Very Low-cost Wireless Hydrogen Leak Detection for Hydrogen Infrastructure

A unique hydrogen leak detection strategy is the use of powerless indicator wraps for fittings and other pneumatic elements within a hydrogen facility. One transduction mechanism of such indicators is a color change that is induced by a reaction between a pigment and released hydrogen. This is an effective way to detect hydrogen leaks and to identify their source before they become a safety event, however this technology requires visual (manual) inspection to identify a color change or leak. One improvement in this strategy would be to improve the communication of the visual response to an end-user. Element One (E1) has previously developed and introduced DetecTape®, a self-fusing silicone non-reversible hydrogen leak detecting tape for application to potential leak sites in hydrogen piping, valves and fittings, and it has been successfully commercialized with excellent feedback. Element One’s sensors can be fabricated using either pigments or thin films which both change color and conductivity. Neither change requires an external power source. The conductivity change may be communicated as a wireless transmission such as passive radio frequency identification devices (RFID) to an appropriate receiving system where it may be remotely monitored to achieve higher levels of safety and reliability at low cost. Element One will report on its recent progress in the commercial development of remotely monitored hydrogen leak detection using several wireless protocols including passive RFID.