research progress hotspots and trends in the PEMEC field are summarized. It was found that in the past two decades literature in the PEMEC field has shown a trend of stable increase at first and then rapidly increasing. And it is in a stage of rapid growth after 2021.Renewable Energy previously published research articles related to PEMEC with the highest frequency of citations. There are a total of 6128 researchers in this field but core authors only account for 4.5% of the total. Although China entered this field later than the United States and Canada it has the largest number of research articles. The research results provide a comprehensive overview of various aspects in the PEMEC field which is beneficial for researchers to grasp the development hotspots of PEMEC.
Sustainability Certification for Renewable Hydrogen: An International Survey of Energy Professionals
Jun 2024
Publication
Hydrogen produced from renewable energy is being promoted to decarbonise global energy systems. To support this energy transition standards certification and labelling schemes (SCLs) aim to differentiate hydrogen products based on their system-wide carbon emissions and method of production characteristics. However being certified as low-carbon clean or green hydrogen does not guarantee broader sustainability across economic environmental social or governance dimensions. Through an international survey of energy-sector and sustainability professionals (n = 179) we investigated the desirable sustainability features for renewable hydrogen SCLs and the perceived advantages and disadvantages of sustainability certification. Our mixed-method study revealed general accordance on the feasible inclusion of diverse sustainability criteria in SCLs albeit with varying degrees of perceived essentiality. Within the confines of the data some differences in viewpoints emerged based on respondents’ geographical and supply chain locations which were associated with the sharing of costs and benefits. Qualitatively respondents found the idea of SCL harmonisation attractive but weighed this against the risks of duplication complicated administrative procedures and contradictory regulation. The implications of this research centre on the need for further studies to inform policy recommendations for an overarching SCL sustainability framework that embodies the principles of harmonisation in the context of multistakeholder governance.
A Review of Electrolyzer-based Systems Providing Grid Ancillary Service: Current Status, Market, Challenges and Future Directions
Feb 2024
Publication
Concerns related to climate change have shifted global attention towards advanced sustainable and decarbonized energy systems. While renewable resources such as wind and solar energy offer environmentally friendly alternatives their inherent variability and intermittency present significant challenges to grid stability and reliability. The integration of renewable energy sources requires innovative solutions to effectively balance supply and demand in the electricity grid. This review explores the critical role of electrolyzer systems in addressing these challenges by providing ancillary services to modern electricity grids. Electrolyzers traditionally used only for hydrogen production have now emerged as versatile tools capable of responding quickly to grid load variations. They can consume electricity during excess periods or when integrated with fuel cells generate electricity during peak demand contributing to grid stability. Therefore electrolyzer systems can fulfill the dual function of producing hydrogen for the end-user and offering grid balancing services ensuring greater economic feasibility. This review paper aims to provide a comprehensive view of the electrolyzer systems’ role in the provision of ancillary services including frequency control voltage control congestion management and black start. The technical aspects market projects challenges and future prospects of using electrolyzers to provide ancillary services in modern energy systems are explored.
Environmental Assessment of Replacing Fossil Fuels with Hydrogen for Motorised Equipment in the Mining Sector
Nov 2023
Publication
To achieve the European milestone of climate neutrality by 2050 the decarbonisation of energy-intensive industries is essential. In 2022 global energy-related CO2 emissions increased by 0.9% or 321 Mt reaching a peak of over 36.8 Gt. A large amount of these emissions is the result of fossil fuel usage in the motorised equipment used in mining. Heavy diesel vehicles like excavators wheel loaders and dozers are responsible for an estimated annual CO2 emissions of 400 Mt of CO2 accounting for approximately 1.1% of global CO2 emissions. In addition exhaust gases of CO2 and NOx endanger the personnel’s health in all mining operations especially in underground environments. To tackle these environmental concerns and enhance environmental health extractive industries are focusing on replacing fossil fuels with alternative fuels of low or zero CO2 emissions. In mining the International Council on Mining and Metals has committed to achieving net zero emissions by 2050 or earlier. Of the various alternative fuels hydrogen (H2 ) has seen a considerable rise in popularity in recent years as H2 combustion accounts for zero CO2 emissions due to the lack of carbon in the burning process. When combusted with pure oxygen it also accounts for zero NOx formation and near-zero emissions overall. To this end this study aims to examine the overall environmental performance of H2 -powered motorised equipment compared to conventional fossil fuel-powered equipment through Life Cycle Assessment. The assessment was conducted using the commercial software Sphera LCA for Experts following the conventionally used framework established by ISO 14040:2006 and 14044:2006/A1:2018 and the International Life Cycle Data Handbook consisting of (1) the goal and scope definition (2) the Life Cycle Inventory (LCI) preparation (3) the Life Cycle Impact Assessment (LCIA) and (4) the interpretation of the results. The results will offer an overview to support decision-makers in the sector.
The Development of a Green Hydrogen Economy: Review
Jun 2024
Publication
Building a hydrogen economy is perceived as a way to achieve the decarbonization goals set out in the Paris Agreement to limit global warming as well as to meet the goals resulting from the European Green Deal for the decarbonization of Europe. This article presents a literature review of various aspects of this economy. The full added value chain of hydrogen was analyzed from its production through to storage transport distribution and use in various economic sectors. The current state of knowledge about hydrogen is presented with particular emphasis on its features that may determine the positives and negatives of its development. It was noted that although hydrogen has been known for many years its production methods are mainly related to fossil fuels which result in greenhouse gas emissions. The area of interest of modern science is limited to green hydrogen produced as a result of electrolysis from electricity produced from renewable energy sources. The development of a clean hydrogen economy is limited by many factors the most important of which are the excessive costs of producing clean hydrogen. Research and development on all elements of the hydrogen production and use chain is necessary to contribute to increasing the scale of production and use of this raw material and thus reducing costs as a result of the efficiencies of scale and experience gained. The development of the hydrogen economy will be related to the development of the hydrogen trade and the centers of this trade will differ significantly from the current centers of energy carrier trade.
Research on the Technical Scheme of Multi-stack Common Rail Fuel Cell Engine Based on the Demand of Commercial Vehicle
Feb 2024
Publication
At present most fuel cell engines are single-stack systems and high-power single-stack systems have bottlenecks in meeting the power requirements of heavy-duty trucks mainly because the increase in the single active area and the excessive number of cells will lead to poor distribution uniformity of water gas and heat in the stack which will cause local attenuation and reduce the performance of the stack. This paper introduces the design concept of internal combustion engine takes three-stack fuel cell engine as an example designs multi-stack fuel cell system scheme and serialized high-voltage scheme. Through Intelligent control technology of independent hydrogen injection based on multi-stack coupling the hydrogen injection inflow of each stack is controlled online according to the real-time anode pressure to achieve accurate fuel injection of a single stack and ensure the consistency between multiple stacks. proves the performance advantage of multi-stack fuel cell engine through theoretical designintelligent control and test verification and focuses on analyzing the key technical problems that may exist in multi-stack consistency. The research results provide a reference for the design of multi-stack fuel cell engines and have important reference value for the powertrain design of long-distance heavy-duty and high-power fuel cell trucks.
Renewable Hydrogen Requirements and Impacts for Network Balancing: A Queensland Cae Study
Dec 2023
Publication
Hydrogen is the gas of the moment: an abundant element that can be created using renewable energy transported in gaseous or liquid form and offering the ability to provide energy with only water vapour as an emission. Hydrogen can also be used in a fuel blend in electricity generation gas turbines providing a low carbon option for providing the peak electricity to cover high demand and firming.<br/>While the electricity grid is itself transforming to decarbonising hard-to-abate industries such as cement and bauxite refineries are slower to reduce emissions constrained by their high temperature process requirements. Hydrogen offers a solution allowing onsite production process heat with waste heat recovery supporting blended gas turbine generation for onsite electricity supply.<br/>This article builds on decarbonisation pathway simulation results from an ANEM model of the electricity grid identifying the amount of peak demand energy required from gas turbines. The research then examines the quantity flow rate storage requirements and emissions reduction if this peak generation were supplied by open cycle hydrogen capable gas turbines.
Assessment of Energy Footprint of Pure Hydrogen-Supplied Vehicles in Real Conditions of Long-Term Operation
Jul 2024
Publication
The desire to maintain CO2 concentrations in the global atmosphere implies the need to introduce ’new’ energy carriers for transport applications. Therefore the operational consumption of each such potential medium in the ’natural’ exploitation of vehicles must be assessed. A useful assessment method may be the vehicle’s energy footprint resulting from the theory of cumulative fuel consumption presented in the article. Using a (very modest) database of long-term use of hydrogen-powered cars the usefulness of this method was demonstrated. Knowing the energy footprint of vehicles of a given brand and type and the statistical characteristics of the footprint elements it is also possible to assess vehicle fleets in terms of energy demand. The database on the use of energy carriers such as hydrogen in the long-term operation of passenger vehicles is still relatively modest; however as it has been shown valuable data can be obtained to assess the energy demand of vehicles of a given brand and type. Access to a larger operational database will allow for wider use of the presented method.
Thermal Design of a System for Mobile Powersupply
Sep 2023
Publication
Ever more stringent emission regulations for vehicles encourage increasing numbers of battery electric vehicles on the roads. A drawback of storing electric energy in a battery is the comparable low energy density low driving range and the higher propensity to deplete the energy storage before reaching the destination especially at low ambient temperatures. When the battery is depleted stranded vehicles can either be towed or recharged with a mobile recharging station. Several technologies of mobile recharging stations already exist however most of them use fossil fuels to recharge battery electric vehicles. The proposed novel zero emission solution for mobile charging is a combined high voltage battery and hydrogen fuel cell charging station. Due to the thermal characteristics of the fuel cell and high voltage battery (which allow only comparable low coolant temperatures) the thermal design for this specific application (available heat exchanger area zero vehicle speed air flow direction) becomes challenging and is addressed in this work. Experimental methods were used to obtain reliable thermal and electric power measurement data of a 30 kW fuel cell system which is used in the Mobile Hydrogen Powersupply. Subsequently simulation methods were applied for the thermal design and optimisation of the coolant circuits and heat exchangers. It is shown that an battery electric vehicle charging power of 22 kW requires a heat exchanger area of 1 m2 of which 60 % is used by the fuel cell heat exchanger and the remainder by the battery heat exchanger to achieve steady state operation at the highest possible ambient temperature of 436 °C. Furthermore the simulation showed that when the charging power of 22 kW is solely provided by the high voltage battery the highest possible ambient temperature is 42 °C. When the charging power is decreased operation up to the maximum ambient temperatures of 45 °C can be achieved. The results of maximum charging power and limiting ambient temperature give insights for further system improvements which are: sizing of fuel cell or battery trailer design and heat exchanger area operation strategy of the system (power split between high voltage battery and fuel cell) as well as possible dynamic operation scenarios.
Techno-economic Analysis of Green-H2@Scale Production
Sep 2023
Publication
The International Energy Agency (IEA) established the "H2 Implementing Agreement (HIA)" to promote H2 transition in various economic sectors. Today less than one percent of the world's H2 production is “Green”. Lack of regulations high production costs and inadequate infrastructure are significant impediments. The U.S. Department of Energy set a "111-target" which translates into $1/kg-H2 in the next decade. Many countries in the Middle East and North Africa (MENA) region have announced ambitious plans to produce green H2. Through techno-economic metrics and the impact of economies of scale this study investigates H2@Scale production. H2 Production Analysis and the System Advisor Model developed by the U.S. Department of Energy were used for analysis. The results demonstrate a significant decrease in the levelized cost of H2 (LCOH) when the production volume is scaled up. It was determined that the key cost drivers are capital cost energy installed balance of the plant and mechanical and electrical subsystems. The studied location is found promising for scaled production and developing its commodity status. The findings could serve as a benchmark for key stakeholders investors policymakers and the developer of relevant strategies in the infrastructure and H2 value chain.
Mid-century Net-zero Emissions Pathways for Japan: Potential Roles of Global Mitigation Scenarios in Informing National Decarbonisation Strategies
Jan 2024
Publication
Japan has formulated a net-zero emissions target by 2050. Existing scenarios consistent with this target generally depend on carbon dioxide removal (CDR). In addition to domestic mitigation actions the import of low-carbon energy carriers such as hydrogen and synfuels and negative emissions credits are alternative options for achieving net-zero emissions in Japan. Although the potential and costs of these actions depend on global energy system transition characteristics which can potentially be informed by the global integrated assessment models they are not considered in current national scenario assessments. This study explores diverse options for achieving Japan's net-zero emissions target by 2050 using a national energy system model informed by international energy trade and emission credits costs estimated with a global energy system model. We found that demand-side electrification and approximately 100 Mt-CO2 per year of CDR implementation equivalent to approximately 10% of the current national CO2 emissions are essential across all net-zero emissions scenarios. Upscaling of domestically generated hydrogen-based alternative fuels and energy demand reduction can avoid further reliance on CDR. While imports of hydrogen-based energy carriers and emission credits are effective options annual import costs exceed the current cost of fossil fuel imports. In addition import dependency reaches approximately 50% in the scenario relying on hydrogen imports. This study highlights the importance of considering global trade when developing national net-zero emissions scenarios and describes potential new roles for global models.
No more items...