Applications & Pathways

Green Hydrogen Microgrid System has been selected as a source of clean and renewable alternative energy because it is undergoing a global revolution and has been identified as a source of clean energy that may aid the country in achieving net-zero emissions in the coming years. The study proposes an innovative Microgrid Renewable hybrid system to achieve these targets. The proposed hybrid renewable energy system combines a photovoltaic generator (PVG) a fuel cell (FC) a supercapacitor (SC) and a home vehicle power supply (V2H) to provide energy for a predefined demand. The proposed architecture is connected to the grid and is highly dependent on solar energy during peak periods. During the night or shading period it uses FC as a backup power source. The SC assists the FC with high charge power. SC performs this way during load transients or quick load changes. A multi-agent system (MAS) was used to build a real energy management system (RT-HEMS) for intelligent coordination between components (MAS). The scheduling algorithm reduces energy consumption by managing the required automation devices without the need for additional network power. It will meet household energy requirements regardless of weather conditions including bright cloudy or rainy conditions. Implementation and discussion of the RT-HEMS ensures that the GHS is functioning properly and that the charge request is satisfied.

Road transport is recognized as having a negative impact on the environment. Policy has focused on replacement of the internal combustion engine (ICE) with less polluting forms of technology including battery electric and fuel cell electric powertrains. However progress is slow and both battery and fuel cell based vehicles face considerable commercialization challenges. To understand these challenges a review of current electric battery and fuel cell electric technologies is presented. Based on this review this paper proposes a battery electric vehicle (BEV) where components are sized to take into account the majority of user requirements with the remainder catered for by a trailer-based demountable intelligent fuel cell range extender. The proposed design can extend the range by more than 50% for small BEVs and 25% for large BEVs (the extended range of vehicles over 250 miles) reducing cost and increasing efficiency for the BEV. It enables BEV manufacturers to design their vehicle battery for the most common journeys decreases charging time to provide convenience and flexibility to the drivers. Adopting a rent and drop business model reduces the demand on the raw materials bridging the gap in the amount of charging (refueling) stations and extending the lifespan for the battery pack.

Delft University of Technology under its ‘‘Green Village” programme has an initiative to build a power plant (car parking lot) based on the fuel cells used in vehicles for motive power. It is a trigeneration system capable of producing electricity heat and hydrogen. It comprises three main zones: a hydrogen production zone a parking zone and a pump station zone. This study focuses mainly on the hydrogen production zone which assesses four different system designs in two different operation modes of the facility: Car as Power Plant (CaPP) mode corresponding to the open period of the facility which uses fuel cell electric vehicles (FCEVs) as energy and water producers while parked; and Pump mode corresponding to the closed period which compresses the hydrogen and pumps to the vehicle’s fuel tank. These system designs differ by the reforming technology: the existing catalytic reformer (CR) and a solid oxide fuel cell operating as reformer (SOFCR); and the option of integrating a carbon capture and storage (CCS). Results reveal that the SOFCR unit significantly reduces the exergy destruction resulting in an improvement of efficiency over 20% in SOFCR-based system designs compared to CR-based system designs in both operation modes. It also mitigates the reduction in system efficiency by integration of a CCS unit achieving a value of 2% whereas in CR-based systems is 7–8%. The SOFCR-based system running in Pump mode achieves a trigeneration efficiency of 60%.

This work investigates the cost-efficient integration of renewable hydrogen into steelworks for the production of methane and methanol as an efficient way to decarbonize the steel industry. Three case studies that utilize a mixture of steelworks off-gases (blast furnace gas coke oven gas and basic oxygen furnace gas) which differ on the amount of used off-gases as well as on the end product (methane and/or methanol) are analyzed and evaluated in terms of their economic performance. The most influential cost factors are identified and sensitivity analyses are conducted for different operating and economic parameters. Renewable hydrogen produced by PEM electrolysis is the most expensive component in this scheme and responsible for over 80% of the total costs. Progress in the hydrogen economy (lower electrolyzer capital costs improved electrolyzer efficiency and lower electricity prices) is necessary to establish this technology in the future.

In order to improve the energy efficiency of the internal combustion engine and replace fossil fuel with alternative fuels a concept of the methanol-syngas engine was proposed and the prototype was developed. Gasoline and dissociated methanol gas (GDM) were used as dual fuels and the engine performance was investigated by simulation and experiments. Dissociated methanol gas is produced by recycling the exhaust heat. The performance and combustion process was studied and compared with the gasoline engine counterpart. There is 1.9% energy efficiency improvement and 5.5% fuel consumption reduction under 2000r/min 100 N · m working condition with methanol substitution ratio of 10%. In addition the engine efficiency further improves with an increase of dissociated methanol gas substitution ratio because of the increased heating value of the fuel and effects of hydrogen. The peak pressure in the cylinder and the peak heat release rate of the GDM engine are higher than that of the original gasoline engine with a phase closer to the top dead center (TDC). Therefore blending hydrogen-rich gas in the spark-ignition engine can recycle the exhaust heat and improve the thermal efficiency of the engine.

The decarbonisation of waterborne transport is arguably the biggest challenge faced by the maritime industry presently. By 2050 the International Maritime Organization (IMO) aims to reduce greenhouse gas emissions from the shipping industry by 50% compared to 2008 with a vision to phase out fossil fuels by the end of the century as a matter of urgency. To meet such targets action must be taken immediately to address the barriers to adopt the various clean shipping options currently at different technological maturity levels. Green hydrogen as an alternative fuel presents an attractive solution to meet future targets from international bodies and is seen as a viable contributor within a future clean shipping vision. The cost of hydrogen fuel—in the shortterm at least—is higher compared to conventional fuel; therefore energy-saving devices (ESDs) for ships are more important than ever as implementation of rules and regulations restrict the use of fossil fuels while promoting zero-emission technology. However existing and emerging ESDs in standalone/combination for traditional fossil fuel driven vessels have not been researched to assess their compatibility for hydrogen-powered ships which present new challenges and considerations within their design and operation. Therefore this review aims to bridge that gap by firstly identifying the new challenges that a hydrogen-powered propulsion system brings forth and then reviewing the quantitative energy saving capability and qualitive additional benefits of individual existing and emerging ESDs in standalone and combination with recommendations for the most applicable ESD combinations with hydrogen-powered waterborne transport presented to maximise energy saving and minimise the negative impact on the propulsion system components. In summary the most compatible combination ESDs for hydrogen will depend largely on factors such as vessel types routes propulsion operation etc. However the mitigation of load fluctuations commonly encountered during a vessels operation was viewed to be a primary area of interest as it can have a negative impact on hydrogen propulsion system components such as the fuel cell; therefore the ESD combination that can maximise energy savings as well as minimise the fluctuating loads experienced would be viewed as the most compatible with hydrogen-powered waterborne transport.

Hydrogen is a promising fuel to decarbonize aviation but macroeconomic studies are currently missing. Computable general equilibrium (CGE) models are suitable to conduct macroeconomic analyses and are frequently employed in hydrogen and aviation research. The main objective of this paper is to investigate existing CGE studies related to (a) hydrogen and (b) aviation to derive a macroeconomic research agenda for hydrogen-powered aviation. Therefore the well-established method of systematic literature review is conducted. First we provide an overview of 18 hydrogen-related and 27 aviation-related CGE studies and analyze the literature with respect to appropriate categories. Second we highlight key insights and identify research gaps for both the hydrogen and aviation-related CGE literature. Our findings comprise inter alia hydrogen’s current lack of cost competitiveness and the macroeconomic relevance of air transportation. Research gaps include among others a stronger focus on sustainable hydrogen and a more holistic perspective on the air transportation system. Third we derive implications for macroeconomic research on hydrogen-powered aviation including (I) the consideration of existing modeling approaches (II) the utilization of interdisciplinary data and scenarios (III) geographical suitability (IV) the application of diverse policy tools and (V) a holistic perspective. Our work contributes a meaningful foundation for macroeconomic studies on hydrogen-powered aviation. Moreover we recommend policymakers to address the macroeconomic perspectives of hydrogen use in air transportation.

One of the major advantages of SOFCs is their high fuel flexibility. Next to natural gas and hydrogen which are today’s most common fuels for SOFC-systems and cell-/stack-testing respectively various other fuels are applicable as well. In the literature a number of promising results show that available fuels as propane butane ammonia gasoline diesel etc. can be applied. Here the performance of an anode supported cell operated in specialized single cell test benches with different gaseous and liquid fuels and reformates thereof is presented. Fuels as ammonia dissolved urea (AddBlueTM) methane/steam and ethanol/water mixtures can directly be fed to the cell whereas propane and diesel require external reforming. It is shown that in case of a stable fuel supply the cell performance with such fuels is similar to that of appropriate mixtures of H2 N2 CO CO2 and steam if the impact of endothermic reforming or decomposition reactions is considered. Even though a stable fuel cell operation with such fuels is possible in a single cell test bench it should be pointed out that an appropriate fuel processing will be mandatory on the system level.

The proton exchange membrane fuel cell (PEMFC) is a promising device in the fields of power generation energy storage aerospace and public transportation. The hydrogen recirculation ejector with the advantages of low cost high durability and no parasitic power is the key component of PEMFC systems. However it is challenging to design a hydrogen recirculation ejector to cover the wide operating conditions of PEMFC systems. In order to design an ejector for fuel cell systems a comprehensive understanding of ejector research is required. Consequently the state-of-the-art research work on the hydrogen recirculation ejector is analyzed including characteristics of the ejector in PEM fuel cell systems geometry design and optimization different types of ejectors and a comparison between them and system integration and control. Through a comprehensive analysis of ejectors further research suggestions on designing high-performance ejectors are presented.

Decarbonisation of the energy sector is becoming increasingly more important to the reduction in climate change. Renewable energy is an effective means of reducing CO2 emissions but the fluctuation in demand and production of energy is a limiting factor. Liquid hydrogen allows for long-term storage of energy. Hydrogen quality is important for the safety and efficiency of the end user. Furthermore the quality of the hydrogen gas after liquefaction has not yet been reported. The purity of hydrogen after liquefaction was assessed against the specification of Hydrogen grade D in the ISO-14687:2019 by analysing samples taken at different locations throughout production. Sampling was carried out directly in gas cylinders and purity was assessed using multiple analytical methods. The results indicate that the hydrogen gas produced from liquefaction is of a higher purity than the starting gas with all impurities below the threshold values set in ISO-14687:2019. The amount fraction of water measured in the hydrogen sample increased with repeated sampling from the liquid hydrogen tank suggesting that the sampling system used was affected by low temperatures (−253 ◦C). These data demonstrate for the first time the impact of liquefaction on hydrogen purity assessed against ISO-14687:2019 showing that liquified hydrogen is a viable option for long-term energy storage whilst also improving quality.