Spain

The manuscript firstly describes the data collection and validation process for the European Hydrogen Incidents and Accidents Database (HIAD 2.0) a public repository tool collecting systematic data on hydrogen-related incidents and near-misses. This is followed by an overview of HIAD 2.0 which currently contains 706 events. Subsequently the approaches and procedures followed by the authors to derive lessons learned and formulate recommendations from the events are described. The lessons learned have been divided into four categories including system design; system manufacturing installation and modification; human factors and emergency response. An overarching lesson learned is that minor events which occurred simultaneously could still result in serious consequences echoing James Reason's Swiss Cheese theory. Recommendations were formulated in relation to the established safety principles adapted for hydrogen by the European Hydrogen Safety Panel considering operational modes industrial sectors and human factors. This work provide an important contribution to the safety of systems involving hydrogen benefitting technical safety engineers emergency responders and emergency services. The lesson learned and the discussion derived from the statistics can also be used in training and risk assessment studies being of equal importance to promote and assist the development of sound safety culture in organisations.

Metallic hydrides represent a safe way of storing hydrogen minimising explosion and flammability risks. Nowadays there are several methods for the storage of hydrogen and the more conventional techniques are high-pressure tanks for gaseous hydrogen and cryogenic vessels for liquid hydrogen. However there are two main drawbacks in the storage of gaseous and liquid hydrogen. First as a fuel hydrogen in the gaseous and liquid states is very combustible and the related law imposes strict regulations on its utilization storage and transportation. Secondly even under a high pressure hydrogen gas is not dense enough for compact storage. Moreover the gas storage at high pressure involves significant safety risks. Hydrogen storage in the metal hydrides does not have such deficiencies. Metal hydrides are safe and can be easily store and transported. For that reason it should be stressed that metallic hydrides represent a safe way of storing hydrogen minimising explosion and flammability risks. Among metallic hydrides one of the most promising hydrides in terms of absorbed hydrogen content is Mg2NiH4. However it is difficult to obtain Mg2Ni by the conventional melting method because of the large difference in vapour pressure and melting point between magnesium and nickel. This paper presents an alternative and safe method for obtaining such hydride: HCS (Hydriding Combustion Synthesis). This method presents some interesting advantages over its conventional counterpart: the process is carried out at lower reaction process which means safer process and the alloy stoichiometry is closer to the nominal (Mg2Ni) which allow better hydrogen absorption behaviour. The aim of this work is to investigate the formation mechanism of this compound and to study some parameters of the process.

A review of the effect of hydrogen on materials is addressed in this paper. General aspects of the interaction of hydrogen and materials hydrogen embrittlement low temperature effects material suitability for hydrogen service and materials testing are the main subjects considered in the first part of the paper. As a particular case of the effect of hydrogen in materials the hydride formation of titanium alloys is considered. Alpha titanium alloys are considered corrosion resistant materials in a wide range of environments. However hydrogen absorption and the possible associated problems must be taken into account when considering titanium as a candidate material for high responsibility applications. The sensitivity of three different titanium alloys Ti Gr-2 Ti Gr-5 and Ti Gr-12 to the Hydrogen Assisted Stress Cracking phenomena has been studied by means of the Slow Strain Rate Technique (SSRT). The testing media has been sea water and hydrogen has been produced on the specimen surface during the test by cathodic polarization. Tested specimens have been characterized by metallography and scanning electron microscopy. Results obtained show that the microstructure of the materials particularly the β phase content plays an important role on the sensitivity of the studied alloys to the Hydrogen Assisted Stress Cracking Phenomena.

This Hydrogen Roadmap aims to identify the challenges and opportunities for the full development of renewable hydrogen in Spain providing a series of measures aimed at boosting investment action taking advantage of the European consensus on the role that this energy vector should play in the context of green recovery. This Roadmap is therefore aligned with the 2021 Annual Sustainable Growth Strategy published by the European Commission which identifies the future Recovery and Resilience Mechanism as an opportunity to create emblematic areas of action at European level making two of these areas of action (Power up and Recharge and Refuel) an explicit mention of the development of renewable hydrogen in the European Union.

Hydrogen has been extensively used in many industrial applications for more than 100 years including production storage transport delivery and final use. Nevertheless the goal of the hydrogen energy system implies the use of hydrogen as an energy carrier in a more wide scale and for a public not familiarised with hydrogen technologies and properties.<br/>The road to the hydrogen economy passes by the development of safe practices in the production storage distribution and use of hydrogen. These issues are essential for hydrogen insurability. We have to bear in mind that a catastrophic failure in any hydrogen project could damage the insurance public perception of hydrogen technologies at this early step of development of hydrogen infrastructures.<br/>Safety is a key issue for the development of hydrogen economy and a great international effort is being done by different stakeholders for the development of suitable codes and standards concerning safety for hydrogen technologies [1 2]. Additionally to codes and standards different studies have been done regarding safety aspects of particular hydrogen energy projects during the last years [3 4]. Most of such have been focused on hydrogen production and storage in large facilities transport delivery in hydrogen refuelling stations and utilization mainly on fuel cells for mobile and stationary applications. In comparison safety considerations for hydrogen storage in small or medium scale facilities as usual in hydrogen production plants from renewable energies have received relatively less attention.<br/>After a brief introduction to risk assessment for hydrogen facilities this paper reports an example of risk assessment of a small solar hydrogen storage system applied to the INTA Solar Hydrogen Production and Storage facility as particular case and considers a top level Preliminary Failure Modes and Effects Analysis (FMEA) for the identification of hazard associated to the specific characteristics of the facility.

End-of-Life (EoL) technologies and strategies are needed to support the deployment of fuel cells and hydrogen (FCH) products. This article explores current and novel EoL technologies to recover valuable materials from the stacks of proton exchange membrane fuel cells and water electrolysers alkaline water electrolysers and solid oxide fuel cells. Current EoL technologies are mainly based on hydrometallurgical and pyro-hydrometallurgical methods for the recovery of noble metals while novel methods attempt to recover additional materials through efficient safe and cost-competitive pathways. Strengths weaknesses opportunities and threats of the reviewed EoL technologies are identified under techno-economic environmental and regulatory aspects. Beyond technologies strategies for the EoL of FCH stacks are defined mainly based on the role of manufacturers and recovery centres in the short- mid- and long-term. In this regard a dual role manufacturer/recovery centre would characterise long-term scenarios within a potential context of a well-established hydrogen economy.

Thermal power plants face substantial challenges to remain competitive in energy systems with high shares of variable renewables especially inflexible integrated gasification combined cycles (IGCC). This study addresses this challenge through the integration of Gas Switching Combustion (GSC) and Membrane Assisted Water Gas Shift (MAWGS) reactors in an IGCC plant for flexible electricity and/or H₂ production with inherent CO₂ capture. When electricity prices are high H₂ from the MAWGS reactor is used for added firing after the GSC reactors to reach the high turbine inlet temperature of the H-class gas turbine. In periods of low electricity prices the turbine operates at 10% of its rated power to satisfy the internal electricity demand while a large portion of the syngas heating value is extracted as H₂ in the MAWGS reactor and sold to the market. This product flexibility allows the inflexible process units such as gasification gas treating air separation unit and CO2 compression transport and storage to operate continuously while the plant supplies variable power output. Two configurations of the GSC-MAWGS plant are presented. The base configuration achieves 47.2% electric efficiency and 56.6% equivalent hydrogen production efficiency with 94.8–95.6% CO₂ capture. An advanced scheme using the GSC reduction gases for coal-water slurry preheating and pre-gasification reached an electric efficiency of 50.3% hydrogen efficiency of 62.4% and CO₂ capture ratio of 98.1–99.5%. The efficiency is 8.4%-points higher than the pre-combustion CO₂ capture benchmark and only 1.9%-points below the unabated IGCC benchmark.

The generation of hydrogen from water using light is currently one of the most promising alternative energy sources for humankind but faces significant barriers for large-scale applications due to the low efficiency of existing photo-catalysts. In this work we propose a new route to fabricate nano-hybrid materials able to deliver enhanced photo-catalytic hydrogen evolution combining within the same nanostructure a plasmonic antenna nanoparticle and semiconductor quantum dots (QDs). For each stage of our fabrication process we probed the chemical composition of the materials with nanometric spatial resolution allowing us to demonstrate that the final product is composed of a silver nanoparticle (AgNP) plasmonic core surrounded by satellite Pt decorated CdS QDs (CdS@Pt) separated by a spacer layer of SiO2 with well-controlled thickness. This new type of photoactive nanomaterial is capable of generating hydrogen when irradiated with visible light displaying efficiencies 300% higher than the constituting photo-active components. This work may open new avenues for the development of cleaner and more efficient energy sources based on photo-activated hydrogen generation.

The use of hydrogen as energy carrier is a promising option to decarbonize both energy and transport sectors. This paper presents an advanced techno-economic model for calculation of optimal dispatch of large-scale multi MW electrolysis plants in order to obtain a more accurate evaluation of the feasibility of business cases related to the supply of this fuel for different end uses combined with grid services' provision. The model is applied to the Spanish case using different scenarios to determine the minimum demand required from the FCEV market so that electrolysis facilities featuring several MW result in profitable business cases. The results show that grid services contribute to the profitability of hydrogen production for mobility given a minimum but considerable demand from FCEV fleets.

In this paper different techniques to test notched Small Punch (SPT) samples in fracture conditions in aggressive environments are studied based on the comparison of the micromechanisms at different rates. Pre-embrittled samples subsequently tested in air at rates conventionally employed (0.01 and 0.002 mm/s) are compared to embrittled ones tested in environment at the same rates (0.01 and 0.002 mm/s) and at a very slow rate (5E-5 mm/s). A set of samples tested in environment under a set of constant loads that produce very slow rates completes the experimental results. As a conclusion it is recommended to test SPT notched specimens in environment at very slow rates of around E-6 mm/s when characterizing in Hydrogen Embrittlement (HE) scenarios in order to allow the interaction material-environment to govern the process.