United Kingdom
Synergistic Hybrid Marine Renewable Energy Harvest System
Mar 2024
Publication
This paper proposes a novel hybrid marine renewable energy-harvesting system to increase energy production reduce levelized costs of energy and promote renewable marine energy. Firstly various marine renewable energy resources and state-of-art technologies for energy exploitation and storage were reviewed. The site selection criteria for each energy-harvesting approach were identified and a scoring matrix for site selection was proposed to screen suitable locations for the hybrid system. The Triton Knoll wind farm was used to demonstrate the effectiveness of the scoring matrix. An integrated energy system was designed and FE modeling was performed to assess the effects of additional energy devices on the structural stability of the main wind turbine structure. It has been proven that the additional energy structures have a negligible influence on foundation/structure deflection.
Thermoacoustic Instability Considerations for High Hydrogen Combustion in Lean Premixed Gas Turbine Combustors: A Review
Jan 2021
Publication
Hydrogen is receiving increasing attention as a versatile energy vector to help accelerate the transition to a decarbonised energy future. Gas turbines will continue to play a critical role in providing grid stability and resilience in future low-carbon power systems; however it is recognised that this role is contingent upon achieving increased thermal efficiencies and the ability to operate on carbon-neutral fuels such as hydrogen. An important consideration in the development of gas turbine combustors capable of operating with pure hydrogen or hydrogen-enriched natural gas are the significant changes in thermoacoustic instability characteristics associated with burning these fuels. This article provides a review of the effects of burning hydrogen on combustion dynamics with focus on swirl-stabilised lean-premixed combustors. Experimental and numerical evidence suggests hydrogen can have either a stabilising or destabilising impact on the dynamic state of a combustor through its influence particularly on flame structure and flame position. Other operational considerations such as the effect of elevated pressure and piloting on combustion dynamics as well as recent developments in micromix burner technology for 100% hydrogen combustion have also been discussed. The insights provided in this review will aid the development of instability mitigation strategies for high hydrogen combustion.
The Heralds of Hydrogen: The Economic Sectors that are Driving the Hydrogen Economy in Europe
Jan 2021
Publication
This paper looked at 39 hydrogen associations across Europe to understand which economic sectors support the hydrogen transition in Europe and why they do so. Several broad conclusions can be drawn from this paper. It is clear that the support for hydrogen is broad and from a very wide spectrum of economic actors that have clear interests in the success of the hydrogen transition. Motivations for support differ. Sales and market growth are important for companies pursuing professional scientific and technical activities as well as manufacturers of chemicals machinery electronic or electrical equipment and fabricated metals. The increasing cost of CO2 combines with regulatory and societal pressure to decarbonize and concerns from investors about the long-term profitability of sectors with high emissions. This makes hydrogen especially interesting for companies working in the energy transport steel and chemical industries. Another motivation is the ability to keep using existing fixed assets relevant for ports oil and gas companies and natural gas companies. More sector-specific concerns are a technological belief held by some motor vehicle manufacturers in the advantages of FCVs over BEVs for private mobility which is held more widely regarding heavy road transport. Security of supply and diversifying the current business portfolio come up specifically for natural gas companies. Broader concerns about having to shift into other energy technologies as a core business are reasons for interest from the oil and gas sector and ports.
Perhaps the most important lesson is that the hydrogen transition has already begun – but it needs continued policy support and political commitment. Carbon-intensive industries such as steel and chemicals are clearly interested and willing to invest billions but need policy support to avoid carbon leakage to high-carbon competitors before they commit. The gas grid is ready and many operators and utility companies are eager but they need clearance to experiment with blending in hydrogen. Hydrogen road vehicles still face many regulatory hurdles. There are several clusters that can serve as models and nuclei for the future European hydrogen economy in different parts of Europe. However these nuclei will need more public funding and regulatory support for them to grow.
Link to document on Oxford Institute for Energy Studies website
Perhaps the most important lesson is that the hydrogen transition has already begun – but it needs continued policy support and political commitment. Carbon-intensive industries such as steel and chemicals are clearly interested and willing to invest billions but need policy support to avoid carbon leakage to high-carbon competitors before they commit. The gas grid is ready and many operators and utility companies are eager but they need clearance to experiment with blending in hydrogen. Hydrogen road vehicles still face many regulatory hurdles. There are several clusters that can serve as models and nuclei for the future European hydrogen economy in different parts of Europe. However these nuclei will need more public funding and regulatory support for them to grow.
Link to document on Oxford Institute for Energy Studies website
Energy Transition: Measurement Needs Within the Hydrogen Industry
Dec 2017
Publication
Hydrogen in the UK is beginning to shift from hypothetical debates to practical demonstration projects. An ever-growing evidence base has showcased how the costs of hydrogen and its barriers to entry are reducing such that it now has practical potential to contribute to the decarbonisation of the UK's energy sector.
Despite this hydrogen has yet to have wide commercial uptake due in part to a number of barriers where measurement plays a critical role. To accelerate the shift towards the hydrogen economy these challenges have been identified and prioritised by NPL.
The report Energy transition: Measurement needs within the hydrogen industry outlines the challenges identified. The highest priority issues are:
This Document can be downloaded from their website
Despite this hydrogen has yet to have wide commercial uptake due in part to a number of barriers where measurement plays a critical role. To accelerate the shift towards the hydrogen economy these challenges have been identified and prioritised by NPL.
The report Energy transition: Measurement needs within the hydrogen industry outlines the challenges identified. The highest priority issues are:
- Material development for fuel cells and electrolysers to reduce costs and assess critical degradation mechanisms – extending lifetime and durability is key to the commercialisation of these technologies.
- Impact assessment of added odorant to hydrogen to aid leak detection. Measurement of its impact during pipeline transportation and on the end-use application (particularly fuel cell technology) will be important to provide assurance that it will not affect lifetime and durability.
- Determination of the blend ratio when hydrogen is mixed with natural gas in the gas grid. Accurate flow rate measurement and validated metering methods are needed to ensure accurate billing of the consumer.
- Measurement of the combustion properties of hydrogen including flame detection and propagation temperature and nitrogen oxides (NOx) emissions should it be used for heat applications to ensure existing and new appliances are suitable for hydrogen.
- Assessment of the suitability of existing gas infrastructure and materials for hydrogen transportation. Building an understanding of what adaptations might need to be made to avoid for example air permeation metal embrittlement and hydrogen leakage.
- Validated techniques for hydrogen storage which will require measurement of the efficiency and capacity of each mechanism through robust metering leakage detection and purity analysis to ensure they are optimised for the storage of hydrogen gas.
This Document can be downloaded from their website
Energy System Requirements of Fossil-free Steelmaking using Hydrogen Direct Reduction
May 2021
Publication
The iron and steel industry is one of the world’s largest industrial emitters of greenhouse gases. One promising option for decarbonising the industry is hydrogen direct reduction of iron (H-DR) with electric arc furnace (EAF) steelmaking powered by zero carbon electricity. However to date little attention has been given to the energy system requirements of adopting such a highly energy-intensive process. This study integrates a newly developed long-term energy system planning tool with a thermodynamic process model of H-DR/EAF steelmaking developed by Vogl et al. (2018) to assess the optimal combination of generation and storage technologies needed to provide a reliable supply of electricity and hydrogen. The modelling tools can be applied to any country or region and their use is demonstrated here by application to the UK iron and steel industry as a case study. It is found that the optimal energy system comprises 1.3 GW of electrolysers 3 GW of wind power 2.5 GW of solar 60 MW of combined cycle gas with carbon capture 600 GWh/600 MW of hydrogen storage and 30 GWh/130 MW of compressed air energy storage. The hydrogen storage requirements of the industry can be significantly reduced by maintaining some dispatchable generation for example from 600 GWh with no restriction on dispatchable generation to 140 GWh if 20% of electricity demand is met using dispatchable generation. The marginal abatement costs of a switch to hydrogen-based steelmaking are projected to be less than carbon price forecasts within 5–10 years.
Optimal Scheduling of Multi-energy Type Virtual Energy Storage System in Reconfigurable Distribution Networks for Congestion Management
Jan 2023
Publication
The virtual energy storage system (VESS) is one of the emerging novel concepts among current energy storage systems (ESSs) due to the high effectiveness and reliability. In fact VESS could store surplus energy and inject the energy during the shortages at high power with larger capacities compared to the conventional ESSs in smart grids. This study investigates the optimal operation of a multi-carrier VESS including batteries thermal energy storage (TES) systems power to hydrogen (P2H) and hydrogen to power (H2P) technologies in hydrogen storage systems (HSS) and electric vehicles (EVs) in dynamic ESS. Further demand response program (DRP) for electrical and thermal loads has been considered as a tool of VESS due to the similar behavior of physical ESS. In the market three participants have considered such as electrical thermal and hydrogen markets. In addition the price uncertainties were calculated by means of scenarios as in stochastic programming while the optimization process and the operational constraints were considered to calculate the operational costs in different ESSs. However congestion in the power systems is often occurred due to the extreme load increments. Hence this study proposes a bi-level formulation system where independent system operators (ISO) manage the congestion in the upper level while VESS operators deal with the financial goals in the lower level. Moreover four case studies have considered to observe the effectiveness of each storage system and the simulation was modeled in the IEEE 33-bus system with CPLEX in GAMS.
A Mountain to Climb? Tracking Progress in Scaling Up Renewable Gas Production in Europe
Oct 2019
Publication
In the last couple of years there has been increasing recognition by key players in the European gas industry that to mitigate the risk of terminal decline in the context of a decarbonising energy system there will need to be rapid scale up of decarbonised gas. This has led to several projections of the scale of decarbonised gas which could potentially be supplied by 2030 2040 or 2050. This paper joint with the Sustainable Gas Institute at Imperial College London considers the very significant rate of scale up and the significant cost reductions contemplated by such projections. Based on a database of actual announced projects (both committed and in earlier stages of development) for production of decarbonised gas it then considers the extent to which project activity is consistent with meeting the ambitious projections. It identifies a significant gap in current levels of activity largely because there is not yet sufficient economic incentive for investors to develop the required projects. It is intended that this paper will form the basis of continued tracking of the level of activity over the coming years to help inform industry players of further actions which may be required.
HyDeploy Report: Material Effects of Introducing Hydrogen into the UK Gas Supply
Jun 2018
Publication
Introduction of hydrogen into the UK gas main has been reviewed in terms of how materials within the Keele G3 gas distribution network (G3 GDN) on the Keele University network may be affected by contact with natural gas (NG):hydrogen blends up to a limit of 20 % mol/mol hydrogen.<br/>This work has formed part of the supporting evidence for a 1 year hydrogen blending trial on the Keele G3 GDN coordinated by the HyDeploy consortium (formed of representatives of Cadent Northern Gas Networks ITM Power Progressive Energy HSL and Keele University).<br/>A wide range of materials were identified and assessed via a combination of literature review and practical test programmes. No significant changes to material properties in terms of accelerated material degradation or predicted efficiency of gas confinement were identified which would cause concern for the year-long trial at Keele.<br/>It can be concluded that materials on the Keele G3 GDN should be acceptable to provide a safe operating network the HyDeploy demonstrator project up to a level of 20 % mol/mol hydrogen.<br/>Check the supplements tab for the other documents in this report
Hydrous Hydrazine Decomposition for Hydrogen Production Using of Ir/CeO2: Effect of Reaction Parameters on the Activity
May 2021
Publication
In the present work an Ir/CeO2 catalyst was prepared by the deposition–precipitation method and tested in the decomposition of hydrazine hydrate to hydrogen which is very important in the development of hydrogen storage materials for fuel cells. The catalyst was characterised using different techniques i.e. X-ray photoelectron spectroscopy (XPS) transmission electron microscopy (TEM) scanning electron microscopy (SEM) equipped with X-ray detector (EDX) and inductively coupled plasma—mass spectroscopy (ICP-MS). The effect of reaction conditions on the activity and selectivity of the material was evaluated in this study modifying parameters such as temperature the mass of the catalyst stirring speed and concentration of base in order to find the optimal conditions of reaction which allow performing the test in a kinetically limited regime.
Well to Wheel Analysis of Low Carbon Alternatives for Road Traffic
Sep 2015
Publication
Several alternative fuel–vehicle combinations are being considered for replacement of the internal combustion engine (ICE) vehicles to reduce greenhouse gas (GHG) emissions and the dependence on fossil fuels. The International Energy Agency has proposed the inclusion of low carbon alternatives such as electricity hydrogen and biofuels in the transport sector for reducing the GHG emissions and providing a sustainable future. This paper compares the use of these alternative fuels viz. electricity hydrogen and bio-ethanol in combination with battery electric vehicle (BEV) and fuel cell electric vehicle (FCEV) technologies on the basis of their overall efficiency and GHG emissions involved in the conversion of the primary energy source to the actual energy required at wheels through a well-to-wheel analysis. The source of energy for electricity production plays a major role in determining the overall efficiency and the GHG emissions of a BEV. Hence electricity production mix of Germany (60% fossil fuel energy) France (76% nuclear energy) Sweden and Austria (60 and 76% renewable energy respectively) the European Union mix (48% fossil fuel energy) and the United States of America (68% fossil fuel energy) are considered for the BEV analysis. In addition to the standard hydrogen based FCEVs CNG and bio-ethanol based FCEVs are analysed. The influence of a direct ethanol fuel cell (DEFC) on GHG emissions and overall chain efficiency is discussed. In addition to the standard sources of bio-ethanol (like sugarcane corn etc.) sources like wood waste and wheat straw are included in the analysis. The results of this study suggest that a BEV powered by an electricity production mix dominated by renewable energy and bio-ethanol based DEFC electric vehicles offer the best solution in terms of GHG emissions efficiency and fossil fuel dependency. Bio-ethanol as a fuel has the additional advantage to be implemented readily in ICE vehicles followed by advancements through reformer based FCEVs and DEFC electric vehicles. Although important this analysis does not include the health effects of the alternative vehicles. Bio-ethanol used in an ICE may lead to increased emission of acetaldehydes which however might not be the case if it is used in fuel cells.
Deep-Decarbonisation Pathways for UK Industry
Dec 2020
Publication
The Climate Change Committee (CCC) commissioned Element Energy to improve our evidence base on the potential of industrial deep-decarbonisation measures (fuel switching CCS/BECCS measures to reduce methane emissions) and develop pathways for their application. This report summarises the evidence and results of the work including:
- Evidence on the key constraints and costs for technology and infrastructure deployment
- The methodology and new Net Zero Industry Pathway (N-ZIP) model used to determine deep-decarbonisation pathways for UK industry (drawing on the evidence above)
- A set of pathways and wider sensitivities produced using the N-ZIP model which fed into the CCC’s Sixth Carbon Budget pathways
- Recommended actions and policy measures as informed by the study.
Spin Pinning Effect to Reconstructed Oxyhydroxide Layer on Ferromagnetic Oxides for Enhanced Water Oxidation
Jun 2021
Publication
Producing hydrogen by water electrolysis suffers from the kinetic barriers in the oxygen evolution reaction (OER) that limits the overall efficiency. With spin-dependent kinetics in OER to manipulate the spin ordering of ferromagnetic OER catalysts (e.g. by magnetization) can reduce the kinetic barrier. However most active OER catalysts are not ferromagnetic which makes the spin manipulation challenging. In this work we report a strategy with spin pinning effect to make the spins in paramagnetic oxyhydroxides more aligned for higher intrinsic OER activity. The spin pinning effect is established in oxideFM/oxyhydroxide interface which is realized by a controlled surface reconstruction of ferromagnetic oxides. Under spin pinning simple magnetization further increases the spin alignment and thus the OER activity which validates the spin effect in rate-limiting OER step. The spin polarization in OER highly relies on oxyl radicals (O∙) created by 1st dehydrogenation to reduce the barrier for subsequent O-O coupling.
EUA- Bringing Hydrogen Alive
Apr 2021
Publication
The UK is on course to become a global leader in hydrogen technology. Over £3bn is ready to be invested into hydrogen today. The pace of activity is rapid and the opportunities are vast.
Join us at our free to attend event where you will gain unique insights into how the Hydrogen industry is progressing together with exclusive access to future plans.
The dynamic and lively session will demonstrate the viability of hydrogen as a key component to achieve Net Zero.
Confirmed contributors include:
Join us at our free to attend event where you will gain unique insights into how the Hydrogen industry is progressing together with exclusive access to future plans.
The dynamic and lively session will demonstrate the viability of hydrogen as a key component to achieve Net Zero.
Confirmed contributors include:
- National Grid Gas Transmission
- Cadent
- Chris Train Previous CEO Cadent
- DNV
- Worcester Bosch
- ITM Power
- Northern Gas Networks
- Decarbonising Heat in Buildings - New Research Findings from the Gas Distribution Networks
Study of Activity and Super-Capacitance Exhibited by Bifunctional Raney 2.0 Catalyst for Alkaline Water-Splitting Electrolysis
Dec 2020
Publication
Low-cost high-performance coatings for hydrogen production via electrolytic water-splitting are of great importance for de-carbonising energy. In this study the Raney2.0 coating was analysed using various electrochemical techniques to assess its absolute performance and it was confirmed to have an extremely low overpotential for hydrogen evolution of just 28 mV at 10 mA/cm2. It was also confirmed to be an acceptable catalyst for oxygen evolution making it the highest performing simple bifunctional electrocatalyst known. The coating exhibits an extremely high capacitance of up to 1.7 F/cm2 as well as being able to store 0.61 J/cm2 in the form of temporary hydride deposits. A new technique is presented that performs a best-fit of a transient simulation of an equivalent circuit containing a constant phase element to cyclic voltammetry measurements. From this the roughness factor of the coating was calculated to be approximately 40000 which is the highest figure ever reported for this type of material. The coating is therefore an extremely useful improved bifunctional coating for the continued roll-out of alkaline electrolysis for large-scale renewable energy capture via hydrogen production.
Direct Evidence for Solid-like Hydrogen in a Nanoporous Carbon Hydrogen Storage Material at Supercritical Temperatures
Jul 2015
Publication
Here we report direct physical evidence that confinement of molecular hydrogen (H2) in an optimized nanoporous carbon results in accumulation of hydrogen with characteristics commensurate with solid H2 at temperatures up to 67 K above the liquid vapor critical temperature of bulk H2. This extreme densification is attributed to confinement of H2 molecules in the optimally sized micropores and occurs at pressures as low as 0.02 MPa. The quantities of contained solid-like H2 increased with pressure and were directly evaluated using in situ inelastic neutron scattering and confirmed by analysis of gas sorption isotherms. The demonstration of the existence of solid-like H2 challenges the existing assumption that supercritical hydrogen confined in nanopores has an upper limit of liquid H2 density. Thus this insight offers opportunities for the development of more accurate models for the evaluation and design of nanoporous materials for high capacity adsorptive hydrogen storage.
Hydrogen: Untapped Energy?
Jan 2012
Publication
Hydrogen has potential applications across our future energy systems due particularly to its relatively high energy weight ratio and because it is emission-free at the point of use. Hydrogen is also abundant and versatile in the sense that it could be produced from a variety of primary energy sources and chemical substances including water and used to deliver power in a variety of applications including fuel cell combined heat and power technologies. As a chemical feedstock hydrogen has been used for several decades and such expertise could be fed back into the relatively new areas of utilising hydrogen to meet growing energy demands.<br/>The UK interest in hydrogen is also growing with various industrial academic and governmental organisations investigating how hydrogen could be part of a diverse portfolio of options for a low carbon future. While hydrogen as an alternative fuel is yet to command mass-appeal in the UK energy market IGEM believes hydrogen is capable of allowing us to use the wide range of primary energy sources at our disposal in a much greener and sustainable way.<br/>IGEM also sees hydrogen playing a small but key role in the gas industry whereby excess renewable energy is used to generate hydrogen which is then injected into the gas grid for widespread distribution and consumption. Various studies suggest admixtures containing up to 10 – 50%v/v hydrogen could be safely administered into the existing natural gas infrastructure. However IGEM understands that this would currently not be permissible under the Gas Safety (Management) Regulations (GS(M)R) for gas conveyance here in the UK. Also proper assessments of the risks associated with adding hydrogen to natural gas streams will need to be performed so that such systems can be managed effectively.<br/>IGEM has also identified a need for standards that cover the safety requirements of hydrogen technologies particularly those pertaining to installations in commercial or domestic environments. IGEM also recommend that the technical measures used to determine separation distances for hydrogen installations particularly refuelling stations are re-assessed through a systematic identification and control of potential sources of ignition.<br/>Hydrogen has the potential to be a significant fuel of the future and part of a diverse portfolio of energy options capable of meeting growing energy needs. This report therefore seeks to demonstrate how hydrogen could be a potential option for energy storage and power generation in a diverse energy system. It also aims to inform the readers on the current state of hydrogen here in the UK and abroad. This report has been assembled for IGEM members interested bodies and the general public.
An Investigation of a (Vinylbenzyl) Trimethylammonium and N-Vinylimidazole-Substituted Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) Copolymer as an Anion-Exchange Membrane in a Lignin-Oxidising Electrolyser
Jun 2021
Publication
Electrolysis is seen as a promising route for the production of hydrogen from water as part of a move to a wider “hydrogen economy”. The electro-oxidation of renewable feedstocks offers an alternative anode couple to the (high-overpotential) electrochemical oxygen evolution reaction for developing low-voltage electrolysers. Meanwhile the exploration of new membrane materials is also important in order to try and reduce the capital costs of electrolysers. In this work we synthesise and characterise a previously unreported anion-exchange membrane consisting of a fluorinated polymer backbone grafted with imidazole and trimethylammonium units as the ion-conducting moieties. We then investigate the use of this membrane in a lignin-oxidising electrolyser. The new membrane performs comparably to a commercially-available anion-exchange membrane (Fumapem) for this purpose over short timescales (delivering current densities of 4.4 mA cm−2 for lignin oxidation at a cell potential of 1.2 V at 70 °C during linear sweep voltammetry) but membrane durability was found to be a significant issue over extended testing durations. This work therefore suggests that membranes of the sort described herein might be usefully employed for lignin electrolysis applications if their robustness can be improved.
A Quantitative Assessment of the Hydrogen Storage Capacity of the UK Continental Shelf
Nov 2020
Publication
Increased penetration of renewable energy sources and decarbonisation of the UK's gas supply will require large-scale energy storage. Using hydrogen as an energy storage vector we estimate that 150 TWh of seasonal storage is required to replace seasonal variations in natural gas production. Large-scale storage is best suited to porous rock reservoirs. We present a method to quantify the hydrogen storage capacity of gas fields and saline aquifers using data previously used to assess CO2 storage potential. We calculate a P50 value of 6900 TWh of working gas capacity in gas fields and 2200 TWh in saline aquifers on the UK continental shelf assuming a cushion gas requirement of 50%. Sensitivity analysis reveals low temperature storage sites with sealing rocks that can withstand high pressures are ideal sites. Gas fields in the Southern North Sea could utilise existing infrastructure and large offshore wind developments to develop large-scale offshore hydrogen production.
Hydrothermal Synthesis of Iridium-Substituted NaTaO3 Perovskites
Jun 2021
Publication
Iridium-containing NaTaO3 is produced using a one-step hydrothermal crystallisation from Ta2O5 and IrCl3 in an aqueous solution of 10 M NaOH in 40 vol% H2O2 heated at 240 °C. Although a nominal replacement of 50% of Ta by Ir was attempted the amount of Ir included in the perovskite oxide was only up to 15 mol%. The materials are formed as crystalline powders comprising cube-shaped crystallites around 100 nm in edge length as seen by scanning transmission electron microscopy. Energy dispersive X-ray mapping shows an even dispersion of Ir through the crystallites. Profile fitting of powder X-ray diffraction (XRD) shows expanded unit cell volumes (orthorhombic space group Pbnm) compared to the parent NaTaO3 while XANES spectroscopy at the Ir LIII-edge reveals that the highest Ir-content materials contain Ir4+. The inclusion of Ir4+ into the perovskite by replacement of Ta5+ implies the presence of charge-balancing defects and upon heat treatment the iridium is extruded from the perovskite at around 600 °C in air with the presence of metallic iridium seen by in situ powder XRD. The highest Ir-content material was loaded with Pt and examined for photocatalytic evolution of H2 from aqueous methanol. Compared to the parent NaTaO3 the Ir-substituted material shows a more than ten-fold enhancement of hydrogen yield with a significant proportion ascribed to visible light absorption.
2020 It's Time To Get Real
Mar 2020
Publication
Gi Editor Sharon Baker-Hallam sits down with Chris Stark CEO of the Committee on Climate Change to talk about this year’s Sir Denis Rooke Memorial Lecture the economic opportunities to be found in going green and why 2020 is a critical year in the ongoing battle against rising global temperatures
No more items...