Publications

This work compares the costs of three electrolysis-based hydrogen supply systems for heavy road transportation: a decentralized off-grid system for hydrogen production from wind and solar power (Dec-Sa); a decentralized system connected to the electricity grid (Dec-Gc); and a centralized grid-connected electrolyzer with hydrogen transported to refueling stations (Cen-Gc). A cost-minimizing optimization model was developed in which the hydrogen production is designed to meet the demand at refueling stations at the lowest total cost for two timeframes: one with current electricity prices and one with estimated future prices. The results show that: For most of the studied geographical regions Dec-Gc gives the lowest costs of hydrogen delivery (2.2e3.3V/kgH2) while Dec-Sa entails higher hydrogen production costs (2.5e6.7V/kgH2). In addition the centralized system (Cen-Gc) involves lower costs for production and storage than the grid-connected decentralized system (Dec-Gc) although the additional costs for hydrogen transport increase the total cost (3.5e4.8V/kgH2).

Hydrogen energy is considered one of the main measures of zero carbonization in energy systems but high equipment and hydrogen costs hinder the development of hydrogen energy technology. The objectives of this study are to quantify the environmental advantages of hydrogen energy through a carbon tax and study the application potential of hydrogen energy technology in a regional distributed energy system (RDES). In this study various building types in the smart community covered by Japan’s first hydrogen energy pipeline are used as an example. First ten buildings of five types are selected as the research objectives. Subsequently two comparative system models of a regional distributed hydrogen energy system (RDHES) and an RDES were established. Then by studying the optimal RDHES and RDES configuration and combining the prediction of future downward trends of fuel cell (FC) costs and energy carbon emissions the application effect of FC and hydrogen storage (HS) technologies on the demand side was analyzed. Finally the adaptability of the demand-side hydrogen energy system was studied by analyzing the load characteristics of different types of buildings. The results show that when the FC price is reduced to 1.5 times that of the internal combustion engine (ICE) the existing carbon tax system can sufficiently support the RDHES in gaining economic advantages in some regions. Notably when the carbon emissions of the urban energy system are reduced the RDHES demonstrates stronger anti-risk ability and has greater suitability for promotion in museums and shopping malls. The conclusions obtained in this study provide quantitative support for hydrogen energy promotion policies on the regional demand side and serve as a theoretical reference for the design and adaptability research of RDHESs.

The lack of hydrogen (H2) transportation infrastructure restricts the development of the H2 industry. Owing to the high investment of building specific facilities using existing natural gas (NG) pipelines to transport a blend of H2 and NG (H2NG) is a viable means of transportation and approach for large-scale long-time storage. However variation in the thermo-physical properties of an H2NG blend will impact the performance of pipeline appliances. To address the gaps in H2 transmission via an NG system in the context of energy consumption in the present paper a one-dimensional pipeline model is proposed to predict the blended flow in a real existing pipeline (Shan–Jing I China). The data of NG components were derived from real gas fields. Furthermore the influence of H2 fractions on pipeline energy coefficient and the layout of pressurization stations are comprehensively analyzed. In addition the case of intermediate gas injection is investigated and the effects of injection positions are studied. This study serves as a useful reference for the design of an H2NG pipeline system. The present study reveals that with the increasing in H2 fraction the distance between pressure stations increases. Furthermore when the arrangement of original pressure stations is maintained overpressure occur. Intermediate gas injection results in the inlet pressure of subsequent pressurization stations reducing. Using existing pipeline network to transport H2NG it is necessary to make appropriate adjustment.

In this podcast David Ledesma talks with Rahmat Poudineh and Martin Palovic about their paper on integrating hydrogen into the European energy transfer infrastructure landscape. As hydrogen is expected to play an important role in European plans towards climate neutrality adequate hydrogen transport (and storage) infrastructure needs to be established. However hydrogen transport infrastructures are costly and have a long lead time. Furthermore hydrogen can be transported via a variety of means: it can be transported as a gas via pipelines or liquid via road rail and sea or even converted to derivatives such as ammonia or methanol for long distance transportation. It is also possible to transfer electrical energy instead of hydrogen and produce hydrogen in a decentralized way. From a system perspective all these infrastructures represent elements of a grand hydrogen ‘polygrid’ that will be the backbone of the future decarbonized energy system. This raises the fundamental question of how to prevent inefficiency and infrastructure redundancy across different modes of hydrogen transport. The task is made more challenging by technological uncertainty the unpredictability of future supply and demand for hydrogen network externality effects and investment irreversibility of grid-based infrastructures. In this podcast we discuss three possible coordination approaches to optimise future cross-sectoral investment into hydrogen transport infrastructure and highlight their strengths and shortcomings.

The podcast can be found on their website.

Green hydrogen produced by water electrolysis with renewable energy plays a crucial role in the revolution towards energy sustainability and it is considered a key source of clean energy and efficient storage. Its ability to address the intermittency of renewable sources and its potential to decarbonize sectors that are difficult to electrify make it a strategic component in climate change mitigation. By using a method based on a bibliometric review of scientific publications this paper represents a significant contribution to the emerging field of research on green hydrogen and provides a detailed review of electrolyzer technologies identifying key areas for future research and technology development. The results reflect the immaturity of a technology which advances with different technical advancements waiting to find the optimal technical solution that allows for its massive implementation as a source of green hydrogen generation. According to the results found in this article alkaline (ALK) and proton exchange membrane (PEM) electrolyzers seem to be the ones that interest the scientific community the most. Similarly in terms of regional analysis Europe is clearly committed to green hydrogen in view of the analysis of its scientific results on materials and electrolyzer capacity forecasts for 2030.

In this study we developed a new hybrid mathematical model that combines wind-speed range with the log law to derive the wind energy potential for wind-generated hydrogen production in Pakistan. In addition we electrolyzed wind-generated power in order to assess the generation capacity of wind-generated renewable hydrogen. The advantage of the Weibull model is that it more accurately reflects power generation potential (i.e. the capacity factor). When applied to selected sites we have found commercially viable hydrogen production capacity in all locations. All sites considered had the potential to produce an excess amount of wind-generated renewable hydrogen. If the total national capacity of wind-generated was used Pakistan could conceivably produce 51917000.39 kg per day of renewable hydrogen. Based on our results we suggest that cars and other forms of transport could be fueled with hydrogen to conserve oil and gas resources which can reduce the energy shortfall and contribute to the fight against climate change and global warming. Also hydrogen could be used to supplement urban energy needs (e.g. for Sindh province Pakistan) again reducing energy shortage effects and supporting green city programs.

Our Future Energy Scenarios (FES) outline four different credible pathways for the future of energy over the next 30 years. Based on input from over 600 experts the report looks at the energy needed in Britain across electricity and gas - examining where it could come from how it needs to change and what this means for consumers society and the energy system itself.

This report illustrates what a reliable resilient decarbonised electricity supply system could look like in 2035 and the steps required to achieve it. It provides new insights and new advice on how such a system can be achieved by 2035 using real weather data and hourly analysis of Great Britain’s power system (Northern Ireland is part of the all-Ireland system). It also looks at the implications for hydrogen.

At present hydrogen is considered as one of the most promising motor fuels capable of replacing traditional hydrocarbons. This article presents the results of a comprehensive experimental study of the effect of hydrogen additives on the main parameters of a gasoline spark-ignition ICE. The thermophysical parameters of the processes of ignition and combustion inside the cylinder with the addition of hydrogen in the amount of 0%–20% of the air volume as well as the fuel and energy characteristics of the engine and its impact on the environment were studied. It has been established that hydrogen leads to significant changes in the engine operation. It increases some parameters and reduces others improving or worsening them compared to running on pure gasoline. So with a 20% H2 addition at an average engine load the following parameters increase: the maximum pressure in the cylinder by almost 20%; the rate of pressure increase in the combustion chamber by 2.8 times; the highest combustion temperature by 140 K. At the same time the following parameters decrease: average indicator pressure by 18%; ignition timing by 82% (6◦ to TDC versus 34◦ for gasoline); crank angle corresponding to the maximum pressure by 32% (9.4◦ versus 13.9◦ for gasoline); crank angle corresponding to maximum temperature by 54% (17.7◦ after TDC versus 38.3◦ for clean gasoline); ignition delay time (τind = 0.32 ms) and visible combustion time (τvis = 1.58 ms) by 4 and 2.3 times respectively.

To reduce greenhouse gas emissions from natural gas use utilities are investigating the potential of adding hydrogen to their distribution grids. This will reduce the carbon dioxide emissions from grid-connected engines used for stationary power generation and it may also impact their power output and efficiency. Promisingly hydrogen and natural gas mixtures have shown encouraging results regarding engine power output pollutant emissions and thermal efficiency in well-controlled on-road vehicle applications. This work investigates the effects of adding hydrogen to the natural gas fuel for a lean-burn spark-ignited four-stroke 8.9 liter eight-cylinder naturally aspirated engine used in a commercial stationary power generation application via an engine model developed in the GT-SUITETM modelling environment. The model was validated for fuel consumption air flow and exhaust temperature at two operating modes. The focus of the work was to assess the sensitivity of the engine’s power output brake thermal efficiency and pollutant emissions to blends of methane with 0–30% (by volume) hydrogen. Without adjusting for the change in fuel energy the engine power output dropped by approximately 23% when methane was mixed with 30% by volume hydrogen. It was found that increasing the fueling rate to maintain a constant equivalence ratio prevented this drop in power and reduced carbon dioxide emissions by almost 4.5%. In addition optimizing the spark timing could partially offset the increases in in-cylinder burned and unburned gas temperatures and in-cylinder pressures that resulted from the faster combustion rates when hydrogen was added to the natural gas. Understanding the effect of fuel change in existing systems can provide insight on utilizing hydrogen and natural gas mixtures as the primary fuel without the need for major changes in the engine.