Safety

In this paper a case of hydrogen release in a typical research laboratory for the characterisation of hydrogen solid-state storage materials has been considered. The laboratory is equipped with various testing equipments for the assessment of hydrogen capacity in materials typically in the 1 to 200 bar pressure range and temperatures up to 500°C. Hydrogen is delivered at 200 bar by a 50 l gas bottle and a compressor located outside the laboratory. The safety measures directly related to hydrogen hazard consist in a distributed ventilation of the laboratory and air extraction fume hoods located on top of each instrument. Goal of this work is the modelling of hydrogen accidental release in a real laboratory case in order to provide a more fundamental basis for the laboratory safety design and assist the decision on the number and position of the safety sensors. The computational fluid dynamics code (CFD) ANSYS-CFX has been selected in order to perform the numerical investigations. Two basic accidental release scenarios have been assumed both at 200 bar:  a major leak corresponding to a guillotine breaking of the hydrogen distribution line and a smaller leak typical for a not properly tight junction.

Hydrogen vehicles may emerge as a leading contender to replace today’s internal combustion engine powered vehicles. A Phenomena Identification and Ranking Table exercise conducted as part of the European Network of Excellence on Hydrogen Safety (HySafe) identified the use of hydrogen vehicles in road tunnels as a topic of important concern. An internal project called HyTunnel was duly established within HySafe to review identify and analyse the issues involved and to contribute to the wider activity to establish the true nature of the hazards posed by hydrogen vehicles in the confined space of a tunnel and their relative severity compared to those posed by vehicles powered by conventional fuels including compressed natural gas (CNG). In addition to reviewing current hydrogen vehicle designs tunnel design practice and previous research a programme of experiments and CFD modelling activities was performed for selected scenarios to examine the dispersion and explosion hazards potentially posed by hydrogen vehicles. Releases from compressed gaseous hydrogen (CGH2) and liquid hydrogen (LH2) powered vehicles have been studied under various tunnel geometries and ventilation regimes. The findings drawn from the limited work done so far indicate that under normal circumstances hydrogen powered vehicles do not pose a significantly higher risk than those powered by petrol diesel or CNG but this needs to be confirmed by further research. In particular obstructions at tunnel ceiling level have been identified as a potential hazard in respect to fast deflagration or even detonation in some circumstances which warrants further investigation. The shape of the tunnel tunnel ventilation and vehicle pressure relief device (PRD) operation are potentially important parameters in determining explosion risks and the appropriate mitigation measures.

An experimental study of hydrogen/air premixed flame propagation in a closed rectangular channel with the inhibitions (N2 or CO2) was conducted to investigate the inhibiting effect of N2 and CO2 on the flame properties during its propagation. Both Schlieren system and the pressure sensor were used to capture the evolution of flame shape and pressure changes in the channel. It was found that both N2 and CO2 have considerable inhibiting effect on hydrogen/air premixed flames. Compared with N2 CO2 has more prominent inhibition which has been interpreted from thermal and kinetic standpoints. In all the flames the classic tulip shape was observed. With different inhibitor concentration the flame demonstrated three types of deformation after the classic tulip inversion. A simple theoretical analysis has also been conducted to indicate that the pressure wave generated upon the first flame-wall contact can affect the flame deformation depending on its meeting moment with the flame front. Most importantly the meeting moment is always behind the start of tulip inversion which suggests the non-dominant role of pressure wave on this featured phenomenon.

The course is an introduction to the procedures for safe handling of hydrogen flammable and toxic gases by small users working in the field of hydrogen and fuel cells. Theoretical and practical aspects are emphasized aiming at identifying the main hazards and reduce the risks associated with the use of these gases. Topics: 1. Market hydrogen production fuel cells and energy storage; 2. International System of Units Comparison between the ideal gas and real gases; 3. Safety of gases and hydrogen; 4. Cylinders fittings and valves for gases and hydrogen; 5. Purge of gases; 6. Infrastructure for gases and hydrogen; 7. Accidents with hydrogen.

Efficient storage of hydrogen is crucial for the success of hydrogen energy markets (early markets as well as transportation market). Hydrogen can be stored either as a compressed gas a refrigerated liquefied gas a cryo-compressed gas or in hydrides. This paper gives an overview of hydrogen storage technologies and details the specific issues and constraints related to the materials behaviour in hydrogen and conditions representative of hydrogen energy uses. It is indeed essential for the development of applications requiring long-term performance to have good understanding of long-term behaviour of the materials of the storage device and its components under operational loads.

Hydrogen energy is expanding world wide in recent years while hydrogen safety issues have drawn considerable attention. It is widely accepted that accidental hydrogen release in an open air environment will disperse quickly hence not causing significant hydrogen hazards. A hydrogen hazard is more likely to occur when hydrogen is accidentally released in a confined place i.e. parking garages and tunnels. Prediction the consequences of hydrogen detonation is important for hydrogen safety assessment and for ensuring the safety of installations during accidents. Hence an accident scenario of hydrogen release  nd detonation in a tunnel is analysed with GASFLOW-MPI in this paper. GASFLOW-MPI is a well validated parallel CFD code focusing on hydrogen transport combustion and detonation. GASFLOWMPI solves compressible Navier-Stokes equations with a powerful all-speed Arbitrary-Lagrangian-Eulerian (ALE) method hence it can cover both the non-compressible flow during the hydrogen relesase and dispersion phases and the compressible flow during combustion and detonation. A 3D model of a tunnel including eight cars is modelled. Firstly the hydrogen dispersion in the tunnel is calculated. Then the detonation in the tunnel is calculated by manually igniting the hydrogen at the top of the tunnel when the λ criterion is maximum. The pressure loads are calculated to evaluate the consequence of the hazard.

The test data of static burst strength and load cycle strength of composite pressure vessels are often described by GAUSSian normal or WEIBULL distribution function to perform safety analyses. The goodness of assumed distribution function plays a significant role in the inferential statistics to predict the population properties by using limited test data. Often GAUSSian and WEIBULL probability nets are empirical methods used to validate the distribution function; Anderson-Darling and Kolmogorov-Smirnov tests are the mostly favorable approaches for Goodness of Fit. However the different approaches used to determine the parameters of distribution function lead mostly to different conclusions for safety assessments.<br/>In this study six different methods are investigated to show the variations on the rates for accepting the composite pressure vessels according to GTR No. 13 life test procedure. The six methods are: a) Norm- Log based method b) Least squares regression c) Weighted least squares regression d) A linear approach based on good linear unbiased estimators e) Maximum likelihood estimation and f) The method of moments estimation. In addition various approaches of ranking function are considered. In the study Monte Carlo simulations are conducted to generate basic populations based on the distribution functions which are determined using different methods. Then the samples are extracted randomly from a population and evaluated to obtain acceptance rate. Here the “populations” and “samples” are corresponding to the burst strength or load cycle strength of the pressure vessels made from composite material and a plastic liner (type 4) for the storage of hydrogen. To the end the results are discussed and the best reliable methods are proposed.

The article discusses issues related to the operation of fuel cells stack fed with hydrogen at low temperature. The test object was a Toyota Mirai passenger car equipped with this type of powertrain. Tests were carried out in a thermoclimatic chamber at the Cracow University of Technology. They had an initial character and their aim was to evaluate the work of individual subassemblies of the propulsion system including the hydrogen supply system in terms of operational safety.

High-strength steels with yield strength of 960 MPa are susceptible to hydrogen-assisted cracking (HAC) during welding processing. In the present paper the implant test is used to study HAC in a quenched and tempered steel S960QL and a high-strength steel produced by thermo-mechanical controlled process S960MC. Welding is performed using the gas-metal arc welding process. Furthermore diffusible hydrogen concentration (H_D) in arc weld metal is determined. Based on the implant test results lower critical stress (LCS) for complete fracture critical implant stress (σ_krit) for crack initiation and embrittlement index (EI) are determined. At HD of 1.66 ml/100 g LCS is 605 MPa and 817 MPa for S960QL and S960MC respectively. EI is 0.30 and 0.46 for S960QL and S960MC respectively. Fracture surfaces of S960QL show higher degradation with reduced deformation. Both higher EI of S960MC and fractography show better resistance to HAC in the HAZ of S960MC compared to S960QL.

Community support and acceptance is part of the licence to operate for any industry. The hydrogen industry is no different and we will need to have strong support from the broad community to establish a viable hydrogen economy in Australia.<br/>As Woodside progresses our plans for bulk hydrogen export and associated domestic opportunities stakeholder engagement throughout will be critical to success. This talk will share Woodside’s approach to community engagement and local opportunities and how we plan to draw on more than 30 years’ experience operating liquefied natural gas plants in Western Australia’s Pilbara region.<br/>At this early stage of our hydrogen work we are beginning with the end in mind: engaging the customer. We’ve worked with local Australian businesses to help raise public awareness and interest in hydrogen by producing prototype consumer products. We will share experiences from this work that underscore the value of early engagement with all stakeholders: government regulators industrial and community neighbours and end consumers to enable the hydrogen economy vision for Australia. This paper will present information on community engagement and acceptance of hydrogen in Australia.<br/>This information has come from Woodside Energy Ltd by engaging with small businesses government regulators and the community at large. As we establish community acceptance for hydrogen as an energy carrier in Australia Woodside has been working in parallel to have standards and regulations established for hydrogen in Australia. Through our work with Hydrogen Mobility Australia we are advocating the adoption of ISO standards unless there is a specific geographic or health safety and environment reason not to.