United Kingdom
SGN Project Report - Flame Visibility Risk Assessment
Feb 2021
Publication
This report contains information on the relative risks of natural gas and hydrogen fires particularly regarding their visibility. The fires considered are those that could occur on the H100 Fife trial network. The H100 Fife project will connect a number of residential houses to 100% hydrogen gas supply. The project includes hydrogen production storage and a new distribution network. From a review of large and small-scale tests and incidents it is concluded that hydrogen flames are likely to be clearly visible for releases above 2 bar particularly for larger release rates. At lower pressures hydrogen flame visibility will be affected by ambient lighting background colour and release orientation although this is also the case for natural gas. Potential safety implications from lack of flame visibility are that SGN workers other utility workers or members of the public could inadvertently come into contact with an ignited release. However some releases would be detected through noise thrown soil or interaction with objects. From a workshop and review of risk reduction measures and analysis of historical interference damage incidents it is concluded that flames with the potential for reduced visibility are adequately controlled. This is due to the likelihood of such scenarios occurring being low and that the consequences of coming into contact with such a flame are unlikely to be severe. These conclusions are supported by cost-benefit analysis that shows that no additional risk mitigation measures are justified for the H100 project. It is recommended that the cost-benefit analysis is revisited before applying the approach to a network wider than the H100 project. It was observed that the addition of odorant at relevant concentrations did not have an effect on the visibility of hydrogen flames.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
This report and any attachment is freely available on the ENA Smarter Networks Portal here. IGEM Members can download the report and any attachment directly by clicking on the pdf icon above.
The Decarbonisation of Heat
Mar 2020
Publication
This paper proposes that whilst the exact pathway to decarbonising heat in the UK is not yet clear there are a range of actions that could be taken in the next ten years to shift heat onto the right route to meet our 2050 net zero obligation. We already possess many of the skills and technologies required but there are a number of significant barriers preventing a spontaneous movement towards low carbon heat on the scale required – a starting impulse is needed.<br/><br/>Energy efficiency and low carbon heating have the potential to radically improve the quality of life of not just the poorest in our society but all residents of the United Kingdom. With the right approach the decarbonisation of heat can improve health outcomes for millions create new jobs in manufacturing and construction reduce air pollution in our cities and reduce the burden on our health service. This in addition to leading the world in mitigating the climate emergency.
Net Zero Review: Interim Report
Dec 2020
Publication
Climate change is an existential threat to humanity. Without global action to limit greenhouse gas emissions the climate will change catastrophically with almost unimaginable consequences for societies across the world. In recognition of the risks to the UK and other countries the UK became in 2019 the first major economy to implement a legally binding net zero target.<br/>The UK has made significant progress in decarbonising its economy but needs to go much further to achieve net zero. This will be a collective effort requiring changes from households businesses and government. It will require substantial investment and significant changes to how people live their lives.<br/>This transformation will also create opportunities for the UK economy. New industries and jobs will emerge as existing sectors decarbonise or give way to lowcarbon equivalents. The Ten Point Plan for a Green Industrial Revolution and Energy White Paper start to set out how the UK can make the most of these opportunities with new investment in sectors like offshore wind and hydrogen.1 The transition will also have distributional and competitiveness impacts that the government will need to consider as it designs policy.<br/>This interim report sets out the analysis so far from the Treasury’s Net Zero Review and seeks feedback on the approach ahead of the final report due to be published next year.
HyNet North West- from Vision to Reality
Jan 2018
Publication
HyNet North West (NW) is an innovative integrated low carbon hydrogen production distribution and carbon capture utilisation and storage (CCUS) project. It provides hydrogen distribution and CCUS infrastructure across Liverpool Manchester and parts of Cheshire in support of the Government’s Clean Growth Strategy (CGS) and achievement of the UK’s emissions reduction targets.<br/>Hydrogen will be produced from natural gas and sent via a new pipeline to a range of industrial sites for injection as a blend into the existing natural gas network and for use as a transport fuel. Resulting carbon dioxide (CO2) will be captured and together with CO2 from local industry which is already available sent by pipeline for storage offshore in the nearby Liverpool Bay gas fields. Key data for the Project are presented in Table ES1.
Assessment of Full Life-cycle Air Emissions of Alternative Shipping Fuels
Oct 2017
Publication
There is a need for alternative fuels in the shipping sector for two main motivations: to deliver a reduction in local pollutants and comply with existing regulation; and to mitigate climate change and cut greenhouse gas emissions. However any alternative fuel must meet a range of criteria to become a viable option. Key among them is the requirement that it can deliver emissions reductions over its full life-cycle. For a set of fuels comprising both conventional and alternative fuels together with associated production pathways this paper presents a life-cycle assessment with respect to six emissions species: local pollutants sulphur oxides nitrogen oxides and particulate matter; and greenhouse gases carbon dioxide methane and nitrous oxide. While the analysis demonstrates that no widely available fuel exists currently to deliver on both motivations some alternative fuel options have the potential if key barriers can be overcome. Hydrogen or other synthetic fuels rely on decarbonisation of both energy input to production and other feedstock materials to deliver reductions in greenhouse gas emissions. Similarly bio-derived fuels can be an abatement option but only if it can be ensured that land-use change whilst growing biomass does not impact wider potential savings and the sector is able to compete sufficiently for their use. These examples show that crucial barriers are located upstream in the respective fuel life-cycle and that the way to overcome them may reside beyond the scope of the shipping sector alone.
Carbon Capture and Storage Could Clear a Path to the UK's Carbon Reduction Targets: An ETI Technology Programme Highlight Report
Sep 2014
Publication
Capturing and sealing away carbon dioxide released from industrial processes and electricity generation is acknowledged internationally to be potentially a winning intervention in the battle against climate change. The collected technologies that make up Carbon Capture and Storage (CCS) could remove more than 90% of the carbon emissions from energy intensive industries and electricity production. In power generation CCS not only provides low-carbon output but it also preserves capacity in fossil fuel-fired plant to respond to shifts in demand. This is a near-unique combination that could mitigate the different shortcomings of harnessing the wind the sun or nuclear fission.<br/>CCS could clear a path to the UK’s carbon reduction targets; secure its energy supplies; and reduce the cost of those achievements. With CCS in play a low-carbon future with secure energy supplies becomes affordable. However without our research has found that the costs of meeting the UK’s lowcarbon targets could double to £60bn a year by 2050 at today’s prices.<br/>However CCS has to be honed technically and commercially before it can become a reality. ETI supported by its partners has made important progress and continues to do so.
Non-adiabatic Under-expanded Jet Theory for Blowdown and Fire Resistance Rating of Hydrogen Tank
Sep 2019
Publication
The European Regulations on type-approval of hydrogen vehicles require thermally-activated pressure relief device (TPRD) to be installed on hydrogen onboard storage tanks to release its content in a fire event to prevent its catastrophic rupture. The aim of this study is to develop a model for design of an inherently safer system TPRD-storage tank. Parameters of tank materials and hydrogen external heat flux from the fire to the tank wall TPRD diameter time to initiate TPRD are input parameters of the model. The energy conservation equation and real gas equation of state are employed to describe the dynamic behaviour of the system. The under-expanded jet theory developed previously for adiabatic release from a storage tank is applied here to non-adiabatic blowdown of a tank in a fire. Unsteady heat transfer equation is used to calculate heat conduction through the tank wall. It includes the decomposition of the wall material due to high heat flux. The convective heat transfer between tank wall and hydrogen is modelled through the dimensionless Nusselt number correlations. The model is validated against two types of experiments i.e. realistic (non-adiabatic) blowdown of high-pressure storage tank and failure of a tank without TPRD in a fire. The model is confirmed to be time efficient for computations and accurately predicts the dynamic pressure and temperature of the gas inside the tank temperature profile within the tank wall time to tank rupture in a fire and the blowdown time.
Secure, Affordable, Low Carbon: Gas in our Future Energy System
Feb 2020
Publication
Our gas network is one of the best developed in the world providing safe secure affordable energy to homes and businesses across the UK.<br/><br/>To meet the biggest energy challenge of our generation – making deep cuts to carbon emissions by 2050 – it needs to embrace new technology which builds on these strengths and delivers the integrated flexible network of the future. This briefing sets out how it is already doing that. Take a look at our Gas Futures Messages booklet attached.
Potential Development of Renewable Hydrogen Imports to European Markets until 2030
Mar 2022
Publication
This paper considers potential import routes for low-carbon and renewable hydrogen (H2) to main European markets like Germany. In particular it analyses claims made by Hydrogen Europe and subsequently picked up by the European Commission in its Hydrogen Strategy that there will be 40GW of electrolyser capacity in nearby countries providing hydrogen imports to Europe by 2030. The analysis shows that by 2030 potential demand for H2 could be high enough to initiate some limited international hydrogen trade most likely between European countries initially rather than from outside Europe. Geographically a northern hydrogen cluster around Netherlands and NW Germany will be more significant for hydrogen demand while southern Europe is more likely to have surplus low cost renewable power generation. The paper considers potential H2 exporters to Europe including Ukraine and North African countries (in line with the proposal from Hydrogen Europe) as well as Norway and Russia. (The research pre-dates recent political and military tensions between Russia and Ukraine which are likely to influence future development pathways). The supply cost of hydrogen in 2030 is predicted to be in a reasonably (and perhaps surprisingly) narrow band around €3/kg from various sources and supply chains. The paper concludes that overall while imports of hydrogen to Europe are certainly possible in the longer term there are many challenges to be addressed. This conclusion supports the growing consensus that development of low carbon hydrogen certainly within Europe is likely to start within relatively local hydrogen clusters with some limited bilateral trade.
The research paper can be found on their website
The research paper can be found on their website
Business Energy and Industrial Strategy Committee Inquiry into Decarbonising Heat in Homes
Dec 2020
Publication
The Hydrogen Taskforce welcomes the opportunity to submit evidence to the Business Energy and Industrial Strategy Committee’s inquiry into decarbonising heat in homes. It is the Taskforce’s view that:
In March 2020 the Taskforce has defined a set of policy recommendations for Government which are designed to ensure that hydrogen can scale to meet the future demands of a net zero energy system: • Development of a cross departmental UK Hydrogen Strategy within UK Government;• Commit £1bn of capex funding over the next spending review period to hydrogen production storage and distribution projects;• Develop a financial support scheme for the production of hydrogen in blending industry power and transport.• Amend Gas Safety Management Regulations (GSMR) to enable hydrogen blending and take the next steps towards 100% hydrogen heating through supporting public trials and mandating 100% hydrogen-ready boilers by 2025; and• Commit to the support of 100 Hydrogen Refuelling Stations (HRS) by 2025 to support the rollout of hydrogen transport.
You can download the whole document from the Hydrogen Taskforce website here
- Decarbonising heat is one of the biggest challenges that the UK faces in meeting Net Zero and several solutions will be required;
- Hydrogen can play a valuable role in reducing the cost of decarbonising heat. Its high energy density enables it to be stored cost effectively at scale providing system resilience;
- Hydrogen heating can be implemented at minimal disruption to the consumer;
- The UK holds world-class advantages in hydrogen production distribution and application; and
- Other economies are moving ahead in the development of this sector and the UK must respond.
In March 2020 the Taskforce has defined a set of policy recommendations for Government which are designed to ensure that hydrogen can scale to meet the future demands of a net zero energy system: • Development of a cross departmental UK Hydrogen Strategy within UK Government;• Commit £1bn of capex funding over the next spending review period to hydrogen production storage and distribution projects;• Develop a financial support scheme for the production of hydrogen in blending industry power and transport.• Amend Gas Safety Management Regulations (GSMR) to enable hydrogen blending and take the next steps towards 100% hydrogen heating through supporting public trials and mandating 100% hydrogen-ready boilers by 2025; and• Commit to the support of 100 Hydrogen Refuelling Stations (HRS) by 2025 to support the rollout of hydrogen transport.
You can download the whole document from the Hydrogen Taskforce website here
Transport Pathway to Hydrogen webinar
Mar 2021
Publication
Webinar to accompany the launch of the Cadent Future Role of Gas in Transport report which can be found here
Reducing Emissions in Scotland 2020 Progress Report to the Scottish Parliament
Oct 2020
Publication
Outline
This is the eighth annual Progress Report to the Scottish Parliament required by Scottish Ministers under the Climate Change (Scotland) Act 2009. It assesses Scotland’s progress in achieving its legislated targets to reduce greenhouse gas emissions
Overall greenhouse gas emissions reduced by 3% in 2017 compared to a 10% fall in 2016. The fall was again led by the power sector due in large part to Scotland’s first full year of coal-free electricity generation. Recent performance in other sectors shows only incremental improvement at best and unless emissions reductions are delivered economy-wide Scotland is at risk of missing its new interim target of a 56% reduction in emissions by 2020.
Key findings
Setting a net-zero greenhouse gas emissions target for 2045 represents a step-change in ambition for Scotland.
The Scottish Parliament’s 2030 target to reduce emissions by 75% will be extremely challenging to meet. It must be backed up by steps to drive meaningful emissions reductions immediately.
Scotland’s Programme for Government 2019-20 alongside other recent policies sent a clear signal that the Scottish Government is taking its more ambitious targets seriously but there is much more to do.
Scotland’s ability to deliver its net-zero target is contingent on action taken in the UK and vice versa.
This is the eighth annual Progress Report to the Scottish Parliament required by Scottish Ministers under the Climate Change (Scotland) Act 2009. It assesses Scotland’s progress in achieving its legislated targets to reduce greenhouse gas emissions
Overall greenhouse gas emissions reduced by 3% in 2017 compared to a 10% fall in 2016. The fall was again led by the power sector due in large part to Scotland’s first full year of coal-free electricity generation. Recent performance in other sectors shows only incremental improvement at best and unless emissions reductions are delivered economy-wide Scotland is at risk of missing its new interim target of a 56% reduction in emissions by 2020.
Key findings
Setting a net-zero greenhouse gas emissions target for 2045 represents a step-change in ambition for Scotland.
The Scottish Parliament’s 2030 target to reduce emissions by 75% will be extremely challenging to meet. It must be backed up by steps to drive meaningful emissions reductions immediately.
Scotland’s Programme for Government 2019-20 alongside other recent policies sent a clear signal that the Scottish Government is taking its more ambitious targets seriously but there is much more to do.
Scotland’s ability to deliver its net-zero target is contingent on action taken in the UK and vice versa.
Sequential Combustion in Steam Methane Reformers for Hydrogen and Power Production With CCUS in Decarbonized Industrial Clusters
Aug 2020
Publication
In future energy supply systems hydrogen and electricity may be generated in decarbonized industrial clusters using a common infrastructure for natural gas supply electricity grid and transport and geological storage of CO2. The novel contribution of this article consists of using sequential combustion in a steam methane reforming (SMR) hydrogen plant to allow for capital and operating cost reduction by using a single post-combustion carbon capture system for both the hydrogen process and the combined cycle gas turbine (CCGT) power plant plus appropriate integration for this new equipment combination. The concept would be widely applied to any post-combustion CO2 capture process. A newly developed rigorous gPROMs model of two hydrogen production technologies covering a wide range of hydrogen production capacities thermodynamically integrated with commercially available gas turbine engines quantifies the step change in thermal efficiency and hydrogen production efficiency. It includes a generic post-combustion capture technology – a conventional 30%wt MEA process - to quantify the reduction in size of CO2 absorber columns the most capital intensive part of solvent-based capture systems. For a conventional SMR located downstream of an H-class gas turbine engine followed by a three-pressure level HRSG and a capture plant with two absorbers the integrated system produces ca. 696400 Nm3/h of H2 with a net power output of 651 MWe at a net thermal efficiency of 38.9%LHV. This corresponds to 34 MWe of additional power increasing efficiency by 4.9% points and makes one absorber redundant compared to the equivalent non-integrated system producing the same volume of H2. For a dedicated gas heated reformer (GHR) located downstream of an aeroderivative gas turbine engine followed by a two-pressure level HRSG and a capture plant with one absorber the integrated system produces ca. 80750 Nm3/h of H2 with a net power output of 73 MWe and a net thermal efficiency of 54.7%LHV. This corresponds to 13 MWe of additional power output increasing efficiency by 13.5% points and also makes one absorber redundant. The article also presents new insights for the design and operation of reformers integrated with gas turbines and with CO2 capture.
The Use of Hydrogen to Separate and Recycle Neodymium–iron–boron-type Magnets from Electronic Waste
May 2015
Publication
The rare earth metals have been identified by the European Union and the United States as being at greatest supply risk of all the materials for clean energy technologies. Of particular concern are neodymium and dysprosium both of which are employed in neodymium–iron–boron based magnets. Recycling of magnets based on these materials and contained within obsolete electronic equipment could provide an additional and secure supply. In the present work hydrogen has been employed as a processing agent to decrepitate sintered neodymium–iron–boron based magnets contained within hard disk drives into a demagnetised hydrogenated powder. This powder was then extracted mechanically from the devices with an extraction efficiency of 90 ± 5% and processed further using a combination of sieves and ball bearings to produce a powder containing <330 parts per million of nickel contamination. It is then possible for the extracted powder to be re-processed in a number of ways namely directly by blending and re-sintering to form fully dense magnets by Hydrogenation Disproportionation Desorption Recombination processing to produce an anisotropic coercive powder suitable for bonded magnets by re-melting; or by chemical extraction of the rare earth elements from the alloy. For example it was shown that by the re-sintering route it was possible to recover >90% of the magnetic properties of the starting material with significantly less energy than that employed in primary magnet production. The particular route used will depend upon the magnetic properties required the level of contamination of the extracted material and the compositional variation of the feedstock. The various possibilities have been summarised in a flow diagram.
A Novel Self-Assembly Strategy for the Fabrication of Nano-Hybrid Satellite Materials with Plasmonically Enhanced Catalytic Activity
Jun 2021
Publication
The generation of hydrogen from water using light is currently one of the most promising alternative energy sources for humankind but faces significant barriers for large-scale applications due to the low efficiency of existing photo-catalysts. In this work we propose a new route to fabricate nano-hybrid materials able to deliver enhanced photo-catalytic hydrogen evolution combining within the same nanostructure a plasmonic antenna nanoparticle and semiconductor quantum dots (QDs). For each stage of our fabrication process we probed the chemical composition of the materials with nanometric spatial resolution allowing us to demonstrate that the final product is composed of a silver nanoparticle (AgNP) plasmonic core surrounded by satellite Pt decorated CdS QDs (CdS@Pt) separated by a spacer layer of SiO2 with well-controlled thickness. This new type of photoactive nanomaterial is capable of generating hydrogen when irradiated with visible light displaying efficiencies 300% higher than the constituting photo-active components. This work may open new avenues for the development of cleaner and more efficient energy sources based on photo-activated hydrogen generation.
CFD Modelling of Underexpanded Hydrogen Jets Exiting Rectangular Shaped Openings
May 2020
Publication
Underexpanded jet releases from circular nozzles have been studied extensively both experimentally and numerically. However jet releases from rectangular openings have received much less attention and information on their dispersion behaviour is not as widely available. In this paper Computational Fluid Dynamics (CFD) is used to assess the suitability of using a pseudo-source approach to model jet releases from rectangular openings. A comparative study is performed to evaluate the effect of nozzle shape on jet structure and dispersion characteristics for underexpanded hydrogen jet releases. Jet releases issuing from a circular nozzle and rectangular nozzles with aspect ratios ranging from two to eight are modelled including resolution of the near-field behaviour. The experimental work of Ruggles and Ekoto (2012 2014) is used as a basis for validating the modelling approach used and an additional case study in which jets with a stagnation-to-ambient pressure ratio of 300:1 are modelled is also performed. The CFD results show that for the 10:1 pressure ratio release the hazard volume and hazard distance remain largely unaffected by nozzle shape. For the higher pressure release the hazard volume is larger for the rectangular nozzle releases than the equivalent release through a circular orifice though the distance to lower flammability limit is comparable across the range of nozzle shapes considered. For both of the release pressures simulated the CFD results illustrate that a pseudo-source approach produces conservative results for all nozzle shapes considered. This finding has useful practical implications for consequence analysis in industrial applications such as the assessment of leaks from flanges and connections in pipework.
Hydrogen Production from Natural Gas and Biomethane with Carbon Capture and Storage – A Techno-environmental Analysis
Mar 2020
Publication
This study presents an integrated techno-environmental assessment of hydrogen production from natural gas and biomethane combined with CO2 capture and storage (CCS). We have included steam methane reforming (SMR) and autothermal reforming (ATR) for syngas production. CO2 is captured from the syngas with a novel vacuum pressure swing adsorption (VPSA) process that combines hydrogen purification and CO2 separation in one cycle. As comparison we have included cases with conventional amine-based technology. We have extended standard attributional Life Cycle Assessment (LCA) following ISO standards with a detailed carbon balance of the biogas production process (via digestion) and its by-products. The results show that the life-cycle greenhouse gas (GHG) performance of the VPSA and amine-based CO2 capture technologies is very similar as a result of comparable energy consumption. The configuration with the highest plant-wide CO2 capture rate (almost 100% of produced CO2 captured) is autothermal reforming with a two-stage water-gas shift and VPSA CO2 capture – because the latter has an inherently high CO2 capture rate of 98% or more for the investigated syngas. Depending on the configuration the addition of CCS to natural gas reforming-based hydrogen production reduces its life-cycle Global Warming Potential by 45–85 percent while the other environmental life-cycle impacts slightly increase. This brings natural gas-based hydrogen on par with renewable electricity-based hydrogen regarding impacts on climate change. When biomethane is used instead of natural gas our study shows potential for net negative greenhouse gas emissions i.e. the net removal of CO2 over the life cycle of biowaste-based hydrogen production. In the special case where the biogas digestate is used as agricultural fertiliser and where a substantial amount of the carbon in the digestate remains in the soil the biowaste-based hydrogen reaches net-negative life cycle greenhouse gas emissions even without the application of CCS. Addition of CCS to biomethane-based hydrogen production leads to net-negative emissions in all investigated cases.
Development of a Tangential Neutron Radiography System for Monitoring the Fatigue Cracks in Hydrogen Fuel Tanks
Jun 2016
Publication
Purpose- To present an overview of the research and development carried out in a European funded framework 7 (FP7) project called SafeHPower for the implementation of neutron radiography to inspect fatigue cracks in vehicle and storage hydrogen fuel tanks. Project background– Hydrogen (H2) is the most promising replacement fuel for road transport due to its abundance efficiency low carbon footprint and the absence of harmful emissions. For the mass market of hydrogen to take off the safety issue surrounding the vehicle and storage hydrogen tanks needs to be addressed. The problem is the residual and additional stresses experienced by the tanks during the continuous cyclic loading between ambient and storage pressure which can result in the development of fatigue cracks. Steel tanks used as storage containers at service stations and depots and/or the composite tanks lined with steel are known to suffer from hydrogen embrittlement (HE). Another issue is the explosive nature of hydrogen (when it is present in the 18-59% range) where it is mixed with oxygen which can lead to catastrophic consequences including loss of life. Monitoring systems that currently exist in the market impose visual examination tests pressure tests and hydrostatic tests after the tank installation [1] [2]. Three inspection systems have been developed under this project to provide continuous monitoring solutions. Approach and scope- One of the inspection systems based on the neutron radiography (NR) technology that was developed in different phases with the application of varied strategies has been presented here. Monte Carlo (MCNP) simulation results to design and develop a bespoke collimator have been presented. A limitation of using an inertial electrostatic Deuterium-Tritium (D-T) pulsed neutron generator for fast neutron radiography has been discussed. Radiographs from the hydrogen tank samples obtained using thermal neutrons from a spallation neutron source at ISIS Rutherford laboratory UK have been presented. Furthermore radiograph obtained using thermal neutrons from a portable D-T neutron generator has been presented. In conclusion a proof in principle has been made to show that the defects in the hydrogen fuel tank can be detected using thermal neutron radiography.
Hydrogen: A Critical Part of Heat Decarbonisation
Feb 2021
Publication
The use of clean hydrogen is likely to form a key part of a net-zero emissions future and has the potential to replace natural gas for end use heating. As part of BDR Thermea Group Baxi Heating UK are at the forefront of hydrogen boiler development. Working with the Hy4Heat programme hydrogen fuelled boilers have been produced for inclusion in trial sites across the UK. This presentation will explore progress to date together with the hydrogen-ready boiler concept.
A Probabilistic Framework for the Techno-economic Assessment of Smart Energy Hubs for Electric Vehicle Charging
Apr 2022
Publication
Smart energy hubs (Smart Hubs) equipped with Vehicle-to-Grid (V2G) charging photovoltaic (PV) energy generation and hydrogen storage capabilities are an emerging technology with potential to alleviate the impact of electric vehicles (EV) on the electricity grid. Their operation however is characterised by intermittent PV energy generation as well as uncertainties in EV traffic and driver preference. These uncertainties when combined with the need to maximise their financial return while guaranteeing driver satisfaction yields a challenging decision-making problem. This paper presents a novel Monte-Carlo-based modelling and computational framework for simulating the operation of Smart Hubs — providing a means for a holistic assessment of their technical and financial viability. The framework utilises a compact and representative mathematical model accounting for power losses PV module degradation variability in EV uptake price inflation driver preference and diversity in charge points and EVs. It provides a comprehensive approach for dealing with uncertainties and dependencies in EV data while being built on an energy management algorithm that maximises revenue generation ensures driver satisfaction and preserves battery life. The energy management problem is formulated as a mixed-integer linear programming problem constituting a business case that includes an adequate V2G reward model for drivers. To demonstrate its applicability the framework was used to assess the financial viability of a fleet management site for various caps on vehicle stay at the site. From the assessment controlled charging was found to be more financially rewarding in all cases yielding between 1.7% and 3.1% more revenue than uncontrolled charging. The self-consumption of the site was found to be nearly 100% due mainly to local load shifting and dispatchable hydrogen generation. V2G injection was however negligible — suggesting its unattractiveness for sites that do not participate in the demand side response market. Overall the numerical results obtained validate the applicability of the proposed framework as a decision-support tool in the sustainable design and operation of Smart Hubs for EV charging.
No more items...