Publications

HyCARE project supported by the Clean Hydrogen Partnership of the European Union deals with a prototype of hydrogen storage tank using a solid-state hydrogen carrier. Up to 40 kilograms of hydrogen are stored in twelve tanks at less than 50 barg and less than 100 °C. The innovative design is based on a standard twenty-foot container including twelve TiFe-based metal hydride (MH) hydrogen storage tanks coupled with a thermal energy storage in phase change materials (PCM). This article aims at showing the main risks related to hydrogen storage in a MH system and the safety barriers considered based on HyCARE’s specific risk analysis.<br/>Regarding the TiFe MH material used to store hydrogen experimental tests showed that the exposure of the MH to air or water did not cause spontaneous ignition. Furthermore an explosion within the solid MH cannot propagate due to internal pore size. Additionally in case of leakage the speed of hydrogen desorption from the MH is self-limited which is an important safety characteristic since it reduces the potential consequences from the hydrogen release scenario.<br/>Regarding the integrated system the critical scenarios identified during the risk analysis were: explosion due to release of hydrogen inside or outside the container internal explosion inside MH tanks due to accidental mix of hydrogen and air and asphyxiation due to inert gas accumulation in the container. This identification phase of the risk analysis allowed to pinpoint the most relevant safety barriers already in place and recommend additional ones if needed to further reduce the risk that were later implemented.<br/>The main safety barriers identified were: material and component selection (including the MH selected) safety interlocks safety valves ventilation gas detection and safety distances.<br/>The risk management process based on risk identification and assessment contributed to coherently integrate inherently safe design features and safety barriers.

The increase of using hydrogen as a replacement for fossil fuels in power generation and mobility is expected to witness a huge leap in the next decades. However several safety issues arise due to the physical and chemical properties of hydrogen especially its wide range of flammability. In case of Hydrogen leakage in confined areas Hydrogen clouds can accumulate in the space and their concentration can build up quickly to reach the lower flammability limit (LFL) in case of not applying a proper ventilation system. As a part of the Living Lab Energy Campus (LLEC) project at Jülich Research Centre the use of hydrogen mixed with natural gas as a fuel for the central heating system of the campus is being studied. The current research aims to investigate the release dispersion and formation and the spread of a hydrogen cloud inside the central utility building at the campus of Jülich Research Centre in case of hypothetical accidental leakage. Such a leakage is simulated using the opensource containmentFoam package base on OpenFOAM CFD code to numerically simulate the behavior of the air-hydrogen mixture. The critical locations where hydrogen concentrations can reach the LFL values are shown.

Hydrogen energy represents a crucial pathway towards achieving carbon neutrality and is a pivotal facet of future strategic emerging industries. The safe and efficient transportation of hydrogen is a key link in the entire chain development of the hydrogen energy industry’s “production storage and transportation”. Mixing hydrogen into natural gas pipelines for transportation is the potential best way to achieve large-scale long-distance safe and efficient hydrogen transportation. Welds are identified as the vulnerable points in natural gas pipelines and compatibility between hydrogen-doped natural gas and existing pipeline welds is a critical technical challenge that affects the global-scale transportation of hydrogen energy. Therefore this article systematically discusses the construction and weld characteristics of hydrogen-doped natural gas pipelines the research status of hydrogen damage mechanism and mechanical property strengthening methods of hydrogen-doped natural gas pipeline welds and points out the future development direction of hydrogen damage mechanism research in hydrogen-doped natural gas pipeline welds. The research results show that: 1 Currently there is a need for comprehensive research on the degradation of mechanical properties in welds made from typical pipe materials on a global scale. It is imperative to systematically elucidate the mechanism of mechanical property degradation due to conventional and hydrogeninduced damage in welds of high-pressure hydrogen-doped natural gas pipelines worldwide. 2 The deterioration of mechanical properties in welds of hydrogen-doped natural gas pipelines is influenced by various components including hydrogen carbon dioxide and nitrogen. It is necessary to reveal the mechanism of mechanical property deterioration of pipeline welds under the joint participation of multiple damage mechanisms under multi-component gas conditions. 3 Establishing a fundamental database of mechanical properties for typical pipeline steel materials under hydrogen-doped natural gas conditions globally is imperative to form a method for strengthening the mechanical properties of typical high-pressure hydrogen-doped natural gas pipeline welds. 4 It is essential to promptly develop relevant standards for hydrogen blending transportation welding technology as well as weld evaluation testing and repair procedures for natural gas pipelines.

The escalating global demand for goods transport via shipping has heightened energy consumption impacting worldwide health and the environment. To mitigate this international organizations aim to achieve complete fuel desulphurization and decarbonization by 50% by 2050. Investigating eco-friendly fuels is crucial particularly those with a reduced carbon and zero sulfur content. Methanol derived mainly from renewable sources and produced by carbon dioxide’s hydrogenation method stands out as an effective solution for GHG reduction. Leveraging its favorable properties global scalability and compatibility with the existing infrastructure especially LNGs methanol proves to be a cost-efficient and minimally disruptive alternative. This review explores methanol’s role as a hybrid maritime fuel emphasizing its ecological production methods advantages and challenges in the shipping industry’s green transition. It discusses the environmental impacts of methanol use and analyzes economic factors positioning methanol not only as an ecofriendly option but also as a financially prudent choice for global shipping. Methanol is efficient and cost-effective and excels over MGO especially in new ships. It is economically advantageous with decreasing investment costs compared to LNG while providing flexibility without specialized pressure tanks. Global marine fuel trends prioritize fuel traits accessibility and environmental considerations incorporating factors like policies emissions bunkering and engine adaptability during transitions.

"The Oxford Institute for Energy Studies started researching the role of hydrogen in the energy transition in 2020.  Since then the interest in hydrogen has continued to grow globally across the energy industry. A key research question has been the extent to which clean hydrogen can be scaled up at reasonable cost and whether it can play a significant role in the global energy system. In April 2022 OIES launched a new Hydrogen Research Programme under the overarching theme of ’building business cases for a hydrogen economy’. This overarching theme was selected based on the observation that most clean hydrogen developments to date had been relatively small-scale pilot or demonstration projects typically funded by government grants or subsidies. For clean hydrogen to play a significant role there will need to be business cases developed in order to attract the many hundreds of billions of dollars of investment required  most of which will need to come from the private sector albeit ultimately underpinned by government-backed decarbonisation policies.  Just over a year has passed since the start of the Hydrogen Research Programme and the intention of this paper is to pull together key themes which have emerged from the research so far and which can form a useful framework for further research both by OIES and others.<br/>The six key themes in this paper listed below are intended to create a framework to at least start to address the challenges:<br/>Hydrogen is in competition with other decarbonisation alternatives.<br/>The business case for clean hydrogen relies on government policy to drive decarbonisation.<br/>It is essential to understand emissions associated with potential hydrogen investments.<br/>Hydrogen investments need to consider the full value chain and its geopolitics.<br/>Transport of hydrogen is expensive and so should be minimised.<br/>Storage of hydrogen is an essential part of the value chain and requires more focus.

This research proposes designing and implementing a system to produce hydrogen utilizing the thermal energy from the exhaust gases in a natural gas engine. For the construction of the system a thermoelectric generator was used to convert the thermal energy from the exhaust gases into electrical power and an electrolyzer bank to produce hydrogen. The system was evaluated using a natural gas engine which operated at a constant speed (2400 rpm) and six load conditions (20 % 40 % 60 % 80 % and 100 %). The effect of hydrogen on the engine was evaluated with fuel mixtures (NG + 10 % HEF and NG + 15 % HEF). The results demonstrate that the NG + 10 % HEF and NG + 15 % HEF mixtures allow for a decrease of 1.84 % and 2.33 % in BSFC and an increase of 1.88 % and 2.38 % in BTE. Through the NG + 15 % HEF mixture the engine achieved an energy efficiency of 34.15 % and an exergetic efficiency of 32.84 %. Additionally the NG + 15 % HEF mixture reduces annual CO CO2 and HC emissions by 9.52 % 15.48 % and 13.39 % respectively. The addition of hydrogen positively impacts the engine’s economic cost allowing for a decrease of 1.56 % in the cost of useful work and a reduction of 3.32 % in the cost of exergy loss. In general the proposed system for hydrogen production represents an alternative for utilizing the residual energy from exhaust gases resulting in better performance parameters reduced annual pollutant emissions and lower economic costs.

The world’s economy heavily depends on the energy resources used by various countries. India is one of the promising developing nations with very low crude reserves actively looking for new renewable energy resources to power its economy. Higher energy consumption and environmental pollution are two big global challenges for our sustainable development. The world is currently facing a dual problem of an energy crisis as well as environmental degradation. So there is a strong need to reduce our dependency on fossil fuels and greenhouse gas emissions. This can be achieved to a great extent by universally adopting clean fuels for all daily life uses like ethanol or liquified natural gas (LNG) as these burn very clean and do not emit many pollutants. Nowadays green hydrogen has emerged as a new clean energy source which is abundantly available and does not pollute much. This article explores the various benefits of green hydrogen with respect to fossil fuels various techniques of producing it and its possible use in different sectors such as industry transport and aviation as well as in day-to-day life. Finally it explores the use of green hydrogen as fuel in automobile engines its blending with CNG gas and its benefits in reducing emissions compared to fossil fuels. On combustion green hydrogen produces only water vapours and is thus a highly clean fuel. Thus it can potentially help humanity preserve the environment due to its ultra-low emissions and can be a consistent and reliable source of energy for generations to come thereby ending the clean energy security debate forever.

Hydrogen uptake and embrittlement characteristics of a cold-drawn austenitic stainless steel wire were investigated. Slow strain rate testing and fracture surface analysis were applied to determine the hydrogen embrittlement resistance providing an apparent decrease in resistance to hydrogen embrittlement for a 50% degree of cold deformation. The hydrogen content was assessed by thermal desorption and laser-induced breakdown spectroscopy establishing a correlation between the total absorbed hydrogen and the intensity of near-surface hydrogen. The sub-surface hydrogen content of the hot-rolled specimen was determined to be 791 wt.ppm.

This study proposes a predictive equivalent consumption minimization strategy (P-ECMS) that utilizes velocity prediction and considers various dynamic constraints to mitigate fuel cell degradation assessed using a dedicated sub-model. The objective is to reduce fuel consumption in real-world conditions without prior knowledge of the driving mission. The P-ECMS incorporates a velocity prediction layer into the Energy Management System. Comparative evaluations with a conventional adaptive-ECMS (A-ECMS) a standard ECMS with a well-tuned constant equivalence factor and a rule-based strategy (RBS) are conducted across two driving cycles and three fuel cell dynamic restrictions (|∕| ≤ 0.1 0.01 and 0.001 A∕cm2 ). The proposed strategy achieves H2 consumption reductions ranging from 1.4% to 3.0% compared to A-ECMS and fuel consumption reductions of up to 6.1% when compared to RBS. Increasing dynamic limitations lead to increased H2 consumption and durability by up to 200% for all tested strategies.

All diesel-only trains in the UK will be phased out by 2040. Hydrogen and ammonia emerge as alternative zerocarbon fuel for greener railway. Solid Oxide Fuel Cells (SOFCs) provide an alternative prime mover option which efficiently convert zero-carbon fuels into electricity without emitting nitrogen oxides (NOx) unlike traditional engines. Superior to Proton Exchange Membrane Fuel Cells (PEMFCs) in efficiency SOFCs fulfil MW-scale power needs and can use ammonia directly. This study investigates innovative strategies for integrating SOFCs into hybrid rail powertrains using hydrogen or ammonia. Utilizing an optimization framework incorporating Particle Swarm Optimization (PSO) the study aims to minimize operational costs while considering capital and replacement expenditures powertrain performance and component sizing. The findings suggest that hybrid powertrains based on ammonia-fueled SOFCs may potentially reduce costs by 30% compared to their hydrogen counterparts albeit requiring additional space for engine compartments. Ammonia-fueled SOFCs trains also exhibit a 5% higher efficiency at End-of-Life (EoL) showing less performance degradation than those powered by hydrogen. The State of Charge (SoC) of the batteries in range of 30–70% for both cases is identified as most costeffective.